OEX Air Conditioning Compressor 12V Direct Mount MHI MSC90CAS Style CXM0008

The OEX Air Conditioning Compressor is a 12V direct mount unit in MHI MSC90CAS style, supplied under part number CXM0008. It is listed r conditioning compressor with a 6 groove pulley, pad fitting type, and a 95mm clutch diameter, so matching the existing compressor style and mounting arrangement matters before purchase.

This compressor is specified with a 75ml oil capacity and uses PAG56 oil. The unit is noted as suits MHI applications, and the stated weight is 6.5kg. Those details are worth checking against the vehicle’s current compressor and service requirements, especially where the original compressor has been replaced before.

The published application details point to selected Mitsubishi models, including ASX XA 2.0L from 07/2010 to 08/2012, Lancer CJ (EVO) 2.0L from 01/2005 to 10/2016, and Outlander ZG to ZJ in 2.0L, 2.4L, and 3.0L petrol variants from 10/2006 to 03/2015. As with any AC compressor, the safest approach is to confirm the part number, mounting style, pulley configuration, and vehicle application before ordering.

Key Features

• 12V air conditioning compressor
• Direct mount design
• MHI MSC90CAS style
• Part number CXM0008
• 6 groove pulley
• Pad fitting type

Specifications

• Brand: OEX
• Product type: Air conditioning compressor
• Voltage: 12V
• Compressor mounting: Direct mount
• Series: MSC90CAS
• Suits unit make: MHI
• Pulley section: 6 groove
• Fitting type: Pad

Confirmed application details

• Mitsubishi ASX XA 2.0L — 07/2010 to 08/2012
• Mitsubishi Lancer CJ (EVO) 2.0L — 01/2005 to 10/2016
• Mitsubishi Outlander ZG - ZJ 2.0L, 2.4L and 3.0L — 10/2006 to 03/2015

Application and Buying Notes

Before ordering, compare the existing compressor against part number CXM0008, the MHI MSC90CAS style, and the direct mount arrangement. The pulley is 6 groove, the clutch diameter is 95mm, and the fitting type is pad, so a close physical match is important if the vehicle has had previous AC work or a non-original replacement fitted.

Application coverage is provided only for the Mitsubishi ASX XA 2.0L, Lancer CJ (EVO) 2.0L, and Outlander ZG - ZJ in the stated engine and date ranges. Model name alone is not enough; the year range, engine size, and compressor style all need to line up before you treat this as the correct part.

The unit is supplied as each and carries a two year warranty. That gives a clear purchasing reference, but it does not replace fitment checking. If you are comparing against a vehicle with a different compressor make, pulley layout, or mounting pattern, confirm the details carefully before installation.

Weight is listed at 6.5kg, which may be useful when comparing replacement units or checking freight handling. The absence of a dust cover is also noted, so make sure that is acceptable for your application and packaging requirements before finalising the order.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXM0008 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty Two Years, Compressor Mounting Direct Mount, Pulley Section 6 Groove, Suits Unit Make MHI, Note Oil type PAG56, Dust Cover Y/N No, Product Group 2 AC COMPONENTS.

Additional published details for cross-checking include Part No. CXM0008, Brand OEX, Description OEX Air Conditioning Compressor 12V Direct Mount MHI MSC90CAS Style, Clutch Diameter 95mm, Fitting Type Pad, Series MSC90CAS, Voltage 12, Oil Capacity 75ml, Weight 6.5kg, Product Group 1 COOLING.

OEX Air Conditioning Compressor 12V Direct Mount MHI MSC90CAS Style. Part number CXM0008 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXM0008, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Please confirm fitment using part number CXM0008, the MHI MSC90CAS style, the 12V direct mount layout, and the stated vehicle application details before purchase.

FAQ

What part number does this compressor use?

The listed part number is CXM0008. For this listing, part number CXM0008 is the main reference point. Listed voltage is 12. Published fitment references include MITSUBISHI ASX, MITSUBISHI ASX 2010, MITSUBISHI ASX 2011. These details should still be checked against the original unit before ordering.

What vehicles are stated as compatible?

The stated applications are Mitsubishi ASX XA 2.0L from 07/2010 to 08/2012, Mitsubishi Lancer CJ (EVO) 2.0L from 01/2005 to 10/2016, and Mitsubishi Outlander ZG - ZJ 2.0L, 2.4L and 3.0L from 10/2006 to 03/2015.

What is the voltage of this compressor?

It is a 12V compressor. For this listing, part number CXM0008 is the main reference point. Listed voltage is 12. Published fitment references include MITSUBISHI ASX, MITSUBISHI ASX 2010, MITSUBISHI ASX 2011. These details should still be checked against the original unit before ordering.

What oil type should be used with this unit?

The stated oil type is PAG56, with an oil capacity of 75ml. For this listing, part number CXM0008 is the main reference point. Listed voltage is 12. Published fitment references include MITSUBISHI ASX, MITSUBISHI ASX 2010, MITSUBISHI ASX 2011. These details should still be checked against the original unit before ordering.

What is the pulley and clutch information?

The compressor has a 6 groove pulley and a 95mm clutch diameter. For this listing, part number CXM0008 is the main reference point. Listed voltage is 12. Published fitment references include MITSUBISHI ASX, MITSUBISHI ASX 2010, MITSUBISHI ASX 2011. These details should still be checked against the original unit before ordering.

Is a warranty listed?

Yes. The listed warranty is two years. For this listing, part number CXM0008 is the main reference point. Listed voltage is 12. Published fitment references include MITSUBISHI ASX, MITSUBISHI ASX 2010, MITSUBISHI ASX 2011. These details should still be checked against the original unit before ordering.