Mahle Starter Motor 12V 11 Tooth CCW MS116

The Mahle starter motor MS116 is a new 12V starter motor with 11 teeth, counter-clockwise rotation, and a 1.2kW power rating. It is listed as a 2-hole starter motor with a reduction gear transmission, which are the key details to check against the original unit before ordering.

Important physical dimensions include a 96mm mount centres A measurement, 100.0 mounting points diameter, 76mm flange diameter, 220mm overall length, and a 35mm pinion diameter. The pinion at rest is 15mm, the mount hole diameter is 10.5mm, and the bore O 1 is also 10.5mm.

This starter is identified as Mahle part number MS116 and is supplied as a new unit with a one year warranty. It is described as suitable for Mahle applications, and the listed fitment data also references BOMAG BPR45/55D, Husqvarna Construction LG400, and Lombardini 15LD and Ecowind applications.

Key Features

• 12V starter motor
• 11 tooth pinion
• Counter-clockwise rotation
• 1.2kW power rating
• 2-hole starter mount
• Reduction gear design

Specifications

• Part number: MS116
• Brand: Mahle
• Product type: Starter motor
• Voltage: 12V
• Rotation: CCW
• Number of teeth: 11
• Power rating: 1.2kW
• Starter mount type: 2 hole

Known application references

• BOMAG BPR45/55D
• BOMAG BPR45/55D 2012
• Husqvarna Construction LG400
• Husqvarna Construction LG400 2018
• Lombardini 15LD
• Lombardini 15LD 2007
• Lombardini Ecowind
• Lombardini Ecowind 2007

Application and Buying Notes

When comparing this starter motor to the original unit, the most important checks are the part number MS116, the 12V voltage, 11-tooth pinion, CCW rotation, and the 2-hole mounting arrangement. The measured dimensions matter as well, especially the 96mm mount centres A, 100.0 mounting points diameter, 76mm flange diameter, and 220mm overall length.

The listed application references point to BOMAG, Husqvarna Construction, and Lombardini equipment, but they should be treated as confirmation points rather than a substitute for checking the machine itself. The most useful cross-checks are the starter mount type, mount hole diameter of 10.5mm, pinion diameter of 35mm, and the pinion at rest measurement of 15mm.

Because this is a reduction gear starter, it is important to confirm the original starter configuration before fitting. The fact that it is a new unit with a one year warranty gives a clear purchase reference, but the correct application still depends on matching the physical layout and electrical specification to the existing starter on the machine.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MS116 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 96mm, Number of Teeth 11, Pinion at Rest 15mm, Power Rating 1.2kW, Suits Unit Make Mahle, Item Type Starter Motor, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Transmission Type with reduction gear, Number of mounting bores 2, For flywheel depth 18.0, Mounting points diameter 100.0, Packaging width 16.60, Net Weight 3880, Product Group 1 ROTATING ELECTRICAL, Part No. MS116, Brand MAHLE, Description Mahle Starter Motor 12V 11Th CCW.

Mahle Starter Motor 12V 11Th CCW. Part number MS116 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number MS116, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include BOMAG BPR45/55D, BOMAG BPR45/55D 2012, HUSQVARNA CONSTRUCTION LG400, HUSQVARNA CONSTRUCTION LG400 2018, LOMBARDINI 15LD, LOMBARDINI 15LD 2007. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm fitment by matching Mahle part number MS116, the 12V CCW specification, 11 teeth, 2-hole mounting, and the listed dimensions against the existing starter and machine application before purchase.

FAQ

Is this starter motor new or remanufactured?

It is listed as new, not remanufactured. For this listing, part number MS116 is the main reference point. Listed voltage is 12. Published fitment references include BOMAG BPR45/55D, BOMAG BPR45/55D 2012, HUSQVARNA CONSTRUCTION LG400. These details should still be checked against the original unit before ordering.

What is the part number for this starter motor?

The part number is MS116. For this listing, part number MS116 is the main reference point. Listed voltage is 12. Published fitment references include BOMAG BPR45/55D, BOMAG BPR45/55D 2012, HUSQVARNA CONSTRUCTION LG400. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 12V starter motor. For this listing, part number MS116 is the main reference point. Listed voltage is 12. Published fitment references include BOMAG BPR45/55D, BOMAG BPR45/55D 2012, HUSQVARNA CONSTRUCTION LG400. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 11 teeth. For this listing, part number MS116 is the main reference point. Listed voltage is 12. Published fitment references include BOMAG BPR45/55D, BOMAG BPR45/55D 2012, HUSQVARNA CONSTRUCTION LG400. These details should still be checked against the original unit before ordering.

What rotation does this starter motor have?

It is counter-clockwise, shown as CCW. For this listing, part number MS116 is the main reference point. Listed voltage is 12. Published fitment references include BOMAG BPR45/55D, BOMAG BPR45/55D 2012, HUSQVARNA CONSTRUCTION LG400. These details should still be checked against the original unit before ordering.

Which applications are listed with this starter motor?

The listed application references include BOMAG BPR45/55D, Husqvarna Construction LG400, and Lombardini 15LD and Ecowind applications. For this listing, part number MS116 is the main reference point. Listed voltage is 12. Published fitment references include BOMAG BPR45/55D, BOMAG BPR45/55D 2012, HUSQVARNA CONSTRUCTION LG400. These details should still be checked against the original unit before ordering.