OEX Starter Motor 12V 11 Tooth CW Mitsubishi Style MXS252

The OEX MXS252 is a new 12V starter motor with 11 teeth and clockwise rotation, built in a Mitsubishi style fitment. It uses a 2 hole starter mount, has a 34mm pinion diameter, and a flange diameter of 82mm.

This unit is listed with a flange to rear measurement of 210mm, pinion at rest of 8mm, and a dry clutch arrangement. At 4.68kg, it is a compact rotating electrical component designed for applications that match the listed dimensions and drive configuration.

OEX states its products are sourced from market leading Original Equipment Manufacturers and aftermarket suppliers, with supply from ISO certified factories. The part is backed by a 3 year passenger / 1 year commercial warranty, so it is worth confirming the part number MXS252 and the physical details before ordering.

Key Features

• 12V starter motor
• 11 tooth pinion
• Clockwise rotation
• Mitsubishi style
• 2 hole starter mount
• New unit

Specifications

• Brand: OEX
• Part No.: MXS252
• Type: Starter Motor
• Voltage: 12V
• Number of teeth: 11
• Rotation: CW
• Pinion diameter: 34mm
• Pinion at rest: 8mm

Verified fitment guidance

• Fitment data supplied references a broad range of applications including Nissan, Komatsu, TCM, BARKO and Toyota Industrial.
• Named applications in the supplied data include Nissan 350Z, Nissan Cefiro, Nissan Pathfinder, Nissan Skyline, Komatsu FG25T-11, Komatsu FG30T-11, TCM F15N13, TCM F20N13, TCM FCG10N, TCM FCG15N, TCM FCG18N, TCM FCG20N/23N, TCM FCG25N/28N, TCM FD20, TCM FD25, TCM FG10, TCM FG10N18, TCM FG12N, and Toyota Industrial Forklift.
• The fitment list also includes BARKO various applications and multiple year references across the listed Nissan, Komatsu, TCM and Toyota Industrial entries.
• Use the part number MXS252 together with the 12V, 11 tooth, CW, 2 hole mount and 82mm flange details to confirm suitability against the original unit.
• Do not rely on vehicle badge alone, as the supplied fitment information covers multiple makes and industrial applications rather than one single model range.

Application and Buying Notes

Before ordering, compare the old starter against the MXS252 specification set: 12V, 11 teeth, clockwise rotation, 34mm pinion diameter, 82mm flange diameter and 210mm flange to rear measurement. These measurements are the best way to avoid confusion where similar Mitsubishi style starters can differ in mounting or drive details.

The starter mount type is listed as 2 hole and the unit is marked dry clutch, so the mounting face and drive setup should be checked carefully on the vehicle or machine. The wrong mount type or incorrect pinion arrangement can prevent the starter from fitting even when the external appearance looks close.

This part is listed for a wide mix of passenger, industrial and forklift applications, including Nissan 350Z, Nissan Cefiro, Nissan Pathfinder, Nissan Skyline, Komatsu FG25T-11, Komatsu FG30T-11, several TCM models and Toyota Industrial Forklift. That makes the exact application check important, especially where the same badge line may use more than one starter option.

For a proper match, use the original starter’s part number where available, then confirm the electrical and physical details listed here. The 4.68kg weight, 8mm pinion at rest and 210mm flange to rear measurement are useful comparison points if you are replacing a failed unit and still have the old part to measure.

If you are buying for commercial or industrial equipment, pay close attention to the listed application and the warranty split of 3 years passenger and 1 year commercial. Warranty terms can be relevant to how the vehicle or machine is used, so it is sensible to confirm the intended use before purchase.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXS252 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Number of Teeth 11, Pinion Diameter 34mm, Suits Unit Make Mitsubishi, Note Flange to rear measurement = 210mm, New / Reman. New, Wet / Dry Clutch Dry.

Additional published details for cross-checking include Product Group 2 STARTER MOTORS, Part No. MXS252, Brand OEX, Description OEX Starter Motor 12V 11Th CW Mitsubishi Style, Flange Diameter 82mm, Pinion at Rest 8mm, Rotation CW, Voltage 12, Item Type Starter Motor, Starter Mount Type 2 Hole.

OEX Starter Motor 12V 11Th CW Mitsubishi Style. Part number MXS252 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number MXS252, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment using the part number MXS252 and the listed application details, along with the 12V, 11 tooth, clockwise, 2 hole mount, 82mm flange and 210mm flange to rear measurements before ordering.

FAQ

What is the part number for this starter motor?

The part number is MXS252.

Is this a new or remanufactured starter motor?

It is listed as new.

What voltage does this starter motor use?

It is a 12V starter motor.

How many teeth does the pinion have?

The pinion has 11 teeth.

What rotation does this starter motor have?

It is clockwise rotation, shown as CW.

What should I confirm before buying?

Confirm the part number MXS252, the 12V rating, 11 tooth pinion, CW rotation, 2 hole starter mount, 82mm flange diameter and 210mm flange to rear measurement against the original unit and the vehicle or machine application.