Denso Starter Motor 12V 2.7KW 10 Tooth CW Part No. 438000-3110

This Denso starter motor is a new 12V unit with a 2.7kW power rating, 10 teeth, clockwise rotation, and part number 438000-3110. It is listed as a starter motor for rotating electrical applications and is supplied as each, with a 12-month warranty.

The unit features a planetary gear reduction design, a 2-hole starter mount type, and an 11.5 mm mount hole diameter. The pinion diameter is 40 mm, which are the sort of details that matter when comparing the starter against the vehicle or machine it is intended to suit.

Construction details include high-voltage tested armature and field coils, premium copper terminals, and maximum cranking torque under all conditions. Those features are aimed at dependable starting performance, but the correct fit still depends on matching the part number, voltage, rotation, teeth count, and mounting details.

This starter is marked for Denso units and is described as suitable for wet or dry clutch applications. It is a practical choice for buyers who need to confirm the exact starter configuration before ordering, particularly where the original unit has the same 12V, 10-tooth, clockwise arrangement.

Key Features

• 12V starter motor
• 2.7kW power rating
• 10-tooth pinion
• Clockwise rotation (CW)
• Planetary gear reduction
• 2-hole starter mount

Specifications

• Part number: 438000-3110
• Brand: Denso
• Type: Starter motor
• Voltage: 12V
• Power rating: 2.7kW
• Rotation: CW
• Number of teeth: 10
• Mount type: 2 hole

Fitment guidance

• Fitment data supplied includes Apache models such as AS1020, AS1025, AS1030, AS1220, AS720 and AS730.
• Fitment data supplied includes Bandit Intimidator 18XP.
• Fitment data supplied includes Cummins ISB 6.7.
• Fitment data supplied includes Dynapac CA2800D.

Application and Buying Notes

Before ordering, match the part number 438000-3110 against the existing starter or the application record. This listing identifies a Denso 12V starter motor with 10 teeth, clockwise rotation, a 2.7kW rating, and a 2-hole mount, so those points should line up with the replacement unit already in the machine.

The mounting details are important here: the starter uses an 11.5 mm mount hole diameter and a 40 mm pinion diameter. Even where the voltage is correct, a mismatch in mounting style, pinion size, tooth count, or rotation can prevent proper installation or operation.

The note for wet or dry clutch use gives useful context, but it does not replace a full part check. If you are cross-referencing against an original starter, compare the physical layout, the terminal arrangement, and the gearbox style alongside the Denso part number and rotation direction.

For buyers working on Apache, Bandit, Cummins, or Dynapac applications, use the listed fitment references only as a starting point. Confirm the exact model, year where shown, and the starter details on the existing unit before purchase, especially when the machine has been modified or a previous repair has changed the starter type.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number 438000-3110 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 12 Months, Number of Teeth 10, Power Rating 2.7kW, Suits Unit Make Denso, Note Planetary Gear Reduction, New / Reman. New, Wet / Dry Clutch Wet or Dry, Product Group 1 ROTATING ELECTRICAL.

Additional published details for cross-checking include Part No. 438000-3110, Brand DENSO, Description Denso Starter Motor 12V 10Th CW, Mount Hole Diameter 11.5, Pinion Diameter 40mm, Rotation CW, Voltage 12, Item Type Starter Motor, Starter Mount Type 2 Hole.

Denso Starter Motor 12V 10Th CW. Part number 438000-3110 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number 438000-3110, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include APACHE AS1020, APACHE AS1020 2011, APACHE AS1025, APACHE AS1025 2012, BANDIT INTIMIDATOR 18XP, BANDIT INTIMIDATOR 18XP 2021. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm compatibility by matching the part number 438000-3110, 12V rating, 10 teeth, CW rotation, 2-hole mount, 11.5 mm mount hole diameter, and 40 mm pinion diameter against the original starter and application details before ordering.

FAQ

What is the part number for this starter motor?

The part number is 438000-3110. For this listing, part number 438000-3110 is the main reference point. Listed voltage is 12. Published fitment references include APACHE AS1020, APACHE AS1020 2011, APACHE AS1025. These details should still be checked against the original unit before ordering.

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number 438000-3110 is the main reference point. Listed voltage is 12. Published fitment references include APACHE AS1020, APACHE AS1020 2011, APACHE AS1025. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 12V starter motor. For this listing, part number 438000-3110 is the main reference point. Listed voltage is 12. Published fitment references include APACHE AS1020, APACHE AS1020 2011, APACHE AS1025. These details should still be checked against the original unit before ordering.

What rotation does this starter motor have?

It has clockwise rotation, noted as CW. For this listing, part number 438000-3110 is the main reference point. Listed voltage is 12. Published fitment references include APACHE AS1020, APACHE AS1020 2011, APACHE AS1025. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 10 teeth. For this listing, part number 438000-3110 is the main reference point. Listed voltage is 12. Published fitment references include APACHE AS1020, APACHE AS1020 2011, APACHE AS1025. These details should still be checked against the original unit before ordering.

What fitment details are supplied for this starter motor?

Fitment references supplied include Apache AS1020, AS1025, AS1030, AS1220, AS720 and AS730, Bandit Intimidator 18XP, Cummins ISB 6.7, and Dynapac CA2800D. For this listing, part number 438000-3110 is the main reference point. Listed voltage is 12. Published fitment references include APACHE AS1020, APACHE AS1020 2011, APACHE AS1025. These details should still be checked against the original unit before ordering.