Mahle Starter Motor 12V 10 Tooth CW MS94

The Mahle starter motor MS94 is a new 12V unit with 10 teeth and clockwise rotation, built for applications that match the listed mounting and drive dimensions. It is an original equipment part and is supplied as a starter motor with reduction gear transmission type.

Key identifying details include 4.2kW power rating, 3 hole starter mount type, 127mm mount centres A, 90mm mount centres B/C, and an overall length of 320mm. The pinion at rest is 48mm, with a 39mm pinion diameter and 15.42 tooth pitch.

This unit is listed under Mahle, part number MS94, and also shows OEM number 11131375. It is a 12 volt, clockwise rotating starter motor intended for matching applications where the physical dimensions and electrical specification align exactly.

Key Features

• Original Equipment part
• New starter motor
• 12V electrical system
• 10 tooth pinion
• Clockwise rotation
• 4.2kW power rating

Specifications

• Brand: Mahle
• Part No.: MS94
• OEM Number: 11131375
• Type: Starter Motor
• Voltage: 12V
• Power Rating: 4.2kW
• Rotation: CW
• Number of Teeth: 10

Verified fitment references

• BELARUS 1222 John Deere engine
• BELL 700J
• CLAAS ARES
• CLAAS ARION
• CLAAS ARION 2012
• CLARK 843
• HITACHI LX120
• JOHN DEERE 1070D

Application and Buying Notes

Before ordering, compare the part number MS94 and OEM number 11131375 with the unit being replaced. The listed dimensions matter just as much as the electrical spec: this starter is 12V, 4.2kW, clockwise rotation, and uses a 10 tooth pinion with 127mm mount centres A and 90mm mount centres B/C.

The mounting arrangement should be checked carefully. This starter motor uses a 3 hole mount, an 89mm flange diameter, 11mm mount holes, and an overall length of 320mm. If any of those points differ from the removed unit, it may not seat or engage correctly.

The fitment list includes a number of agricultural and industrial applications, but compatibility still needs to be confirmed against the vehicle or machine identification and the starter already fitted. Where the application is a retrofit or replacement from another supplier, matching the mounting pattern, pinion tooth count, rotation, and voltage is essential.

The unit is listed as an original equipment part and is supplied new, with a one year warranty. That gives a useful quality and service reference, but the correct physical match remains the deciding factor for installation.

If you are unsure, compare the old starter side by side with the listed measurements before fitting. Pay close attention to the 48mm pinion at rest, 39mm pinion diameter, and the 15.42 tooth pitch, as these details affect engagement and compatibility.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MS94 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 127mm, Mount Centres C 90mm, Number of Teeth 10, Pinion at Rest 48mm, Power Rating 4.2kW, Suits Unit Make Mahle, Item Type Starter Motor.

Additional published details for cross-checking include Starter Mount Type 3 Hole, Transmission Type with reduction gear, Bore O 1 10.9, Tooth Pitch 15.42, Mounting points diameter 127.0, Packaging width 21.50, Net Weight 10887, Product Group 1 ROTATING ELECTRICAL, Part No. MS94, Brand MAHLE.

Mahle Starter Motor 12V 10Th CW. Part number MS94 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number MS94, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by matching the part number MS94, OEM number 11131375, the 12V clockwise specification, and all listed mounting and pinion dimensions to the existing starter and application details before purchase.

FAQ

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number MS94 is the main reference point. Listed voltage is 12. Published fitment references include BELARUS 1222 JOHN DEERE ENG, BELL 700J, CLAAS ARES. These details should still be checked against the original unit before ordering.

What voltage is the Mahle MS94 starter motor?

It is a 12V starter motor. For this listing, part number MS94 is the main reference point. Listed voltage is 12. Published fitment references include BELARUS 1222 JOHN DEERE ENG, BELL 700J, CLAAS ARES. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 10 teeth. For this listing, part number MS94 is the main reference point. Listed voltage is 12. Published fitment references include BELARUS 1222 JOHN DEERE ENG, BELL 700J, CLAAS ARES. These details should still be checked against the original unit before ordering.

What is the rotation direction?

It is clockwise rotation, shown as CW. For this listing, part number MS94 is the main reference point. Listed voltage is 12. Published fitment references include BELARUS 1222 JOHN DEERE ENG, BELL 700J, CLAAS ARES. These details should still be checked against the original unit before ordering.

What mounting pattern does it use?

It uses a 3 hole starter mount, with mount centres A at 127mm and B/C at 90mm. For this listing, part number MS94 is the main reference point. Listed voltage is 12. Published fitment references include BELARUS 1222 JOHN DEERE ENG, BELL 700J, CLAAS ARES. These details should still be checked against the original unit before ordering.

What warranty is listed?

A one year warranty is listed. For this listing, part number MS94 is the main reference point. Listed voltage is 12. Published fitment references include BELARUS 1222 JOHN DEERE ENG, BELL 700J, CLAAS ARES. These details should still be checked against the original unit before ordering.