OEX Starter Motor 24V 9T CW Bosch Style BXS9035

The OEX Starter Motor BXS9035 is a new 24V starter motor with 9 teeth, clockwise rotation, and a Bosch-style suitment profile. It is listed with a 6.6kW power rating, a 3-hole starter mount type, and a 407mm overall length, so it is important to compare the electrical and physical details carefully before ordering.

Key dimensions on this unit include 126mm mount centres for A, B and C, a 92mm flange diameter, 13mm mount hole diameter, 35mm pinion diameter, and 48mm pinion at rest. Those measurements matter when matching against the original starter and the engine or bellhousing setup already fitted to the vehicle or equipment.

This starter is noted as suitable for Bosch units and carries the KB Series note, including non-insulated return. It is also marked dry clutch compatible, weighs 19kg, and is backed by a 3-year passenger / 1-year commercial warranty, making the part number BXS9035 the most reliable reference when checking compatibility.

Key Features

• 24V starter motor
• 9-tooth pinion
• Clockwise rotation
• Bosch style suitment
• New unit
• 3-hole starter mount

Specifications

• Power rating: 6.6kW
• Voltage: 24V
• Number of teeth: 9
• Rotation: CW
• Suits unit make: Bosch
• Starter mount type: 3 hole
• Overall length: 407mm
• Flange diameter: 92mm

Confirmed fitment references

• BERTRAM 630
• CLAAS JAGUAR
• CLAAS JAGUAR 1990
• DAEWOO INDUSTRIAL MEGA 160-III
• DAEWOO INDUSTRIAL MEGA 160-III 1997
• DAEWOO INDUSTRIAL MEGA 300-III
• DAEWOO INDUSTRIAL MEGA 300-III 1997
• DAEWOO INDUSTRIAL SOLAR 170-V

Application and Buying Notes

Use the part number BXS9035 first when confirming whether this starter matches your application, then compare the Bosch-style fitment, 24V system requirement, 9-tooth pinion, and clockwise rotation. The starter is a 3-hole mount design with 126mm mount centres and a 92mm flange diameter, so it needs to line up correctly with the existing mounting points and housing.

The unit has a 35mm pinion diameter and a 48mm pinion at rest, which are practical checks when comparing against the removed starter. If the original unit differs in tooth count, rotation, flange size, or mount centre measurement, do not assume interchangeability. Starter compatibility is often decided by these physical details rather than by appearance alone.

The note for this part says KB Series and non-insulated return. That makes the electrical arrangement worth checking on the vehicle or machine before purchase, especially on older commercial, industrial, and marine applications where similar-looking starters can use different return arrangements. The listed weight of 19kg also gives a useful sense of the unit size when comparing against the existing part.

The fitment references include BERTRAM, CLAAS, DAEWOO INDUSTRIAL, MAN, MERCEDES-BENZ, and SEARAY applications, but the safest approach is still to verify the exact model, year, and starter details on the current unit. If you are working from a removed starter, compare the original label, mounting pattern, tooth count, and voltage rating before ordering.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number BXS9035 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 126mm, Mount Centres C 126mm, Number of Teeth 9, Pinion at Rest 48mm, Power Rating 6.6kW, Suits Unit Make Bosch, Note KB Series. Unit has non 'insulated return'..

Additional published details for cross-checking include New / Reman. New, Wet / Dry Clutch Dry, Product Group 2 STARTER MOTORS, Part No. BXS9035, Brand OEX, Description OEX Starter Motor 24V 9Th CW Bosch Style, Flange Diameter 92mm, Mount Centres B 126mm, Mount Hole Diameter 13.

OEX Starter Motor 24V 9Th CW Bosch Style. Part number BXS9035 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number BXS9035, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include BERTRAM 630, CLAAS JAGUAR, CLAAS JAGUAR 1990, DAEWOO INDUSTRIAL MEGA 160-III, DAEWOO INDUSTRIAL MEGA 160-III 1997, DAEWOO INDUSTRIAL MEGA 300-III. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm compatibility by matching part number BXS9035, 24V voltage, 9-tooth clockwise Bosch-style specification, 3-hole mount pattern, and the stated dimensions against the existing starter and application details before purchase.

FAQ

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number BXS9035 is the main reference point. Listed voltage is 24. Published fitment references include BERTRAM 630, CLAAS JAGUAR, CLAAS JAGUAR 1990. These details should still be checked against the original unit before ordering.

What voltage is the OEX BXS9035 starter motor?

The voltage is 24V. For this listing, part number BXS9035 is the main reference point. Listed voltage is 24. Published fitment references include BERTRAM 630, CLAAS JAGUAR, CLAAS JAGUAR 1990. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

It has 9 teeth. For this listing, part number BXS9035 is the main reference point. Listed voltage is 24. Published fitment references include BERTRAM 630, CLAAS JAGUAR, CLAAS JAGUAR 1990. These details should still be checked against the original unit before ordering.

What is the rotation direction?

The rotation is clockwise (CW). For this listing, part number BXS9035 is the main reference point. Listed voltage is 24. Published fitment references include BERTRAM 630, CLAAS JAGUAR, CLAAS JAGUAR 1990. These details should still be checked against the original unit before ordering.

What warranty is listed for this starter motor?

The listed warranty is 3 years for passenger use and 1 year for commercial use. For this listing, part number BXS9035 is the main reference point. Listed voltage is 24. Published fitment references include BERTRAM 630, CLAAS JAGUAR, CLAAS JAGUAR 1990. These details should still be checked against the original unit before ordering.

What should I check before ordering this starter?

Check the part number BXS9035, 24V system requirement, 9-tooth count, CW rotation, Bosch-style suitment, 3-hole mount type, and the listed dimensions including 126mm mount centres and 92mm flange diameter. For this listing, part number BXS9035 is the main reference point. Listed voltage is 24. Published fitment references include BERTRAM 630, CLAAS JAGUAR, CLAAS JAGUAR 1990. These details should still be checked against the original unit before ordering.