OEX Air Conditioning Compressor 12V Direct Mount Denso 7SEU17A Style CXD0056

The OEX air conditioning compressor listed here is a 12V direct mount unit in Denso 7SEU17A style, with part number CXD0056 and original equipment number 64529216467. It is supplied as an each item and suits Denso applications where the pad fitting type, 6 groove pulley section, and 110mm clutch diameter are required.

This compressor is specified with an oil capacity of 140ml and the note calls for PAG46 oil. It weighs 6.2kg and does not include a dust cover. Those details matter when checking replacement parts, because compressor type, mounting style, pulley layout, and oil specification all need to line up with the vehicle's existing system.

A two year warranty is listed for this part. The product description identifies it as an OEX air conditioning compressor, 12V direct mount, Denso 7SEU17A style, which makes the identification straightforward when comparing against the vehicle’s removed compressor or the part number on the existing unit.

Key Features

• 12V air conditioning compressor
• Direct mount configuration
• Denso 7SEU17A style
• Part number CXD0056
• Original equipment number 64529216467
• 110mm clutch diameter

Specifications

• Voltage: 12V
• Oil capacity: 140ml
• Oil type: PAG46
• Weight: 6.2kg
• Compressor mounting: Direct Mount
• Clutch diameter: 110mm
• Pulley section: 6 Groove
• Fitting type: Pad

Verified fitment

• BMW X3 F25 3.0L turbo diesel from 03/2011 onwards

Application and Buying Notes

Before ordering, check the compressor that is being replaced against the identifiers on this listing: CXD0056, 64529216467, and Denso 7SEU17A style. Matching the part number and style is the safest starting point, especially on air conditioning components where the mounting arrangement, clutch size, and pulley section must suit the vehicle exactly.

The listed fitment is for BMW X3 F25 3.0L turbo diesel from 03/2011 onwards. That vehicle note is specific, so it should not be broadened to other X3 variants or engine types without confirming the application first. If the removed compressor has a different mount, pulley count, clutch diameter, or connector arrangement, stop and verify before fitting.

The oil specification is also important. This compressor notes PAG46 oil and an oil capacity of 140ml. Air conditioning compressors can be damaged by incorrect oil type or incorrect oil quantity, so the existing system should be checked and prepared properly during installation. A professional installer will normally compare the old unit, system requirements, and service procedure before fitting the replacement.

Because the unit is listed as a direct mount Denso style compressor with a pad fitting type and 6 groove pulley section, the physical configuration should be confirmed against the original part. The weight of 6.2kg and the absence of a dust cover are useful practical identifiers when matching the replacement to the old compressor and planning the job.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXD0056 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty Two Years, Compressor Mounting Direct Mount, Original Equipment Number 64529216467, Series 7SEU17A, Voltage 12, Oil Capacity 140ml, Weight 6.2kg, Product Group 1 COOLING.

Additional published details for cross-checking include Part No. CXD0056, Brand OEX, Description OEX Air Conditioning Compressor 12V Direct Mount Denso 7SEU17A Style, Clutch Diameter 110mm, Fitting Type Pad, Pulley Section 6 Groove, Suits Unit Make Denso, Note Oil type PAG46., Dust Cover Y/N No.

OEX Air Conditioning Compressor 12V Direct Mount Denso 7SEU17A Style. Part number CXD0056 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXD0056, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by checking CXD0056, 64529216467, Denso 7SEU17A style, and the BMW X3 F25 3.0L turbo diesel application from 03/2011 onwards before purchase.

FAQ

What is the part number for this compressor?

The part number listed is CXD0056. For this listing, part number CXD0056 is the main reference point. Listed voltage is 12. Published fitment references include BMW X3, BMW X3 2010, BMW X3 2011. These details should still be checked against the original unit before ordering.

What original equipment number is supplied?

The original equipment number listed is 64529216467. For this listing, part number CXD0056 is the main reference point. Listed voltage is 12. Published fitment references include BMW X3, BMW X3 2010, BMW X3 2011. These details should still be checked against the original unit before ordering.

What vehicle fitment is provided?

The verified fitment listed is BMW X3 F25 3.0L turbo diesel from 03/2011 onwards. For this listing, part number CXD0056 is the main reference point. Listed voltage is 12. Published fitment references include BMW X3, BMW X3 2010, BMW X3 2011. These details should still be checked against the original unit before ordering.

What oil does this compressor use?

The note specifies PAG46 oil, and the listed oil capacity is 140ml. For this listing, part number CXD0056 is the main reference point. Listed voltage is 12. Published fitment references include BMW X3, BMW X3 2010, BMW X3 2011. These details should still be checked against the original unit before ordering.

What type of mounting and pulley does it have?

It is listed as a direct mount compressor with a pad fitting type and a 6 groove pulley section. For this listing, part number CXD0056 is the main reference point. Listed voltage is 12. Published fitment references include BMW X3, BMW X3 2010, BMW X3 2011. These details should still be checked against the original unit before ordering.

Does this compressor come with a warranty?

Yes. A two year warranty is listed for this part. For this listing, part number CXD0056 is the main reference point. Listed voltage is 12. Published fitment references include BMW X3, BMW X3 2010, BMW X3 2011. These details should still be checked against the original unit before ordering.