Mahle Starter Motor 24V 9 Tooth CW IM038

The Mahle Starter Motor IM038 is a new 24V starter motor with clockwise rotation, 9 teeth, and a 4kW power rating. It is listed as an OE product and is supplied as a 3-hole starter motor with a 89mm flange diameter, which are the key identifiers to check when comparing against a replacement unit.

This unit measures 313mm overall length and has mount centres of 127mm at A and 90mm at B and C, with 11mm mount hole diameter. The pinion diameter is 34mm and the pinion at rest is 48mm, so physical matching matters as much as the electrical rating when confirming suitability.

Mahle describes this starter motor as a 24V clockwise unit for the rotating electrical system group, with a dry clutch arrangement and a weight of 14.11kg. If you are replacing a starter, the part number IM038, the 24V rating, and the 9-tooth CW layout are the main reference points to verify before ordering.

Key Features

• OE product
• 24V starter motor
• Clockwise rotation (CW)
• 9-tooth pinion
• 4kW power rating
• 3-hole starter mount

Specifications

• Brand: Mahle
• Part No.: IM038
• Voltage: 24V
• Rotation: CW
• Number of teeth: 9
• Power rating: 4kW
• Starter mount type: 3 hole
• Flange diameter: 89mm

Fitment notes

• Verified fitment information supplied: DAYSWORTH PT20-SVH
• Verified fitment information supplied: DAYSWORTH PT20-SVH 1996
• Fitment data is limited, so physical and part-number confirmation is still required

Application and Buying Notes

Before ordering, check the part number IM038 against the unit being replaced, then compare the 24V electrical rating, 9-tooth pinion, and clockwise rotation. Those three points are the quickest way to rule out an obvious mismatch on a starter motor, especially where similar units may differ only in rotation or tooth count.

The mounting details are equally important on this Mahle starter motor. It uses a 3-hole mounting pattern, 89mm flange diameter, 127mm mount centres at A, 90mm at B and C, and 11mm mount holes. If those dimensions do not line up with the existing starter or housing, the unit should not be assumed to fit.

Physical size can also affect installation clearance. This unit has an overall length of 313mm, a 34mm pinion diameter, and a pinion at rest of 48mm. Those measurements help when checking space around the bellhousing, clutch area, and surrounding components before the part is fitted.

The listed application details include DAYSWORTH PT20-SVH and DAYSWORTH PT20-SVH 1996. Use those references only as guidance and confirm them against the vehicle or machine on hand, because starter fitment should always be checked against the exact application, mounting pattern, and electrical specification.

As an OE product, this starter motor is intended to match the type and layout of the original unit rather than serve as a universal replacement. The weight of 14.11kg and the dry clutch specification are useful identifiers when comparing a removed starter with the replacement part in the workshop or at the counter.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number IM038 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 127mm, Mount Centres C 90mm, Number of Teeth 9, Pinion at Rest 48mm, Power Rating 4kW, Suits Unit Make Mahle, Item Type Starter Motor.

Additional published details for cross-checking include Starter Mount Type 3 Hole, Weight 14.11kg, Product Group 1 ROTATING ELECTRICAL, Part No. IM038, Brand MAHLE, Description Mahle Starter Motor 24V 9Th CW, Flange Diameter 89mm, Mount Centres B 90mm, Mount Hole Diameter 11, Overall Length 313mm.

Mahle Starter Motor 24V 9Th CW. Part number IM038 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number IM038, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility by matching part number IM038, 24V voltage, 9-tooth CW rotation, 3-hole mount pattern, and the listed mounting measurements before purchase. Where application details are available, cross-check them against the exact vehicle or equipment to avoid ordering errors.

FAQ

What is the part number for this Mahle starter motor?

The part number listed is IM038. For this listing, part number IM038 is the main reference point. Listed voltage is 24. Published fitment references include DAYSWORTH PT20-SVH, DAYSWORTH PT20-SVH 1996. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 24V starter motor. For this listing, part number IM038 is the main reference point. Listed voltage is 24. Published fitment references include DAYSWORTH PT20-SVH, DAYSWORTH PT20-SVH 1996. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 9 teeth. For this listing, part number IM038 is the main reference point. Listed voltage is 24. Published fitment references include DAYSWORTH PT20-SVH, DAYSWORTH PT20-SVH 1996. These details should still be checked against the original unit before ordering.

What is the rotation of this starter motor?

It is clockwise rotation (CW). For this listing, part number IM038 is the main reference point. Listed voltage is 24. Published fitment references include DAYSWORTH PT20-SVH, DAYSWORTH PT20-SVH 1996. These details should still be checked against the original unit before ordering.

What mounting pattern does it use?

It uses a 3-hole starter mount, with mount centres listed at 127mm for A and 90mm for B and C. For this listing, part number IM038 is the main reference point. Listed voltage is 24. Published fitment references include DAYSWORTH PT20-SVH, DAYSWORTH PT20-SVH 1996. These details should still be checked against the original unit before ordering.

What fitment information is supplied?

The supplied application references include DAYSWORTH PT20-SVH and DAYSWORTH PT20-SVH 1996. Final fitment should still be confirmed against the existing unit and the listed dimensions. For this listing, part number IM038 is the main reference point. Listed voltage is 24. Published fitment references include DAYSWORTH PT20-SVH, DAYSWORTH PT20-SVH 1996. These details should still be checked against the original unit before ordering.