Mahle Starter Motor 24V 11 Tooth CCW MS115

The Mahle MS115 starter motor is a new 24V unit with 11 teeth, counter-clockwise rotation, and a 1.6kW power rating. It is listed with a 2-hole starter mount, 76mm flange diameter, 98mm mount centre to centre, and a 10.5mm mount hole diameter, so the physical mounting points need to match the vehicle application before purchase.

This starter motor uses a 35mm pinion diameter, 15mm pinion at rest, 12.38 tooth pitch, and 40.0 degree connecting angle. Those measurements matter when confirming engagement with the ring gear and checking that the starter is the correct match for the intended engine and flywheel setup.

Mahle lists this unit as suitable for dry clutch applications and for flywheel depth of 18.0. It is supplied as a new starter motor under part number MS115, and the warranty period is one year. The listing is for one each.

Key Features

• 24V starter motor
• 11 tooth pinion
• Counter-clockwise rotation
• 1.6kW power rating
• 2-hole starter mount
• New unit with one year warranty

Specifications

• Brand: Mahle
• Part number: MS115
• Product type: Starter motor
• Voltage: 24V
• Power rating: 1.6kW
• Rotation: CCW
• Number of teeth: 11
• Pinion diameter: 35mm

Compatibility guidance

• BOMAG BPR55/65D
• BOMAG BPR55/65D 2012
• HUSQVARNA CONSTRUCTION LG400
• HUSQVARNA CONSTRUCTION LG400 2018
• LOMBARDINI 15LD
• LOMBARDINI 15LD 2007

Application and Buying Notes

Before ordering, compare the part number MS115 with the starter already fitted to the machine. The listed fitment references include BOMAG BPR55/65D, HUSQVARNA CONSTRUCTION LG400, and LOMBARDINI 15LD, but the safest check is still the exact part number, mounting layout, and electrical specification on the unit being replaced.

Physical dimensions are just as important as the application name. This starter motor is 24V, rotates CCW, has 11 teeth, a 35mm pinion diameter, a 76mm flange diameter, and a 98mm mount centre to centre. If any of those details differ from the existing starter or the engine setup, the replacement should be rechecked before fitting.

The 2-hole mount and 10.5mm mount hole diameter need to line up correctly, and the 18.0 flywheel depth figure should be compared carefully with the original arrangement. The listed dry clutch compatibility should also be matched to the equipment configuration, particularly where the machine has been modified or the engine has been changed.

The environmental resistance claims and EMC compliance are useful for machines operating in exposed or harsh conditions, but they do not replace proper application checking. Confirm the starter’s overall length of 195mm, tooth pitch of 12.38, and connecting angle of 40.0 degrees if you are comparing multiple starter options for the same machine family.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MS115 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Hole Diameter 10.5, Overall Length 195mm, Pinion Diameter 35mm, Rotation CCW, Voltage 24, Mount Cnt to Cnt 98mm, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Bore O 1 10.5, Tooth Pitch 12.38, Connecting Angle [Degree] 40.0, Packaging length 25.0, Packaging height 13.60, Product Group 2 STARTER MOTORS, Part No. MS115, Brand MAHLE, Description Mahle Starter Motor 24V 11Th CCW.

Mahle Starter Motor 24V 11Th CCW. Part number MS115 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number MS115, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include BOMAG BPR55/65D, BOMAG BPR55/65D 2012, HUSQVARNA CONSTRUCTION LG400, HUSQVARNA CONSTRUCTION LG400 2018, LOMBARDINI 15LD, LOMBARDINI 15LD 2007. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment by matching part number MS115, the 24V CCW specification, the 11-tooth pinion, and the listed mounting and flywheel dimensions against the original starter and application details before purchase.

FAQ

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number MS115 is the main reference point. Listed voltage is 24. Published fitment references include BOMAG BPR55/65D, BOMAG BPR55/65D 2012, HUSQVARNA CONSTRUCTION LG400. These details should still be checked against the original unit before ordering.

What voltage is the Mahle MS115 starter motor?

The listed voltage is 24V. For this listing, part number MS115 is the main reference point. Listed voltage is 24. Published fitment references include BOMAG BPR55/65D, BOMAG BPR55/65D 2012, HUSQVARNA CONSTRUCTION LG400. These details should still be checked against the original unit before ordering.

Which way does this starter rotate?

It is listed as counter-clockwise, or CCW. For this listing, part number MS115 is the main reference point. Listed voltage is 24. Published fitment references include BOMAG BPR55/65D, BOMAG BPR55/65D 2012, HUSQVARNA CONSTRUCTION LG400. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The starter is listed with 11 teeth. For this listing, part number MS115 is the main reference point. Listed voltage is 24. Published fitment references include BOMAG BPR55/65D, BOMAG BPR55/65D 2012, HUSQVARNA CONSTRUCTION LG400. These details should still be checked against the original unit before ordering.

What mounting style does this starter use?

It uses a 2-hole starter mount with 2 mounting bores and a 10.5mm mount hole diameter. For this listing, part number MS115 is the main reference point. Listed voltage is 24. Published fitment references include BOMAG BPR55/65D, BOMAG BPR55/65D 2012, HUSQVARNA CONSTRUCTION LG400. These details should still be checked against the original unit before ordering.

What should I check before buying if I am replacing an existing starter?

Check the part number MS115, the 24V CCW specification, the 11-tooth pinion, and the listed mounting and size details such as 76mm flange diameter, 98mm mount centre to centre, and 195mm overall length. For this listing, part number MS115 is the main reference point. Listed voltage is 24. Published fitment references include BOMAG BPR55/65D, BOMAG BPR55/65D 2012, HUSQVARNA CONSTRUCTION LG400. These details should still be checked against the original unit before ordering.