Mahle Starter Motor 12V 10T CCW MS135

The Mahle Starter Motor MS135 is a new 12V starter motor with 10 teeth and counter-clockwise rotation. It is listed as a 1kW unit with a 2-hole starter mount, 98mm mount centres, and a 70mm flange diameter, so the physical mounting dimensions should be checked carefully against the vehicle or engine application before ordering.

This unit is supplied as each and carries a one-year warranty. Key dimensions include an overall length of 195mm, a 32.5mm pinion diameter, a 15mm pinion at rest, and a 40.0-degree connecting angle. The mount hole diameter is 11mm and the bore O 1 measurement is 10.5mm.

The starter is identified as Mahle part number MS135 and is described as a 12V 10-throttle? CCW unit in the product naming, with the verified technical detail being 10 teeth and CCW rotation. It is intended for applications that match those specifications, including the listed LOMBARDINI 15LD fitment references, but the part number and mounting details should always be confirmed first.

Key Features

• 12V starter motor
• 10-tooth pinion
• Counter-clockwise rotation
• 1kW power rating
• 2-hole starter mount
• New unit

Specifications

• Voltage: 12V
• Power rating: 1kW
• Rotation: CCW
• Number of teeth: 10
• Starter mount type: 2 hole
• Mount centres A: 98mm
• Flange diameter: 70mm
• Overall length: 195mm

Confirmed fitment references

• LOMBARDINI 15LD
• LOMBARDINI 15LD 2007

Application and Buying Notes

Before ordering, compare the MS135 part number, the 12V electrical specification, and the 10-tooth CCW configuration with the original starter on the machine or engine. The mounting layout is also important here: this starter uses a 2-hole mount, 98mm mount centres, an 11mm mount hole diameter, and a 70mm flange diameter.

The physical size matters as much as the electrical rating. Check the 195mm overall length, 32.5mm pinion diameter, 15mm pinion at rest, and 18.0mm flywheel depth against the existing unit and the available clearance around the starter location.

If you are replacing a starter on a LOMBARDINI 15LD application, use the engine model and the part number together. Variations in mounting position, flywheel depth, or pinion engagement can affect compatibility even where the general engine family appears similar.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MS135 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 98mm, Number of Teeth 10, Pinion at Rest 15mm, Power Rating 1kW, Suits Unit Make Mahle, Item Type Starter Motor, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Bore O 1 10.5, Tooth Pitch 12.37, Connecting Angle [Degree] 40.0, Packaging length 25.0, Packaging height 13.60, Product Group 2 STARTER MOTORS, Part No. MS135, Brand MAHLE, Description Mahle Starter Motor 12V 10Th CCW.

Mahle Starter Motor 12V 10Th CCW. Part number MS135 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number MS135, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include LOMBARDINI 15LD, LOMBARDINI 15LD 2007. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm fitment by matching Mahle MS135, 12V, 10 teeth, CCW rotation, and the listed mounting and dimensional details with the existing starter and application before purchase.

FAQ

What is the part number for this starter motor?

The listed part number is MS135. For this listing, part number MS135 is the main reference point. Listed voltage is 12. Published fitment references include LOMBARDINI 15LD, LOMBARDINI 15LD 2007. These details should still be checked against the original unit before ordering.

What voltage does this starter motor use?

It is a 12V starter motor. For this listing, part number MS135 is the main reference point. Listed voltage is 12. Published fitment references include LOMBARDINI 15LD, LOMBARDINI 15LD 2007. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 10 teeth. For this listing, part number MS135 is the main reference point. Listed voltage is 12. Published fitment references include LOMBARDINI 15LD, LOMBARDINI 15LD 2007. These details should still be checked against the original unit before ordering.

What direction does it rotate?

The starter is CCW, or counter-clockwise, rotation. For this listing, part number MS135 is the main reference point. Listed voltage is 12. Published fitment references include LOMBARDINI 15LD, LOMBARDINI 15LD 2007. These details should still be checked against the original unit before ordering.

What mounting style does it use?

It uses a 2-hole starter mount with 98mm mount centres and an 11mm mount hole diameter. For this listing, part number MS135 is the main reference point. Listed voltage is 12. Published fitment references include LOMBARDINI 15LD, LOMBARDINI 15LD 2007. These details should still be checked against the original unit before ordering.

Is fitment listed for any applications?

Yes. The provided fitment references include LOMBARDINI 15LD and LOMBARDINI 15LD 2007. For this listing, part number MS135 is the main reference point. Listed voltage is 12. Published fitment references include LOMBARDINI 15LD, LOMBARDINI 15LD 2007. These details should still be checked against the original unit before ordering.