OEX Starter Motor 12V 8 Tooth CW Mitsubishi Style MXS253

The OEX MXS253 is a new 12V starter motor in Mitsubishi style, specified with 8 teeth, clockwise rotation and a 1.7kW power rating. It uses a 2 hole starter mount, 105mm mount centres and a 66mm flange diameter, so the physical layout needs to match the vehicle application before purchase.

This unit is listed with an overall length of 216mm, a 28mm pinion diameter, 9mm mount hole diameter and 4mm pinion at rest. It weighs 3.32kg and is intended for dry clutch applications. Those dimensions are the practical checks that matter when comparing against the original starter.

OEX identifies this starter under part number MXS253 and notes that 8 tooth and 9 tooth units are interchangeable. That interchange note is useful, but the safest approach is still to confirm the part number, tooth count, mounting style and rotation against the vehicle’s original unit or application listing.

Key Features

• New 12V starter motor
• Clockwise rotation (CW)
• 8 tooth pinion
• 1.7kW power rating
• 2 hole starter mount
• Mitsubishi style unit

Specifications

• Brand: OEX
• Part No.: MXS253
• Product type: Starter motor
• Voltage: 12V
• Rotation: CW
• Power rating: 1.7kW
• Number of teeth: 8
• Starter mount type: 2 hole

Vehicle application guidance

• HOLDEN CRUZE
• HOLDEN DROVER
• SUZUKI APV
• SUZUKI BALENO
• SUZUKI CARRY
• SUZUKI GRAND VITARA
• SUZUKI GRAND VITARA (INC XL-7)
• SUZUKI JIMNY

Application and Buying Notes

Before ordering, check the original starter against MXS253 for the 12V electrical system, clockwise rotation, 8 tooth pinion and 2 hole mount. The listed 105mm mount centres, 66mm flange diameter and 216mm overall length are the main physical points that should line up with the vehicle’s existing starter arrangement.

The note that 8 tooth and 9 tooth units are interchangeable may help where the application allows either style, but it should not replace a direct comparison of the existing unit. Pinion diameter, pinion at rest measurement and mount hole size are all worth confirming if the old starter is available.

This starter is described as Mitsubishi style and intended for dry clutch use, so it is important to match the application rather than relying on appearance alone. If the vehicle has been modified, or if the original part has been changed previously, verify the part number, rotation and mounting pattern carefully before purchase.

OEX supplies this unit as a new starter motor, and the listed warranty is 3 years for passenger use or 1 year for commercial use. Warranty coverage should be read alongside the application details, because the correct fit still depends on matching the vehicle’s original starter specifications.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXS253 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 105mm, Number of Teeth 8, Pinion at Rest 4mm, Power Rating 1.7kW, Suits Unit Make Mitsubishi, Note 8 tooth and 9 tooth units interchangeable, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Weight 3.32kg, Product Group 1 ROTATING ELECTRICAL, Part No. MXS253, Brand OEX, Description OEX Starter Motor 12V 8Th CW Mitsubishi Style, Flange Diameter 66mm, Mount Hole Diameter 9, Overall Length 216mm, Pinion Diameter 28mm, Rotation CW.

OEX Starter Motor 12V 8Th CW Mitsubishi Style. Part number MXS253 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number MXS253, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include HOLDEN CRUZE, HOLDEN CRUZE 2002, HOLDEN CRUZE 2003, HOLDEN CRUZE 2004, SUZUKI APV, SUZUKI APV 2005. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment by matching part number MXS253, 12V CW rotation, 8 tooth pinion, 2 hole mount, 105mm mount centres and the vehicle application details before ordering.

FAQ

Is this starter motor new or reconditioned?

This OEX starter motor is listed as new. For this listing, part number MXS253 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CRUZE, HOLDEN CRUZE 2002, HOLDEN CRUZE 2003. These details should still be checked against the original unit before ordering.

What voltage is the MXS253 starter motor?

It is a 12V starter motor. For this listing, part number MXS253 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CRUZE, HOLDEN CRUZE 2002, HOLDEN CRUZE 2003. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion is listed with 8 teeth. For this listing, part number MXS253 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CRUZE, HOLDEN CRUZE 2002, HOLDEN CRUZE 2003. These details should still be checked against the original unit before ordering.

What is the rotation direction?

The starter is clockwise rotation, shown as CW. For this listing, part number MXS253 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CRUZE, HOLDEN CRUZE 2002, HOLDEN CRUZE 2003. These details should still be checked against the original unit before ordering.

What warranty is listed for this unit?

The listed warranty is 3 years for passenger use and 1 year for commercial use. For this listing, part number MXS253 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CRUZE, HOLDEN CRUZE 2002, HOLDEN CRUZE 2003. These details should still be checked against the original unit before ordering.

Are 8 tooth and 9 tooth units interchangeable?

Yes. The notes state that 8 tooth and 9 tooth units are interchangeable, but the part number, mounting details and application should still be confirmed. For this listing, part number MXS253 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN CRUZE, HOLDEN CRUZE 2002, HOLDEN CRUZE 2003. These details should still be checked against the original unit before ordering.