Mahle Starter Motor 12V 8 Tooth CCW MS414

The MAHLE starter motor listed here is a 12V, 8 tooth unit with CCW rotation and part number MS414. It is supplied new, not remanufactured, and is identified as a 2 hole starter motor with a 1.0kW power rating.

Key physical details include a 105mm mounting centres measurement, 66mm flange diameter, 185mm overall length, and 28mm pinion diameter. The pinion at rest is 14mm, with a 12.88 tooth pitch and a 17.0 flywheel depth specification.

This unit is described as suitable for dry clutch applications and is packaged with dimensions of 25.0 length, 13.60 height, and 16.60 width. The listed warranty is one year, which gives a clear reference point for buyers comparing replacement starter motors by part number and dimensions.

Key Features

• 12V starter motor
• 8 tooth pinion
• CCW rotation
• 1.0kW power rating
• New unit
• 2 hole starter mount

Specifications

• Brand: MAHLE
• Product type: Starter Motor
• Part No.: MS414
• Voltage: 12V
• Rotation: CCW
• Number of teeth: 8
• Power rating: 1.0kW
• Starter mount type: 2 hole

Known application groups

• BOMAG BW75
• BOMAG BW75 2012
• BOMAG BW75 2013
• MULTIONE 2 SERIES
• MULTIONE 2 SERIES 2017
• YANMAR 170F
• YANMAR 170F 2007
• YANMAR 178F

Application and Buying Notes

When replacing a starter motor, the safest approach is to match the part number MS414, then confirm the physical and electrical details against the original unit. The important checkpoints here are 12V voltage, CCW rotation, 8 teeth, 1.0kW output, and the 2 hole mounting arrangement with 105mm mount centres.

The listed dimensions matter because starter motors can look similar while differing in flange diameter, overall length, pinion size, and flywheel engagement depth. For this unit, the key measurements are 66mm flange diameter, 185mm overall length, 28mm pinion diameter, 14mm pinion at rest, and a flywheel depth figure of 17.0.

This starter is noted as a dry clutch application, so it should be checked against the vehicle or engine setup before ordering. The fitment list includes BOMAG BW75, MULTIONE 2 SERIES, and a range of YANMAR models, but compatibility still depends on matching the full application, mounting pattern, and pinion specification.

If you are replacing a failed starter, compare the mounting bores, bore diameter, tooth pitch, and rotation direction carefully. The product is a new MAHLE starter motor, and the one year warranty applies to the listed item when fitted to the correct application and used within normal service conditions.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MS414 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 105mm, Number of Teeth 8, Pinion at Rest 14mm, Power Rating 1.0kW, Suits Unit Make Mahle, New / Reman. New, Wet / Dry Clutch Dry.

Additional published details for cross-checking include Number of mounting bores 2, For flywheel depth 17.0, Packaging length 25.0, Packaging height 13.60, Product Group 2 STARTER MOTORS, Part No. MS414, Brand MAHLE, Description Mahle Starter Motor 12V 8Th CCW, Flange Diameter 66mm.

Mahle Starter Motor 12V 8Th CCW. Part number MS414 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number MS414, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include BOMAG BW75, BOMAG BW75 2012, BOMAG BW75 2013, MULTIONE 2 SERIES, MULTIONE 2 SERIES 2017, YANMAR 170F. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm compatibility by matching part number MS414, 12V voltage, CCW rotation, 8 teeth, 2 hole mounting, 105mm mount centres, and the stated application details before ordering.

FAQ

What is the part number for this starter motor?

The part number is MS414. For this listing, part number MS414 is the main reference point. Listed voltage is 12. Published fitment references include BOMAG BW75, BOMAG BW75 2012, BOMAG BW75 2013. These details should still be checked against the original unit before ordering.

What voltage does this starter motor use?

It is a 12V starter motor. For this listing, part number MS414 is the main reference point. Listed voltage is 12. Published fitment references include BOMAG BW75, BOMAG BW75 2012, BOMAG BW75 2013. These details should still be checked against the original unit before ordering.

What rotation direction is listed?

The listed rotation is CCW. For this listing, part number MS414 is the main reference point. Listed voltage is 12. Published fitment references include BOMAG BW75, BOMAG BW75 2012, BOMAG BW75 2013. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured starter motor?

It is listed as new. For this listing, part number MS414 is the main reference point. Listed voltage is 12. Published fitment references include BOMAG BW75, BOMAG BW75 2012, BOMAG BW75 2013. These details should still be checked against the original unit before ordering.

What mounting arrangement does it use?

It is a 2 hole starter motor with 2 mounting bores and 105mm mount centres. For this listing, part number MS414 is the main reference point. Listed voltage is 12. Published fitment references include BOMAG BW75, BOMAG BW75 2012, BOMAG BW75 2013. These details should still be checked against the original unit before ordering.

What fitment information is provided?

The listed application groups include BOMAG BW75, MULTIONE 2 SERIES, and several YANMAR engine/model references. Final compatibility should still be checked against the full part number and measurements. For this listing, part number MS414 is the main reference point. Listed voltage is 12. Published fitment references include BOMAG BW75, BOMAG BW75 2012, BOMAG BW75 2013. These details should still be checked against the original unit before ordering.