Auto Electrics Aust Starter Motor 12V 10T CW Denso Style ASND1250

The Auto Electrics Aust starter motor listed under part number ASND1250 is a 12V unit with 10 teeth, clockwise rotation, and a 2kW power rating. It is described as a Denso style starter and is supplied new, with a one year warranty.

Key dimensions provided for identification and comparison include a 113mm mount centres A measurement, 74mm flange diameter, 216mm overall length, and 216mm overall height. The starter uses a 2 hole mount, M10 mount hole diameter, and has a 32mm pinion diameter.

At rest, the pinion sits at 22mm and the unit is listed as a dry clutch type. Weight is recorded at 4.82kg. These measurements are useful when checking replacement suitability against the existing starter and mounting arrangement.

The listing also notes: see ASND295672G, which is the smaller version. That makes the ASND1250 a good candidate for buyers comparing size, mounting, and Denso-style specification details before ordering.

Key Features

• 12V starter motor
• 10 tooth pinion
• Clockwise rotation
• 2kW power rating
• Denso style unit
• New starter motor

Specifications

• Part number: ASND1250
• Brand: Auto Electrics Aust
• Type: Starter Motor
• Voltage: 12V
• Power rating: 2kW
• Rotation: CW
• Number of teeth: 10
• Suits unit make: Denso

Fitment guidance

• Toyota
• Toyota FJ Cruiser
• Toyota Hilux
• Toyota Land Cruiser Prado
• Toyota FJ Cruiser 2010
• Toyota Hilux 2005
• Toyota Hilux 2006
• Toyota Hilux 2007

Application and Buying Notes

Use the part number ASND1250 first, then compare the starter against the vehicle application and the physical measurements. The 12V specification, 10 tooth pinion, 2kW rating, and clockwise rotation all need to match the replacement unit being removed from the vehicle.

Mounting details matter just as much as electrical specification on a starter motor. Check the 2 hole mount, 113mm mount centres A, M10 mount hole diameter, 74mm flange diameter, and 216mm overall length against the existing starter before purchase.

If you are replacing a failed starter, compare the pinion at rest measurement of 22mm, the 32mm pinion diameter, and the dry clutch type to the removed unit. Those details can help avoid ordering a part that matches the broad description but not the exact installed configuration.

Because starter motors can vary within the same model line, it is best to verify the vehicle details, the original part number, and the physical dimensions before fitting. That is especially important when the vehicle is listed across multiple Toyota models and year ranges.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number ASND1250 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 113mm, Number of Teeth 10, Pinion at Rest 22mm, Power Rating 2kW, Suits Unit Make Denso, Note See ASND295672G (Smaller version), Starter Mount Type 2 Hole.

Additional published details for cross-checking include Overall Height 216mm, Product Group 1 ROTATING ELECTRICAL, Part No. ASND1250, Brand AUTO ELECTRICS AUST, Description Starter Motor 12V 10Th CW Denso Style, Flange Diameter 74mm, Mount Hole Diameter M10, Overall Length 216mm, Pinion Diameter 32mm, Rotation CW.

Starter Motor 12V 10Th CW Denso Style. Part number ASND1250 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number ASND1250, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include TOYOTA FJ CRUISER, TOYOTA FJ CRUISER 2010, TOYOTA HILUX, TOYOTA HILUX 2005. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm compatibility by matching part number ASND1250, the 12V 10 tooth clockwise Denso-style specification, and the mounting and dimensional details against the vehicle and the removed starter before ordering.

FAQ

What is the part number for this starter motor?

The part number listed is ASND1250. For this listing, part number ASND1250 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA FJ CRUISER, TOYOTA FJ CRUISER 2010, TOYOTA HILUX. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 12V starter motor. For this listing, part number ASND1250 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA FJ CRUISER, TOYOTA FJ CRUISER 2010, TOYOTA HILUX. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 10 teeth. For this listing, part number ASND1250 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA FJ CRUISER, TOYOTA FJ CRUISER 2010, TOYOTA HILUX. These details should still be checked against the original unit before ordering.

What is the rotation direction?

The starter is clockwise rotation, listed as CW. For this listing, part number ASND1250 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA FJ CRUISER, TOYOTA FJ CRUISER 2010, TOYOTA HILUX. These details should still be checked against the original unit before ordering.

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number ASND1250 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA FJ CRUISER, TOYOTA FJ CRUISER 2010, TOYOTA HILUX. These details should still be checked against the original unit before ordering.

Which vehicles are referenced for fitment?

The fitment references shown are Toyota, Toyota FJ Cruiser, Toyota Hilux, and Toyota Land Cruiser Prado, with sample year references including FJ Cruiser 2010 and Hilux 2005 through 2013. For this listing, part number ASND1250 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA FJ CRUISER, TOYOTA FJ CRUISER 2010, TOYOTA HILUX. These details should still be checked against the original unit before ordering.