Mahle Alternator 12V 175A MG267

The MAHLE alternator listed here is a 12V, 175A unit under part number MG267. It is a new alternator, supplied each, with an internal regulator and a twin leg mount arrangement, which are the key details to check against the vehicle or machine being serviced.

Mounting dimensions matter with alternators, and this unit includes 101mm inside mounting legs, a 198mm mount centre-to-centre measurement, and 99.0mm mounting points diameter. The pulley is a 8 groove V-ribbed belt type with a 62mm outside diameter, so the existing drive setup needs to match before ordering.

This alternator is noted as dust proof and fitted with a trash screen. It is also described as meeting international electromagnetic compatibility standards and being manufactured using environmentally friendly technologies and materials. Those details are useful when replacing a charging system component in a work vehicle or machine that needs a straightforward like-for-like replacement.

If you are comparing alternatives, the most important identifiers here are MAHLE, MG267, 12V, 175A, twin leg mount, internal regulator, and the 8 groove pulley configuration. Those are the points that should line up with the original unit or the machine application.

Key Features

• 12V alternator with 175A charge current
• MAHLE part number MG267
• New unit, supplied each
• Internal regulator type
• Twin leg mount design
• 8 groove V-ribbed belt pulley

Specifications

• Type: Alternator
• Brand: MAHLE
• Voltage: 12V
• Power rating: 175A
• Alternator charge current: 175A
• Part No.: MG267
• Regulator type: Internal
• Alternator mount: Twin leg

Verified fitment applications

• CASE IH 6140
• CASE IH 7140
• CASE IH 7230
• CASE IH 7240
• CASE IH A8800
• CASE IH MAGNUM
• CASE IH PATRIOT
• CASE IH STEIGER

Application and Buying Notes

Before ordering, compare the MG267 part number, 12V system voltage, 175A output, and the twin leg mount with the alternator already fitted to the machine. The pulley setup also needs attention: this unit uses an 8 groove V-ribbed belt pulley with a 62mm outside diameter, so the belt and pulley profile should match the existing installation.

The listed mounting measurements are important for a proper physical fit. Check the 101mm inside mounting legs, 198mm mount centre-to-centre dimension, 101.0mm mounting bores distance, 99.0mm mounting points diameter, and the 30.0mm distance from pulley to alternator. Even small differences here can affect alignment and installation.

This alternator is fitted with an internal regulator, so it is suited to applications that use that style of control. If the machine uses an external regulator or a different charging arrangement, confirm the setup carefully before purchase. The adjusting hole diameter is 1/2 UNC and the pivot hole diameter is 13, which are also useful comparison points when checking the original unit.

The fitment list includes several CASE IH, CATERPILLAR AGRICULTURAL, FORD, and JOHN DEERE applications, but the safest approach is to match the part number and physical specifications first. Use the application list as a guide, then confirm the exact mounting and electrical details on the vehicle or machine being serviced.

The dust proof note and fitted trash screen are practical features for equipment exposed to dirt and debris, but they do not replace the need to verify the charging system layout. A correct alternator selection still depends on voltage, output, pulley type, regulator type, and the mounting dimensions being consistent with the original unit.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MG267 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Inside Mounting Legs 101mm, Power Rating (Amp) 175, Pulley Section 8 Groove, Suits Unit Make Mahle, Note Dust proof, Fitted with trash screen, Mount Cnt to Cnt 198mm, Alternator Charge Current [A] 175.

Additional published details for cross-checking include Mounting Bores Distance 101.0, Number of belts 8, Packaging length 30.5, Packaging height 20.50, Product Group 2 ALTERNATORS, Part No. MG267, Brand MAHLE, Description Mahle Alternator 12V 175A, Adjusting Hole Diameter 1/2 UNC.

Mahle Alternator 12V 175A. Part number MG267 should be checked first. Listed voltage is 12. Listed output rating is 175. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is 8 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MG267, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 175 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include CASE IH 6140, CASE IH 6140 2014, CASE IH 7140, CASE IH 7140 2014, CATERPILLAR AGRICULTURAL CHALLENGER 35, CATERPILLAR AGRICULTURAL CHALLENGER 35 1994. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm compatibility by matching part number MG267, 12V voltage, 175A output, twin leg mounting, internal regulator, and the 8 groove pulley arrangement against the original alternator and machine application details before purchase.

FAQ

What is the part number for this alternator?

The part number listed is MG267.

What voltage and output does this alternator have?

It is a 12V alternator with a 175A charge current and power rating.

Does this alternator use an internal regulator?

Yes, the regulator type is internal.

What pulley setup does it use?

It uses an 8 groove V-ribbed belt pulley with a 62mm outside diameter.

Is this a new or remanufactured unit?

This alternator is listed as new.

What warranty is supplied?

The warranty listed is one year.