Genuine Starter Motor 12V 11TH Autolite Stop Start JB3Z11002E

The Genuine Products starter motor listed here is a 12V unit for Autolite applications, identified by part number JB3Z11002E. It is an 11-tooth starter with a pad mount type, 89mm mount centres, 10.5mm mount hole diameter, and an overall length of 247mm.

It is a new unit, supplied by Genuine Products, with a one year warranty. The stated rotation is clockwise, the pinion diameter is 34.5mm, and the pinion at rest measurement is 25mm.

With a unit weight of 4.2kg and dry clutch configuration, this starter sits in the rotating electrical category and is intended for buyers who need a direct replacement checked against the exact part number and application details.

Key Features

• 12V starter motor
• 11-tooth pinion
• Autolite unit make
• Stop start applications only
• Extended spline shaft drive
• Pad mount type

Specifications

• Part No.: JB3Z11002E
• Brand: Genuine Products
• Type: Starter motor
• Voltage: 12V
• Number of Teeth: 11
• Suits Unit Make: Autolite
• Starter Mount Type: Pad
• Rotation: CW

Verified fitment references

• Ford Everest
• Ford Ranger

Application and Buying Notes

Before ordering, confirm the part number JB3Z11002E against the starter removed from the vehicle or the vehicle parts catalogue. The listed dimensions are specific: 12V, 11 teeth, 89mm mount centres, 10.5mm mount hole diameter, 247mm overall length, and a 34.5mm pinion diameter.

This starter is described for Autolite applications and uses a pad mount with clockwise rotation. Those application details should be checked carefully before purchase, especially if the replacement is being matched by appearance alone.

If you are comparing against an existing unit, the pinion at rest measurement of 25mm, the dry clutch setup, and the 4.2kg weight can help confirm you are looking at the same style of starter. Matching these details reduces the chance of ordering the wrong part.

The verified fitment references supplied with this product include Ford Everest and Ford Ranger. That is a useful guide, but the safest approach is still to check the exact application, year, engine configuration where relevant, and the part number on the vehicle or old unit.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number JB3Z11002E helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Hole Diameter 10.5, Overall Length 247mm, Pinion Diameter 34.5mm, Suits Unit Make Autolite, Note STOP START APPLICATIONS ONLY - DRIVE HAS EXTENDED SPLINE SHAFT, Starter Mount Type Pad, Weight 4.2kg.

Additional published details for cross-checking include Product Group 1 ROTATING ELECTRICAL, Part No. JB3Z11002E, Brand GENUINE PRODUCTS, Description Genuine Starter Motor 12V 11Th Autolite Stop Start, Mount Centres A 89mm, Number of Teeth 11, Pinion at Rest 25mm, Rotation CW, Voltage 12, New / Reman. New.

Genuine Starter Motor 12V 11Th Autolite Stop Start. Part number JB3Z11002E should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number JB3Z11002E, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019, FORD EVEREST 2020. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment using part number JB3Z11002E, the stop start application note, and the listed dimensions before ordering. Ford Everest and Ford Ranger are referenced, but exact compatibility should be checked against the vehicle application and the original starter details.

FAQ

What type of starter motor is this?

It is a Genuine Products starter motor, 12V, with an 11-tooth pinion and pad mount type. For this listing, part number JB3Z11002E is the main reference point. Listed voltage is 12. Published fitment references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019. These details should still be checked against the original unit before ordering.

What part number should I match?

The listed part number is JB3Z11002E. Matching that number is the safest way to confirm you are ordering the correct unit. For this listing, part number JB3Z11002E is the main reference point. Listed voltage is 12. Published fitment references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019. These details should still be checked against the original unit before ordering.

Is this starter for standard applications?

No. It is listed for stop start applications only and has an extended spline shaft drive. For this listing, part number JB3Z11002E is the main reference point. Listed voltage is 12. Published fitment references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019. These details should still be checked against the original unit before ordering.

What are the main dimensions?

The listed dimensions are 247mm overall length, 89mm mount centres, 10.5mm mount hole diameter, and a 34.5mm pinion diameter. For this listing, part number JB3Z11002E is the main reference point. Listed voltage is 12. Published fitment references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019. These details should still be checked against the original unit before ordering.

Which vehicles are referenced for fitment?

The supplied fitment references include Ford Everest and Ford Ranger. For this listing, part number JB3Z11002E is the main reference point. Listed voltage is 12. Published fitment references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019. These details should still be checked against the original unit before ordering.

What warranty is included?

The warranty listed is one year. For this listing, part number JB3Z11002E is the main reference point. Listed voltage is 12. Published fitment references include FORD EVEREST, FORD EVEREST 2018, FORD EVEREST 2019. These details should still be checked against the original unit before ordering.