Mahle Starter Motor 12V 9 Tooth CW IM267

The MAHLE starter motor listed here is a 12V unit with 9 teeth, clockwise rotation, and part number IM267. It is a new starter motor, supplied each, and the stated power rating is 2kW.

Key physical details are provided for checking against your existing unit before purchase: 110mm mount centres, 74mm flange diameter, 11mm mount hole diameter, 235mm overall length, and a 29mm pinion diameter. The pinion at rest measurement is 20mm.

This starter is described as an OE product and is listed for a dry clutch application. If you are comparing replacements, the combination of 12 volt, 9 tooth, CW rotation, and IM267 is the safest starting point for identification.

It carries a one year warranty and has a listed weight of 4.24kg. For rotating electrical parts, matching the part number and the mounting measurements is just as important as matching the electrical rating.

Key Features

• MAHLE starter motor
• 12V electrical system
• 9 tooth pinion
• Clockwise rotation
• 2kW power rating
• OE product

Specifications

• Part number: IM267
• Brand: MAHLE
• Type: Starter motor
• Voltage: 12V
• Rotation: CW
• Number of teeth: 9
• Power rating: 2kW
• Starter mount type: 2 hole

Fitment and application guidance

• ATLAS COPCO XAS185
• CASE IH
• CASE IH DX
• CASE SR130
• CASE SR150
• CASE SR175
• CASE SV185
• CATERPILLAR 216B

Application and Buying Notes

Before ordering, compare the listed part number IM267 with the starter on your machine, then check the mounting pattern and dimensions: 2 hole mount type, 110mm mount centres, 74mm flange diameter, and 11mm mount hole diameter. These measurements are the practical checks that help avoid a mismatch when replacing a starter motor.

The electrical side also needs to line up. This unit is 12V with a 2kW power rating and 9 teeth, so it should only be considered where those details match the original application. The clockwise rotation matters as well, because starter rotation must suit the engine and mounting arrangement.

The fitment information includes a broad set of equipment and model families, including Atlas Copco XAS185, Case IH, Caterpillar 216B through 247B variants, Ford 1000-Series, New Holland 2120 and 3415, Perkins 403D-11, and Shibaura ST329 through ST445. Even with those application references, confirmation against the existing unit remains the best way to buy with confidence.

As with any starter replacement, do not rely on one detail alone. A 12V starter with the wrong tooth count, mount centres, or pinion dimensions can still be the wrong part for the job. Check the dry clutch application note, the 235mm overall length, and the 29mm pinion diameter before fitting.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number IM267 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 110mm, Number of Teeth 9, Pinion at Rest 20mm, Power Rating 2kW, Suits Unit Make Mahle, Item Type Starter Motor, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Weight 4.24kg, Product Group 1 ROTATING ELECTRICAL, Part No. IM267, Brand MAHLE, Description Mahle Starter Motor 12V 9Th CW, Flange Diameter 74mm, Mount Hole Diameter 11, Overall Length 235mm, Pinion Diameter 29mm, Rotation CW.

Mahle Starter Motor 12V 9Th CW. Part number IM267 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number IM267, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include ATLAS COPCO XAS185, ATLAS COPCO XAS185 2009, CASE IH, CASE IH DX, CASE IH DX 2004, CASE IH DX 2005. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm compatibility by matching part number IM267, the 12V 9 tooth clockwise specification, and the mounting and dimension details against your existing starter and application records before ordering.

FAQ

What is the part number for this starter motor?

The part number listed is IM267. For this listing, part number IM267 is the main reference point. Listed voltage is 12. Published fitment references include ATLAS COPCO XAS185, ATLAS COPCO XAS185 2009, CASE IH. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 12V starter motor. For this listing, part number IM267 is the main reference point. Listed voltage is 12. Published fitment references include ATLAS COPCO XAS185, ATLAS COPCO XAS185 2009, CASE IH. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 9 teeth. For this listing, part number IM267 is the main reference point. Listed voltage is 12. Published fitment references include ATLAS COPCO XAS185, ATLAS COPCO XAS185 2009, CASE IH. These details should still be checked against the original unit before ordering.

What is the rotation direction?

The starter rotates clockwise, shown as CW. For this listing, part number IM267 is the main reference point. Listed voltage is 12. Published fitment references include ATLAS COPCO XAS185, ATLAS COPCO XAS185 2009, CASE IH. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured unit?

It is listed as new. For this listing, part number IM267 is the main reference point. Listed voltage is 12. Published fitment references include ATLAS COPCO XAS185, ATLAS COPCO XAS185 2009, CASE IH. These details should still be checked against the original unit before ordering.

What warranty is supplied?

The warranty listed is one year. For this listing, part number IM267 is the main reference point. Listed voltage is 12. Published fitment references include ATLAS COPCO XAS185, ATLAS COPCO XAS185 2009, CASE IH. These details should still be checked against the original unit before ordering.