OEX Air Conditioning Compressor 12V Direct Mount Denso 10PA17C Style CXD0053

The OEX air conditioning compressor is a 12V direct mount unit built in a Denso 10PA17C style, with part number CXD0053. It is listed with a pad fitting type, 137mm clutch diameter, and pulley section A, so it is important to match the compressor mounting and drive arrangement before ordering.

This compressor is specified with no access port, no dust cover, and an oil capacity of 130ml. It is designed for use with a Denso unit make and the note advises to use the original manifold, which is a key point when checking whether the existing hose and manifold setup can be transferred across.

A vehicle application is supplied for Toyota HiAce LH125R 2.8L from 08/1989 to 07/2000. That fitment detail should be checked carefully against the existing compressor, manifold, clutch, and mounting style on the vehicle, because the listed compressor is a direct mount pad type rather than a universal replacement.

Key Features

• OEX air conditioning compressor
• 12V direct mount design
• Denso 10PA17C style
• Pad fitting type
• 137mm clutch diameter
• Pulley section A

Specifications

• Part number: CXD0053
• Brand: OEX
• Unit of measure: Each
• Compressor type: Air conditioning compressor
• Voltage: 12V
• Series: 10PA17C
• Suits unit make: Denso
• Compressor mounting: Direct mount

Verified fitment details

• Toyota HiAce LH125R 2.8L
• 08/1989 - 07/2000

Application and Buying Notes

Before buying, confirm the compressor on your vehicle matches the Denso 10PA17C style, direct mount layout, and pad fitting type. The supplied fitment points to Toyota HiAce LH125R 2.8L from 08/1989 to 07/2000, but the safest check is still the part number CXD0053 against the existing unit and the original mounting arrangement.

The note to use the original manifold is important because the compressor is supplied without an access port and without a dust cover. If the manifold on the vehicle is not retained or does not suit the existing hose arrangement, the compressor may not be a straight swap even where the vehicle model matches.

The clutch diameter is 137mm and the pulley section is A, so belt alignment and clutch size should be checked against the old compressor before fitting. The listed oil capacity is 130ml, and the unit weighs 7.4kg, which are useful reference points when comparing against the removed part and planning installation.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXD0053 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty Two Years, Clutch Diameter 137mm, Fitting Type Pad, Series 10PA17C, Voltage 12, Oil Capacity 130ml, Weight 7.4kg, Product Group 1 COOLING.

Additional published details for cross-checking include Part No. CXD0053, Brand OEX, Description OEX Air Conditioning Compressor 12V Direct Mount Denso 10PA17C Style, Access Port No, Compressor Mounting Direct Mount, Pulley Section A, Suits Unit Make Denso, Note Use Original Manifold, Dust Cover Y/N No.

OEX Air Conditioning Compressor 12V Direct Mount Denso 10PA17C Style. Part number CXD0053 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is A. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXD0053, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include TOYOTA HIACE, TOYOTA HIACE 1989, TOYOTA HIACE 1990, TOYOTA HIACE 1991. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment by matching part number CXD0053, the Denso 10PA17C style, direct mount pad fitting, 137mm clutch diameter, and the original manifold arrangement before ordering.

FAQ

What vehicle application is listed for this compressor?

The listed application is Toyota HiAce LH125R 2.8L from 08/1989 to 07/2000. For this listing, part number CXD0053 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA HIACE, TOYOTA HIACE 1989, TOYOTA HIACE 1990. These details should still be checked against the original unit before ordering.

What is the part number?

The part number is CXD0053. For this listing, part number CXD0053 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA HIACE, TOYOTA HIACE 1989, TOYOTA HIACE 1990. These details should still be checked against the original unit before ordering.

What is the voltage?

It is a 12V compressor. For this listing, part number CXD0053 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA HIACE, TOYOTA HIACE 1989, TOYOTA HIACE 1990. These details should still be checked against the original unit before ordering.

What type of mounting does it use?

It is listed as a direct mount compressor with a pad fitting type. For this listing, part number CXD0053 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA HIACE, TOYOTA HIACE 1989, TOYOTA HIACE 1990. These details should still be checked against the original unit before ordering.

Does it use a Denso-style application?

Yes. It is described as a Denso 10PA17C style compressor and suits unit make Denso. For this listing, part number CXD0053 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA HIACE, TOYOTA HIACE 1989, TOYOTA HIACE 1990. These details should still be checked against the original unit before ordering.

What should be checked before ordering?

Check the part number CXD0053, the direct mount pad fitting, the 137mm clutch diameter, the A pulley section, and the use of the original manifold against the vehicle's existing compressor setup. For this listing, part number CXD0053 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA HIACE, TOYOTA HIACE 1989, TOYOTA HIACE 1990. These details should still be checked against the original unit before ordering.