Mahle Alternator 12V 55A MG67

The MAHLE Alternator MG67 is a new 12V, 55A unit with an internal regulator and a twin leg mount arrangement. It is listed with clockwise rotation, a 17mm shaft diameter, and no belt pulley fitted, so the mounting and drive setup need to be checked carefully before ordering.

Key identification points include Part No. MG67, Pin Code IR165, a mount centre to centre of 156mm, mounting points diameter of 78, and inside mounting legs of 67mm. The alternator uses connector / clamp W, with an M8x1.25 adjusting hole diameter and an 8mm pivot hole diameter.

This alternator is described as a MAHLE unit and is supplied new, not remanufactured. It carries a one year warranty and a power rating of 55 amps, which makes the electrical output and physical fit the main checkpoints for matching it to the application already in service.

Key Features

• New MAHLE alternator
• 12V, 55A output
• Internal regulator
• Twin leg mount
• Clockwise rotation
• Without belt pulley

Specifications

• Brand: MAHLE
• Part No.: MG67
• Description: Mahle Alternator 12V 55A
• Voltage: 12V
• Power rating: 55A
• Alternator charge current: 55A
• Alternator type: Multi-function
• New / Reman.: New

Fitment details supplied

• DEUTZ
• DEUTZ D2008L3
• DEUTZ D2008L4
• DEUTZ D2009L03
• JCB
• JCB 403
• JCB 406

Application and Buying Notes

Before ordering, confirm the physical mounting dimensions against the existing alternator. This unit is specified with a twin leg mount, inside mounting legs of 67mm, mounting bores distance of 67mm, mount centre to centre of 156mm, and mounting points diameter of 78. Those figures need to match the vehicle or equipment installation, not just the electrical rating.

Check the drive side as well. The alternator is listed as clockwise rotation, without a belt pulley, with a 17mm shaft diameter and pulley section marked not applicable. If the existing unit uses a different rotation, pulley setup, or shaft arrangement, this alternator should not be assumed to suit.

Electrical matching matters just as much as the mounting pattern. The unit is 12V with a 55A power rating, internal regulator, and connector / clamp W. If the current alternator uses a different voltage, output, regulator style, or plug type, compare all of those details before purchase.

The part number MG67 and pin code IR165 are important cross-checks when comparing units. If your original alternator or parts record shows a different number, treat that as a sign to verify the application carefully rather than relying on the general model name alone.

This alternator is supplied new and carries a one year warranty. Even so, it still needs to be matched to the exact application by mount, rotation, connector type, shaft size, and output rating. A close visual match is not enough when the bolt pattern or electrical connection differs.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MG67 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Inside Mounting Legs 67mm, Pivot Hole Diameter 8, Pulley Section Not Applicable, Rotation CW, Suits Unit Make Mahle, Alternator Mount Twin Leg, New / Reman. New.

Additional published details for cross-checking include Pulleys without belt pulley, Alternator Type Multi-function, Mounting points diameter 78, Packaging width 17.60, Net Weight 3800, Product Group 2 ALTERNATORS, Part No. MG67, Brand MAHLE, Description Mahle Alternator 12V 55A.

Mahle Alternator 12V 55A. Part number MG67 should be checked first. Listed voltage is 12. Listed output rating is 55. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is Not Applicable. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MG67, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 55 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include DEUTZ D2008L3, DEUTZ D2008L3 1980, DEUTZ D2008L4, DEUTZ D2008L4 1980, JCB 403, JCB 403 2008. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Please confirm fitment against Part No. MG67, pin code IR165, the listed mounting dimensions, rotation, connector type, and 12V 55A output before ordering. Where the existing alternator differs in any of those details, treat it as a non-match until verified.

FAQ

What voltage and output does this alternator have?

It is a 12V alternator with a 55A power rating and a listed alternator charge current of 55A.

Is this a new or remanufactured unit?

It is listed as new, not remanufactured.

What regulator type does it use?

This alternator has an internal regulator.

Does it come with a pulley?

No. It is listed as without belt pulley.

What mounting details should I check before buying?

Check the twin leg mount setup, inside mounting legs of 67mm, mounting bores distance of 67mm, mount centre to centre of 156mm, and mounting points diameter of 78.

Which vehicles or equipment are listed in the fitment details?

The supplied fitment details list DEUTZ, DEUTZ D2008L3, DEUTZ D2008L4, DEUTZ D2009L03, JCB, JCB 403, and JCB 406. Confirm the exact application and all matching details before ordering.