Genuine Products Starter Motor 12V 10 Tooth CW Part No. JR3Z11002A

The Genuine Products starter motor listed here is a 12V unit with 10 teeth, clockwise rotation, and part number JR3Z11002A. It is supplied as a new starter motor, sold each, and carries an OE product designation for buyers looking for a direct replacement style part.

Key physical details matter with starter motors, and this unit has a 76mm flange diameter, 118mm mount centres, a 2-hole starter mount type, and M10x1.5 / 11 mount hole diameter. The pinion sits at 19mm at rest, with a 32mm pinion diameter and an overall length of 197mm.

The unit is listed as suiting Denso applications and is identified in the fitment data against Ford Mustang, including Ford Mustang 2018. Because starter fitment is critical, part number JR3Z11002A and the listed dimensions should be checked carefully before ordering.

Key Features

• 12V starter motor
• 10 tooth pinion
• Clockwise rotation
• OE product
• New unit
• Sold each

Specifications

• Part No.: JR3Z11002A
• Brand: Genuine Products
• Type: Starter Motor
• Voltage: 12V
• Rotation: CW
• Number of teeth: 10
• Starter mount type: 2 hole
• Mount centres A: 118mm

Fitment information

• Ford Mustang
• Ford Mustang 2018

Application and Buying Notes

When comparing starter motors, the most important checks are voltage, rotation, tooth count, mounting pattern, and overall dimensions. This unit is 12V, clockwise rotation, 10 tooth, with 118mm mount centres and a 2-hole mount, so those details need to match the vehicle application before purchase.

The part number JR3Z11002A is the strongest reference point for confirmation, especially where multiple starter variants may exist. The unit is also listed for Denso applications, which is useful when matching by unit make as well as by physical layout.

The listed measurements provide practical verification points: 76mm flange diameter, 197mm overall length, 32mm pinion diameter, and 19mm pinion at rest. If the original starter differs in any of those areas, or if the mounting holes are not M10x1.5 / 11, it should be checked again before fitting.

This starter is sold as a new OE product and includes a one year warranty. Even so, correct application matching remains the buyer’s responsibility, particularly for vehicles where engine, build date, or electrical system differences can affect starter selection.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number JR3Z11002A helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 118mm, Number of Teeth 10, Pinion at Rest 19mm, Rotation CW, Voltage 12, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Product Group 2 STARTER MOTORS, Part No. JR3Z11002A, Brand GENUINE PRODUCTS, Description Genuine Starter Motor 12V 10Th CW, Flange Diameter 76mm, Mount Hole Diameter M10x1.5 / 11, Overall Length 197mm, Pinion Diameter 32mm, Suits Unit Make Denso, New / Reman. New.

Genuine Starter Motor 12V 10Th CW. Part number JR3Z11002A should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number JR3Z11002A, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include FORD MUSTANG, FORD MUSTANG 2018. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment by matching part number JR3Z11002A, the 12V clockwise 10 tooth specification, and the listed mounting and dimension details against the vehicle or removed sample part before ordering.

FAQ

What part number should I use to confirm this starter motor?

The part number is JR3Z11002A. That is the clearest reference for matching this starter motor to the correct application. For this listing, part number JR3Z11002A is the main reference point. Listed voltage is 12. Published fitment references include FORD MUSTANG, FORD MUSTANG 2018. These details should still be checked against the original unit before ordering.

Is this starter motor 12 volt?

Yes. The listed voltage is 12V. For this listing, part number JR3Z11002A is the main reference point. Listed voltage is 12. Published fitment references include FORD MUSTANG, FORD MUSTANG 2018. These details should still be checked against the original unit before ordering.

Does this starter motor rotate clockwise or counter-clockwise?

It is listed as clockwise rotation, shown as CW. For this listing, part number JR3Z11002A is the main reference point. Listed voltage is 12. Published fitment references include FORD MUSTANG, FORD MUSTANG 2018. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The starter motor has 10 teeth. For this listing, part number JR3Z11002A is the main reference point. Listed voltage is 12. Published fitment references include FORD MUSTANG, FORD MUSTANG 2018. These details should still be checked against the original unit before ordering.

What mounting details are listed for this starter motor?

The listed mounting details are a 2-hole starter mount type, 118mm mount centres A, and M10x1.5 / 11 mount hole diameter. For this listing, part number JR3Z11002A is the main reference point. Listed voltage is 12. Published fitment references include FORD MUSTANG, FORD MUSTANG 2018. These details should still be checked against the original unit before ordering.

What fitment information is provided?

The fitment data supplied lists Ford Mustang and Ford Mustang 2018. Final confirmation should still be made against part number JR3Z11002A and the physical specifications. For this listing, part number JR3Z11002A is the main reference point. Listed voltage is 12. Published fitment references include FORD MUSTANG, FORD MUSTANG 2018. These details should still be checked against the original unit before ordering.