OEX Air Conditioning Compressor 12V Direct Mount MHI MSC60CA Style CXM0005

The OEX Air Conditioning Compressor is a 12V direct mount unit in MHI MSC60CA style, supplied under part number CXM0005. It uses a pad fitting type, a 90mm clutch diameter, and a 5 groove pulley section, so matching the existing compressor style and mounting arrangement is important before purchase.

This unit is listed for Mitsubishi Colt RG 1.5L vehicles from 01/2004 to 12/2011. The supplied fitment detail is specific, so it should be checked against the vehicle build date, engine application, and the compressor already fitted to the vehicle.

The compressor is specified with PAG46 oil type, an oil capacity of 110ml, and a weight of 6.5kg. Those details matter when comparing units, especially where the replacement needs to match both the physical layout and the refrigerant system requirements already in the vehicle.

Key Features

• 12V air conditioning compressor
• Direct mount compressor design
• MHI MSC60CA style
• 5 groove pulley section
• 90mm clutch diameter
• Pad fitting type

Specifications

• Brand: OEX
• Part No.: CXM0005
• Product type: Air conditioning compressor
• Voltage: 12V
• Compressor mounting: Direct mount
• Series: MSC60CA
• Suits unit make: MHI
• Clutch diameter: 90mm

Verified fitment

• Mitsubishi Colt RG 1.5L
• 01/2004 - 12/2011

Application and Buying Notes

When comparing this compressor, start with the part number CXM0005, the MSC60CA series, and the direct mount, pad fitting arrangement. These are the most useful identifiers for checking whether the replacement matches the unit already on the vehicle.

The listed vehicle application is Mitsubishi Colt RG 1.5L from 01/2004 to 12/2011. That makes build date and engine application important, because the same model range can use different air conditioning components depending on variant and equipment level.

The compressor is specified with a 5 groove pulley section and a 90mm clutch diameter. Both of those measurements need to align with the original compressor setup, otherwise belt alignment and clutch fitment can become an issue.

A compressor replacement is best approached by confirming the old unit’s mounting style, pulley grooves, clutch size, and refrigerant oil requirements before fitting. Matching those details reduces the chance of ordering the wrong part and helps the installer compare like with like.

The compressor weighs 6.5kg and is supplied as a single each. If you are cross-checking against a removed unit, compare the physical size, mount style, and connection layout rather than relying only on the vehicle badge or model name.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXM0005 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty Two Years, Compressor Mounting Direct Mount, Pulley Section 5 Groove, Suits Unit Make MHI, Note Oil type PAG46, Dust Cover Y/N No, Product Group 2 AC COMPONENTS.

Additional published details for cross-checking include Part No. CXM0005, Brand OEX, Description OEX Air Conditioning Compressor 12V Direct Mount MHI MSC60CA Style, Clutch Diameter 90mm, Fitting Type Pad, Series MSC60CA, Voltage 12, Oil Capacity 110ml, Weight 6.5kg, Product Group 1 COOLING.

OEX Air Conditioning Compressor 12V Direct Mount MHI MSC60CA Style. Part number CXM0005 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is 5 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXM0005, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

Compatibility note: Please confirm compatibility by checking part number CXM0005, MSC60CA style, direct mount pad fitment, 12V specification, 5 groove pulley section, 90mm clutch diameter, and the Mitsubishi Colt RG 1.5L application from 01/2004 to 12/2011 before ordering.

FAQ

What vehicle is this compressor listed for?

It is listed for Mitsubishi Colt RG 1.5L vehicles from 01/2004 to 12/2011. For this listing, part number CXM0005 is the main reference point. Listed voltage is 12. Published fitment references include MITSUBISHI COLT, MITSUBISHI COLT 2004, MITSUBISHI COLT 2005. These details should still be checked against the original unit before ordering.

What is the part number?

The part number is CXM0005. For this listing, part number CXM0005 is the main reference point. Listed voltage is 12. Published fitment references include MITSUBISHI COLT, MITSUBISHI COLT 2004, MITSUBISHI COLT 2005. These details should still be checked against the original unit before ordering.

What voltage is this compressor?

It is a 12V compressor. For this listing, part number CXM0005 is the main reference point. Listed voltage is 12. Published fitment references include MITSUBISHI COLT, MITSUBISHI COLT 2004, MITSUBISHI COLT 2005. These details should still be checked against the original unit before ordering.

What type of mounting does it use?

It is a direct mount compressor with a pad fitting type. For this listing, part number CXM0005 is the main reference point. Listed voltage is 12. Published fitment references include MITSUBISHI COLT, MITSUBISHI COLT 2004, MITSUBISHI COLT 2005. These details should still be checked against the original unit before ordering.

What pulley and clutch details are listed?

The compressor is listed with a 5 groove pulley section and a 90mm clutch diameter. For this listing, part number CXM0005 is the main reference point. Listed voltage is 12. Published fitment references include MITSUBISHI COLT, MITSUBISHI COLT 2004, MITSUBISHI COLT 2005. These details should still be checked against the original unit before ordering.

What oil specification is listed?

The listed oil type is PAG46, with an oil capacity of 110ml. For this listing, part number CXM0005 is the main reference point. Listed voltage is 12. Published fitment references include MITSUBISHI COLT, MITSUBISHI COLT 2004, MITSUBISHI COLT 2005. These details should still be checked against the original unit before ordering.