OEX Starter Motor 12V 9TH CW Bosch Style BXS0126

The OEX starter motor BXS0126 is a new 12V unit with clockwise rotation, a 9-tooth pinion and a 1.2kW power rating. It is listed as Bosch style, with a suit unit make of Bosch, and uses a 2-hole starter mount for applications that match the stated dimensions.

Key physical checks on this unit include a 105mm mount centres A measurement, 76mm flange diameter, 199mm overall length and M10x1.5 / 11 mount hole diameter. The pinion sits 25mm at rest and the pinion diameter is 29mm, so matching the old starter against these dimensions is important before ordering.

This starter is supplied as a new rotating electrical component and weighs 2.9kg. OEX describes it as a quality replacement starter motor for the Australian automotive aftermarket, and the unit carries part number BXS0126 for identification against the vehicle application or the removed part.

Key Features

• 12V starter motor
• 9-tooth pinion
• Clockwise rotation
• 1.2kW power rating
• Bosch style / suits Bosch unit make
• 2-hole starter mount

Specifications

• Voltage: 12V
• Power rating: 1.2kW
• Number of teeth: 9
• Rotation: CW
• Starter mount type: 2 hole
• Mount centres A: 105mm
• Flange diameter: 76mm
• Overall length: 199mm

Fitment guidance

• Verified fitment data is not supplied here in a form suitable for direct vehicle confirmation.
• Use the part number BXS0126, the Bosch style designation and the physical measurements to compare against the original starter before purchase.

Application and Buying Notes

When checking compatibility, the safest starting point is the part number BXS0126 together with the Bosch style identification. The unit is a 12V starter motor with clockwise rotation, 9 teeth, and a 1.2kW rating, so the replacement needs to match those electrical and mechanical details as well as the vehicle application.

Physical dimensions matter on starter motors just as much as the electrical specification. Confirm the 105mm mount centres A, 76mm flange diameter, 199mm overall length, 29mm pinion diameter and M10x1.5 / 11 mount hole diameter against the starter being removed from the vehicle. A mismatch in any of these points can prevent proper installation.

The note for this part states that a stud switch terminal requires BXS0197. If the vehicle uses that terminal arrangement, the terminal requirement needs to be checked before fitting this starter. The unit is new, weighs 2.9kg, and is supplied with a 3 year passenger or 1 year commercial warranty, so the intended use should also be matched to the warranty conditions.

For older or previously repaired vehicles, the best practice is to compare the original starter side by side with the replacement, including the tooth count, rotation direction, mounting style and pinion position at rest. That approach is especially useful when Bosch style units are being cross-checked against an existing starter with similar appearance but different dimensions.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number BXS0126 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 105mm, Number of Teeth 9, Pinion at Rest 25mm, Power Rating 1.2kW, Suits Unit Make Bosch, Note FOR STUD SWITCH TERMINAL USE BXS0197, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Weight 2.9kg, Product Group 1 ROTATING ELECTRICAL, Part No. BXS0126, Brand OEX, Description OEX Starter Motor 12V 9Th CW Bosch Style, Flange Diameter 76mm, Mount Hole Diameter M10x1.5 / 11, Overall Length 199mm, Pinion Diameter 29mm, Rotation CW.

OEX Starter Motor 12V 9Th CW Bosch Style. Part number BXS0126 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number BXS0126, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include BMW 1, BMW 1 2004, BMW 1 2005, BMW 1 2006, MAZDA TITAN, MAZDA TITAN 1984. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Please confirm fitment using part number BXS0126, Bosch style application details, and the listed measurements before ordering. If the vehicle uses a stud switch terminal, BXS0197 is required.

FAQ

What is the part number for this starter motor?

The part number is BXS0126. For this listing, part number BXS0126 is the main reference point. Listed voltage is 12. Published fitment references include BMW 1, BMW 1 2004, BMW 1 2005. These details should still be checked against the original unit before ordering.

Is this starter motor new or remanufactured?

It is listed as a new starter motor. For this listing, part number BXS0126 is the main reference point. Listed voltage is 12. Published fitment references include BMW 1, BMW 1 2004, BMW 1 2005. These details should still be checked against the original unit before ordering.

What voltage and rotation does it have?

It is a 12V starter motor with clockwise rotation. For this listing, part number BXS0126 is the main reference point. Listed voltage is 12. Published fitment references include BMW 1, BMW 1 2004, BMW 1 2005. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 9 teeth. For this listing, part number BXS0126 is the main reference point. Listed voltage is 12. Published fitment references include BMW 1, BMW 1 2004, BMW 1 2005. These details should still be checked against the original unit before ordering.

What are the main mounting measurements?

The listed mounting details are 105mm mount centres A, 76mm flange diameter, M10x1.5 / 11 mount hole diameter and a 2-hole starter mount. For this listing, part number BXS0126 is the main reference point. Listed voltage is 12. Published fitment references include BMW 1, BMW 1 2004, BMW 1 2005. These details should still be checked against the original unit before ordering.

Is there any special terminal note to check before fitting?

Yes. The note states that for stud switch terminal use, BXS0197 is required. For this listing, part number BXS0126 is the main reference point. Listed voltage is 12. Published fitment references include BMW 1, BMW 1 2004, BMW 1 2005. These details should still be checked against the original unit before ordering.