Denso Starter Motor 12V 10 Tooth CW DXS642

This Denso starter motor is a new 12V unit with clockwise rotation, 10 teeth, and part number DXS642. It is listed as an oil sealed starter motor with a 2.0kW power rating, a 2 hole starter mount, and a one year warranty.

Key measurements are important when matching a starter motor, and this unit has 127mm mount centres, an 89mm flange diameter, 11mm mount hole diameter, a 248mm overall length, a 40mm pinion diameter, and a 47mm pinion at rest. It weighs 4.9kg and is described as suitable for wet or dry clutch applications.

The starter is identified for Denso unit applications and is supplied as a new rotating electrical component. It uses premium copper terminals and high-voltage tested armature and field coils, which are relevant construction details when comparing replacement starters by part number and physical dimensions.

Key Features

• New Denso starter motor
• 12V, clockwise rotation
• 10 tooth pinion
• 2.0kW power rating
• Oil sealed design
• 2 hole starter mount

Specifications

• Part number: DXS642
• Brand: Denso
• Type: Starter motor
• Voltage: 12V
• Rotation: CW
• Number of teeth: 10
• Power rating: 2.0kW
• Starter mount type: 2 hole

Known application guidance

• BOBCAT 463
• BOBCAT 553
• BOBCAT MT55
• BOBCAT S70

Application and Buying Notes

Starter motors need to match more than just voltage, so check the DXS642 part number, 12V electrical system, 10 tooth pinion, and clockwise rotation before ordering. The mounting pattern is also critical here, with a 2 hole mount, 127mm mount centres, and an 11mm mount hole diameter listed for this unit.

Physical size matters as much as the electrical specification. This starter is 248mm overall length, with an 89mm flange diameter and 40mm pinion diameter, so it should be compared carefully against the removed unit and the space available around the bellhousing or mounting area.

The 2.0kW rating gives a useful reference point for the starter’s output, but it should not be used on its own as a fitment check. The safest approach is to confirm the listed measurements, rotation direction, tooth count, and the application details for the machine or engine you are replacing.

If you are replacing a Denso starter on a Bobcat machine, verify the exact model and build details before purchase. The application list supplied for this unit includes Bobcat 463, Bobcat 553, Bobcat MT55, and Bobcat S70, but the most reliable check remains the part number and the original starter’s dimensions.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS642 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 127mm, Number of Teeth 10, Pinion at Rest 47mm, Power Rating 2.0kW, Suits Unit Make Denso, Note Oil Sealed, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Weight 4.9kg, Product Group 1 ROTATING ELECTRICAL, Part No. DXS642, Brand DENSO, Description Denso Starter Motor 12V 10Th CW, Flange Diameter 89mm, Mount Hole Diameter 11, Overall Length 248mm, Pinion Diameter 40mm, Rotation CW.

Denso Starter Motor 12V 10Th CW. Part number DXS642 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS642, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include BOBCAT 463, BOBCAT 463 2008, BOBCAT 463 2009, BOBCAT 553. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment by matching part number DXS642, 12V specification, 10 tooth CW rotation, and the listed mounting and dimensional details against the unit being replaced. If there is any difference in the mounting pattern, pinion dimensions, or application details, compare the original starter before ordering.

FAQ

What is the part number for this starter motor?

The part number listed is DXS642. For this listing, part number DXS642 is the main reference point. Listed voltage is 12. Published fitment references include BOBCAT 463, BOBCAT 463 2008, BOBCAT 463 2009. These details should still be checked against the original unit before ordering.

Is this a 12V or 24V starter?

This starter motor is listed as 12V. For this listing, part number DXS642 is the main reference point. Listed voltage is 12. Published fitment references include BOBCAT 463, BOBCAT 463 2008, BOBCAT 463 2009. These details should still be checked against the original unit before ordering.

What rotation does this starter motor have?

It is listed as clockwise rotation, shown as CW. For this listing, part number DXS642 is the main reference point. Listed voltage is 12. Published fitment references include BOBCAT 463, BOBCAT 463 2008, BOBCAT 463 2009. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The starter is listed with a 10 tooth pinion. For this listing, part number DXS642 is the main reference point. Listed voltage is 12. Published fitment references include BOBCAT 463, BOBCAT 463 2008, BOBCAT 463 2009. These details should still be checked against the original unit before ordering.

What mounting details are supplied?

The unit is listed with a 2 hole starter mount, 127mm mount centres, an 89mm flange diameter, and an 11mm mount hole diameter. For this listing, part number DXS642 is the main reference point. Listed voltage is 12. Published fitment references include BOBCAT 463, BOBCAT 463 2008, BOBCAT 463 2009. These details should still be checked against the original unit before ordering.

Which applications are noted for this starter motor?

The supplied application guidance includes Bobcat 463, Bobcat 553, Bobcat MT55, and Bobcat S70. Final fitment should still be confirmed by part number and the listed measurements. For this listing, part number DXS642 is the main reference point. Listed voltage is 12. Published fitment references include BOBCAT 463, BOBCAT 463 2008, BOBCAT 463 2009. These details should still be checked against the original unit before ordering.