OEX Starter Motor 12V 10T CW Mitsubishi Style MXS2070

The OEX MXS2070 is a new 12V starter motor with clockwise rotation and a 10 tooth pinion, listed as Mitsubishi style and suited to Mitsubishi applications. It is a 3 hole starter mount type with M10 mount hole diameter, and the critical dimensions include 71mm mount centres A, 67mm mount centres C, 113mm mount centres B, 63mm nose cone length, and 222mm overall length.

This starter motor is rated at 1.4kW and uses a 28mm pinion diameter with 8mm pinion at rest. Those measurements are important when checking space, alignment, and whether the unit matches the starter position on the vehicle. The unit is supplied as new, not remanufactured, and is listed for dry clutch applications.

OEX identifies this part as part no. MXS2070, with suitment shown for Mitsubishi. The note supplied with the product says to confirm by the OE number, and for extended right angle battery and switch terminal use MXS2101. That makes the exact OE reference and terminal arrangement important before ordering.

Key Features

• New starter motor, not remanufactured
• 12V, clockwise rotation
• 10 tooth pinion
• 3 hole starter mount
• Mitsubishi style application
• Dry clutch use

Specifications

• Voltage: 12V
• Power rating: 1.4kW
• Rotation: CW
• Number of teeth: 10
• Pinion diameter: 28mm
• Pinion at rest: 8mm
• Overall length: 222mm
• Nose cone length: 63mm

Fitment guidance

• DODGE: AVENGER, AVENGER 2007, AVENGER 2008, AVENGER 2009, AVENGER 2010, plus other listed applications

Application and Buying Notes

Start by matching the part number MXS2070 and the OE number on the vehicle side, because the listing specifically says to confirm by OE number. The product is described as Mitsubishi style and suits Mitsubishi, but the fitment data supplied here does not provide a verified vehicle model list for this exact part.

Check the mounting pattern before ordering. The listed 3 hole starter mount, M10 mount hole diameter, 71mm mount centres A, 67mm mount centres C, and 113mm mount centres B need to match the original starter installation. The 63mm nose cone length and 222mm overall length also matter where starter clearance is tight.

Confirm the electrical and drive details match your application. This unit is 12V, clockwise rotation, with a 10 tooth pinion and 28mm pinion diameter, so it needs to align with the ring gear and the original starter specification. The note about extended right angle battery and switch terminal means MXS2101 should be checked if that terminal layout is required.

OEX states its products are sourced from market leading original equipment manufacturers and aftermarket suppliers, and from ISO certified factories. Even with that manufacturing support, fitment still depends on the exact application, so matching the vehicle’s starter layout, terminal arrangement, and OE number remains the key check.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXS2070 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 71mm, Mount Centres C 67mm, Nose Cone Length 63mm, Overall Length 222mm, Pinion Diameter 28mm, Rotation CW, Voltage 12.

Additional published details for cross-checking include New / Reman. New, Wet / Dry Clutch Dry, Product Group 1 ROTATING ELECTRICAL, Part No. MXS2070, Brand OEX, Description OEX Starter Motor 12V 10Th CW Mitsubishi Style, Flange Diameter 82mm, Mount Centres B 113mm, Mount Hole Diameter M10, Number of Teeth 10.

OEX Starter Motor 12V 10Th CW Mitsubishi Style. Part number MXS2070 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number MXS2070, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include DODGE AVENGER, DODGE AVENGER 2007, DODGE AVENGER 2008, DODGE AVENGER 2009. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Please confirm fitment using part number MXS2070, the OE number, and the vehicle’s starter mounting and terminal details before ordering. If the original starter differs in mount pattern, rotation, tooth count, or terminal arrangement, compare those details carefully against this unit or consider the MXS2101 note where an extended right angle battery and switch terminal is needed.

FAQ

What is the part number for this starter motor?

The part number listed is MXS2070. For this listing, part number MXS2070 is the main reference point. Listed voltage is 12. Published fitment references include DODGE AVENGER, DODGE AVENGER 2007, DODGE AVENGER 2008. These details should still be checked against the original unit before ordering.

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number MXS2070 is the main reference point. Listed voltage is 12. Published fitment references include DODGE AVENGER, DODGE AVENGER 2007, DODGE AVENGER 2008. These details should still be checked against the original unit before ordering.

What voltage and rotation does it use?

It is a 12V starter motor with clockwise rotation. For this listing, part number MXS2070 is the main reference point. Listed voltage is 12. Published fitment references include DODGE AVENGER, DODGE AVENGER 2007, DODGE AVENGER 2008. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 10 teeth. For this listing, part number MXS2070 is the main reference point. Listed voltage is 12. Published fitment references include DODGE AVENGER, DODGE AVENGER 2007, DODGE AVENGER 2008. These details should still be checked against the original unit before ordering.

What mounting style does it use?

It uses a 3 hole starter mount with M10 mount hole diameter. For this listing, part number MXS2070 is the main reference point. Listed voltage is 12. Published fitment references include DODGE AVENGER, DODGE AVENGER 2007, DODGE AVENGER 2008. These details should still be checked against the original unit before ordering.

What should I check before buying?

Confirm the OE number, part number MXS2070, and match the mounting dimensions, rotation, tooth count, and terminal arrangement to the original unit. For this listing, part number MXS2070 is the main reference point. Listed voltage is 12. Published fitment references include DODGE AVENGER, DODGE AVENGER 2007, DODGE AVENGER 2008. These details should still be checked against the original unit before ordering.