Mahle Alternator 24V 50A MG600, Internal Regulator, Twin Leg Mount

The MAHLE MG600 is a new 24V alternator with a 50A power rating, supplied with a belt pulley and an internal regulator. It is listed as a twin leg mount unit, with an inside mounting leg measurement of 63mm, a mounting points diameter of 85.0, and a mount centre to centre measurement of 167mm.

This alternator is identified with Part No. MG600 and Pin Code IR200. Key dimensions supplied include a 12mm pivot hole diameter, an 11mm adjusting hole diameter, a pulley outside diameter of 81mm, and a distance from pulley to alternator of 47.5mm. It is a CCW rotation unit with a single belt and A-section pulley.

The unit is marked as suitable for Mahle application and is sold as each. It is a 24V, 50A alternator with a one year warranty, so it is important to check the mounting style, pulley arrangement, and electrical requirements against the vehicle or machine before ordering.

The listed fitment references include Lombardini 15LD and Lombardini Ecowind applications. Those references should be used as guidance only, and the final check should always be made against the part number, mounting dimensions, and regulator type before purchase.

Key Features

• 24V alternator with 50A output
• New unit supplied with belt pulley
• Internal regulator type
• Twin leg alternator mount
• CCW rotation
• One year warranty

Specifications

• Brand: MAHLE
• Product type: Alternator
• Voltage: 24V
• Power rating: 50A
• Alternator charge current: 50A
• Regulator type: Internal
• Rotation: CCW
• Pulley outside diameter: 81mm

Fitment references provided

• Lombardini 15LD
• Lombardini 15LD 2007
• Lombardini Ecowind
• Lombardini Ecowind 2007

Application and Buying Notes

Before ordering, confirm the existing alternator matches the key identifiers for this unit: 24V voltage, 50A output, internal regulator, CCW rotation, and Part No. MG600. These details matter because a correct-looking alternator can still be unsuitable if the electrical setup, rotation direction, or regulator arrangement differs.

Mounting dimensions are just as important as the electrical specification. This alternator is a twin leg mount unit with 63mm inside mounting legs, 85.0 mounting points diameter, 167mm centre to centre, a 12mm pivot hole, and an 11mm adjusting hole. If those measurements do not line up with the existing bracket and adjuster setup, the part is unlikely to install correctly.

The pulley setup also needs to be checked carefully. This unit has an 81mm pulley outside diameter, an A-section pulley, and a single belt arrangement. If the application uses a different belt profile, pulley size, or multi-belt drive, compatibility should be verified before purchase.

The fitment references supplied point to Lombardini 15LD and Lombardini Ecowind applications, including 2007 references. Those references are helpful, but they should be matched to the exact engine or equipment details and compared with the physical measurements listed here. A close match on model name alone is not enough for a reliable order decision.

For buyers replacing an existing unit, the safest approach is to compare the old alternator’s label, mounting ears, pulley style, and charge output against the MG600 listing. This is especially important on equipment where alternator variants can differ by year, application, or mounting arrangement.

If you are unsure, have the part number, engine model, and measurements checked by a qualified parts interpreter before fitting. That is the best way to avoid a mismatch and to make sure the alternator suits the vehicle or machine as installed.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MG600 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Inside Mounting Legs 63mm, Pivot Hole Diameter 12, Pulley Outside Diameter 81mm, Regulator Type Internal, Suits Unit Make Mahle, Alternator Mount Twin Leg, New / Reman. New.

Additional published details for cross-checking include Pulleys with belt pulley, Mounting points diameter 85.0, Distance from pulley to the alternator 47.5, Packaging width 18.60, Net Weight 4570, Product Group 2 ALTERNATORS, Part No. MG600, Brand MAHLE, Description Mahle Alternator 24V 50A.

Mahle Alternator 24V 50A. Part number MG600 should be checked first. Listed voltage is 24. Listed output rating is 50. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is A. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MG600, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

Compatibility note: Confirm fitment by matching Part No. MG600, the supplied mounting dimensions, pulley details, voltage, output, and application references before ordering.

FAQ

What is the voltage and output of this alternator?

It is a 24V alternator with a 50A power rating and 50A charge current.

Does this alternator have an internal regulator?

Yes. The listed regulator type is internal.

What mounting style does it use?

It is listed as a twin leg mount alternator with 63mm inside mounting legs, a 12mm pivot hole, and an 11mm adjusting hole.

What pulley details are supplied?

The alternator comes with a belt pulley, has an 81mm pulley outside diameter, uses an A-section pulley, and is listed with one belt.

What fitment references are provided?

The supplied fitment references include Lombardini 15LD and Lombardini Ecowind, including 2007 references.

What should I confirm before buying?

Check the part number MG600, 24V voltage, 50A output, CCW rotation, internal regulator, pulley style, and all mounting measurements against the existing unit.