Nikko Alternator 24V 60A New Brushless Internal Regulator NXA9712

This Nikko alternator is a new 24V, 60A unit with internal regulation and a brushless design. The listed part number is NXA9712, and the alternator is supplied as each, with a one year warranty noted for the part.

Key mounting and physical details are listed clearly: twin leg alternator mount, 69mm inside mounting legs, 225mm mount centre to centre, 14mm pivot hole diameter, 12mm adjusting hole diameter, 83mm pulley outside diameter, and a 22mm shaft dimension. These measurements matter when matching the unit to the vehicle or machine already fitted.

The part is identified as a Nikko alternator, new rather than remanufactured, with a 60 amp power rating and BB pulley section. At 12.82kg, it is a substantial rotating electrical component, so confirming the existing alternator’s mounting style and dimensions before ordering is important.

Key Features

• 24V alternator with 60A output
• New unit, not remanufactured
• Internal regulator
• Brushless design
• Twin leg alternator mount
• Nikko part number NXA9712

Specifications

• Brand: Nikko
• Part No.: NXA9712
• Voltage: 24V
• Power rating: 60A
• Regulator type: Internal
• Condition: New
• Weight: 12.82kg
• Inside mounting legs: 69mm

Verified fitment details

• To suit Isuzu F Series with 6SD1T engine.

Application and Buying Notes

Before buying, compare the part number NXA9712 and the listed fitment note for Isuzu F Series with 6SD1T engine against the alternator already fitted to the vehicle. Matching the mount type, 69mm inside mounting legs, 225mm mount centre to centre, and the 14mm pivot hole and 12mm adjusting hole is just as important as matching voltage.

This alternator is a 24V, 60A unit, so it should only be used where the charging system is designed for that specification. The internal regulator and brushless construction are relevant identifiers when comparing it with the replacement unit removed from the vehicle or machine.

Check the pulley details carefully as well. The listed pulley outside diameter is 83mm and the pulley section is BB, which must suit the existing belt arrangement. The 22mm shaft dimension and twin leg mount are also useful checks if you are replacing a worn or damaged alternator rather than diagnosing it from the vehicle model alone.

The weight is listed at 12.82kg, which gives a practical sense of the unit’s size and construction. If the existing alternator has been altered, rebuilt, or fitted with a different pulley or bracket arrangement in the past, rely on the measurements and part number rather than model assumption.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number NXA9712 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Inside Mounting Legs 69mm, Pivot Hole Diameter 14, Pulley Outside Diameter 83mm, Regulator Type Internal, Voltage 24, Alternator Mount Twin Leg, New / Reman. New.

Additional published details for cross-checking include Weight 12.82kg, Product Group 1 ROTATING ELECTRICAL, Part No. NXA9712, Brand NIKKO, Description Nikko Alternator 24V 60A, Adjusting Hole Diameter 12, Pin Code IR37, Power Rating (Amp) 60, Pulley Section BB, Suits Unit Make Nikko.

Nikko Alternator 24V 60A. Part number NXA9712 should be checked first. Listed voltage is 24. Listed output rating is 60. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is BB. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number NXA9712, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 and output 60 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility using part number NXA9712, the 24V 60A specification, and the listed mounting and pulley measurements before ordering. Fitment is only explicitly noted for Isuzu F Series with 6SD1T engine.

FAQ

What is the part number for this alternator?

The listed part number is NXA9712. For this listing, part number NXA9712 is the main reference point. Listed voltage is 24. Listed output rating is 60. Published fitment references include CASE CX700B, CASE CX700B 2008, CASE CX800. These details should still be checked against the original unit before ordering.

Is this alternator new or remanufactured?

It is listed as new, not remanufactured. For this listing, part number NXA9712 is the main reference point. Listed voltage is 24. Listed output rating is 60. Published fitment references include CASE CX700B, CASE CX700B 2008, CASE CX800. These details should still be checked against the original unit before ordering.

What voltage and output does it have?

It is a 24V alternator with a 60A power rating. For this listing, part number NXA9712 is the main reference point. Listed voltage is 24. Listed output rating is 60. Published fitment references include CASE CX700B, CASE CX700B 2008, CASE CX800. These details should still be checked against the original unit before ordering.

Does it have an internal regulator?

Yes. The regulator type is listed as internal. For this listing, part number NXA9712 is the main reference point. Listed voltage is 24. Listed output rating is 60. Published fitment references include CASE CX700B, CASE CX700B 2008, CASE CX800. These details should still be checked against the original unit before ordering.

What fitment is explicitly listed?

It is listed to suit Isuzu F Series with 6SD1T engine. For this listing, part number NXA9712 is the main reference point. Listed voltage is 24. Listed output rating is 60. Published fitment references include CASE CX700B, CASE CX700B 2008, CASE CX800. These details should still be checked against the original unit before ordering.

What mounting and pulley details should be checked before ordering?

Check the twin leg mount, 69mm inside mounting legs, 225mm mount centre to centre, 14mm pivot hole diameter, 12mm adjusting hole diameter, 83mm pulley outside diameter, 22mm shaft dimension, and BB pulley section. For this listing, part number NXA9712 is the main reference point. Listed voltage is 24. Listed output rating is 60. Published fitment references include CASE CX700B, CASE CX700B 2008, CASE CX800. These details should still be checked against the original unit before ordering.