Mahle Alternator 12V 33A MG195 New Dust Proof Internal Regulator

The Mahle alternator listed here is a 12V, 33A unit with part number MG195 and pin code IR200. It is supplied new, uses an internal regulator, and is described as dust proof, which makes the core identifiers easy to check before ordering.

This alternator is a single-leg mount design with a 56mm mount leg thickness, 56.0mm mounting bore distance, and 86.0mm mounting points diameter. The shaft diameter is 17mm, the pivot hole diameter is 10, and the adjusting hole diameter is 8, so the mounting arrangement should be matched carefully to the existing unit.

It is supplied without a belt pulley and has clockwise rotation. The unit is listed as insulated return: No, with a power rating and charge current of 33A, so the electrical and mounting details should both be confirmed against the vehicle or machine application before purchase.

Key Features

• 12V alternator with 33A output
• Mahle brand, new unit
• Part number MG195
• Internal regulator
• Clockwise rotation
• Without belt pulley

Specifications

• Voltage: 12V
• Power rating / alternator charge current: 33A
• Part number: MG195
• Pin code: IR200
• Regulator type: Internal
• Rotation: CW
• Mount leg thickness: 56mm
• Mounting bores distance: 56.0mm

Known applications

• CASE 433
• CASE 533/A
• CASE 540
• CASE 833A
• CASE IH 395
• CASE IH E833A
• CASE IH V433
• CASE IH V533

Application and Buying Notes

Before ordering, check the existing alternator against the key identifiers on this unit: MG195, IR200, 12V, 33A, CW rotation, and internal regulator. Those details matter because a 12V 33A alternator with a single-leg mount and no belt pulley needs the right physical arrangement as well as the right electrical setup.

The mounting dimensions are important on this part. The listed mount leg thickness is 56mm, the mount centre-to-centre measurement is 144mm, the mounting bores distance is 56.0mm, and the mounting points diameter is 86.0mm. If any of those figures differ from the replacement unit already on the machine, the part should not be assumed to suit.

The application list includes CASE, CASE IH, LOMBARDINI, and VM MOTORI models, with several dated variants shown, including CASE 433, CASE 533/A, LOMBARDINI 5LD675.2, and VM MOTORI HR192A. Even where a model name appears in the list, the safest check is to confirm the part number MG195 and compare the mounting measurements, shaft diameter of 17mm, and hole sizes before buying.

This alternator is described as new and dust proof, with a one year warranty. That gives a clear purchasing reference, but it does not replace a fitment check. If the existing alternator uses a different pulley arrangement, different rotation, or different mount geometry, the unit should be matched by measurement rather than by description alone.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MG195 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Mount Leg Thickness 56mm, Pivot Hole Diameter 10, Pulley Section Not Applicable, Rotation CW, Suits Unit Make Mahle, Note Dust proof, Mount Cnt to Cnt 144mm.

Additional published details for cross-checking include Insulated Return No, Pulleys without belt pulley, Mounting Bores Distance 56.0, Mounting points diameter 86.0, Packaging width 17.60, Net Weight 3208, Product Group 2 ALTERNATORS, Part No. MG195, Brand MAHLE.

Mahle Alternator 12V 33A. Part number MG195 should be checked first. Listed voltage is 12. Listed output rating is 33. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Single Leg. Regulator type is Internal. Pulley configuration is Not Applicable. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MG195, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 33 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include CASE 433, CASE 433 1986, CASE 533/A, CASE 533/A 1986, LOMBARDINI 5LD675.2, LOMBARDINI 5LD675.2 1969. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm fitment by comparing the part number MG195, pin code IR200, voltage, amperage, rotation, pulley arrangement, and all mounting measurements against the existing alternator and the application details for your machine.

FAQ

What is the part number for this alternator?

The listed part number is MG195. The pin code is IR200.

What are the electrical specifications?

It is a 12V alternator with a 33A power rating and 33A alternator charge current. The regulator type is internal.

Does this alternator come with a pulley?

No. It is listed as without belt pulley.

What type of mount does it use?

It is a single-leg alternator mount with a 56mm mount leg thickness, 56.0mm mounting bores distance, and 86.0mm mounting points diameter.

Which way does it rotate?

The rotation is clockwise, shown as CW.

What should I check before ordering?

Check MG195, IR200, 12V, 33A, CW rotation, internal regulator, shaft diameter of 17mm, and the mounting measurements. Also confirm that the vehicle or machine application matches the listed CASE, CASE IH, LOMBARDINI, or VM MOTORI references.