OEX Starter Motor 12V 1.8KW 9 Tooth CW Denso Style DXS593

The OEX Starter Motor DXS593 is a new 12V starter motor with a 1.8kW power rating, 9 teeth, clockwise rotation and a Denso-style application. It uses a 2 hole starter mount, with 105mm mount centres, an 82mm flange diameter and 10.5mm mount hole diameter.

This unit is listed with an overall length of 218mm, a pinion diameter of 29mm and a pinion at rest measurement of 18mm. It weighs 3.5kg and is supplied as a starter motor under the OEX rotating electrical range.

OEX states its products are sourced from market leading original equipment manufacturers and aftermarket suppliers, and from ISO certified factories. This starter motor is backed by a 3 year passenger / 1 year commercial warranty, which gives a practical reference point for buyers comparing replacement options.

Key Features

• 12V starter motor
• 1.8kW power rating
• 9 tooth pinion
• Clockwise rotation
• Denso style application
• 2 hole starter mount

Specifications

• Part No.: DXS593
• Brand: OEX
• Product type: Starter motor
• Voltage: 12V
• Power rating: 1.8kW
• Rotation: CW
• Number of teeth: 9
• Suits unit make: Denso

Fitment guidance

• Fitment data supplied includes Holden applications, with coverage shown for Captiva 5, Captiva 7, Cruze and Epica.
• Holden Captiva 5 applications are shown across multiple model years from 2007 through 2015 in the supplied fitment preview.
• Holden Captiva 7 applications are shown in the supplied fitment preview, including 2007.
• Because the fitment list is partial, confirm the exact vehicle application against the part number DXS593 and the starter dimensions before ordering.

Application and Buying Notes

When replacing a starter motor, the key checks are voltage, rotation, mounting style and pinion tooth count. This unit is 12V, clockwise rotation, has 9 teeth and uses a 2 hole mount with 105mm mount centres, so those details should be matched carefully to the vehicle’s original starter.

The physical measurements matter as much as the electrical specification. The flange diameter is 82mm, the mount hole diameter is 10.5mm, the overall length is 218mm and the pinion diameter is 29mm. Those dimensions help confirm whether the starter will physically align with the bellhousing and mounting points used on the vehicle.

This starter is listed as Denso style and suits unit make Denso. That means the comparison should be made against the original unit style and measurements, not just the vehicle badge alone. A Holden application may still use different starter variants across engine or build combinations, so the part number DXS593 remains the safest reference point.

The unit is new and carries a 3 year passenger / 1 year commercial warranty. That warranty period is useful when comparing replacement choices, but it does not replace a fitment check. Confirm the vehicle’s original starter details, especially the 9 tooth count, CW rotation and 12V specification, before finalising the purchase.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS593 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 105mm, Number of Teeth 9, Pinion at Rest 18mm, Power Rating 1.8kW, Suits Unit Make Denso, Item Type Starter Motor, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Weight 3.5kg, Product Group 1 ROTATING ELECTRICAL, Part No. DXS593, Brand OEX, Description OEX Starter Motor 12V 9Th CW Denso Style, Flange Diameter 82mm, Mount Hole Diameter 10.5, Overall Length 218mm, Pinion Diameter 29mm, Rotation CW.

OEX Starter Motor 12V 9Th CW Denso Style. Part number DXS593 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS593, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include HOLDEN CAPTIVA 5, HOLDEN CAPTIVA 5 2007, HOLDEN CAPTIVA 5 2008, HOLDEN CAPTIVA 5 2009. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Please confirm fitment by checking part number DXS593, the 12V 9 tooth clockwise specification, the 2 hole mount with 105mm centres, and the vehicle application before ordering. The supplied fitment information includes selected Holden applications only and should be matched carefully to the original starter.

FAQ

What is the part number for this starter motor?

The part number is DXS593. For this listing, part number DXS593 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CAPTIVA 5, HOLDEN CAPTIVA 5 2007, HOLDEN CAPTIVA 5 2008. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 12V starter motor. For this listing, part number DXS593 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CAPTIVA 5, HOLDEN CAPTIVA 5 2007, HOLDEN CAPTIVA 5 2008. These details should still be checked against the original unit before ordering.

What rotation does this starter motor use?

It is clockwise rotation, listed as CW. For this listing, part number DXS593 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CAPTIVA 5, HOLDEN CAPTIVA 5 2007, HOLDEN CAPTIVA 5 2008. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 9 teeth. For this listing, part number DXS593 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CAPTIVA 5, HOLDEN CAPTIVA 5 2007, HOLDEN CAPTIVA 5 2008. These details should still be checked against the original unit before ordering.

What mounting style does it use?

It uses a 2 hole starter mount with 105mm mount centres. For this listing, part number DXS593 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CAPTIVA 5, HOLDEN CAPTIVA 5 2007, HOLDEN CAPTIVA 5 2008. These details should still be checked against the original unit before ordering.

What fitment information is supplied?

The supplied fitment preview includes Holden applications such as Captiva 5, Captiva 7, Cruze and Epica. The preview is partial, so the part number DXS593 and the listed dimensions should still be checked against the vehicle’s original starter. For this listing, part number DXS593 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CAPTIVA 5, HOLDEN CAPTIVA 5 2007, HOLDEN CAPTIVA 5 2008. These details should still be checked against the original unit before ordering.