Denso Starter Motor 12V 10 Tooth CW DXS612

The Denso starter motor DXS612 is a new 12V starter motor with a 10 tooth pinion and clockwise rotation. It is listed as a 2.7kW unit and is supplied as each, with a one year warranty. For buyers matching by part number, DXS612 is the key identifier to check against the application and mounting details.

Mounting and size details matter with starter motors, and this unit is specified with a 3 hole starter mount, 127mm mount centres A, 90mm mount centres B and 90mm mount centres C. The flange diameter is 89mm, the mount hole diameter is 12mm, and the pinion diameter is 40mm, all of which are useful checks when confirming whether the starter will suit the machine or vehicle you are working on.

This starter is described as suitable for wet or dry clutch applications and is listed as a Denso unit under the rotating electrical product group. It weighs 11kg, runs on 12 volts, and is a new replacement starter motor rather than remanufactured stock, which makes the exact specification match important before ordering.

Key Features

• New Denso starter motor
• 12V unit with clockwise rotation
• 10 tooth pinion
• 2.7kW power rating
• 3 hole starter mount
• Wet or dry clutch suitability

Specifications

• Part No.: DXS612
• Brand: Denso
• Product type: Starter Motor
• Voltage: 12V
• Rotation: CW
• Number of teeth: 10
• Power rating: 2.7kW
• Starter mount type: 3 hole

Known application groups

• Hagie STS14
• Hagie STS16
• John Deere 310SK
• John Deere 315SK
• John Deere 315SL
• John Deere 8R 250
• John Deere 8R 280
• John Deere 8R 370

Application and Buying Notes

When checking whether this DXS612 starter motor is the right match, use the part number first, then compare the electrical and mounting details. The key identifiers here are 12V voltage, 10 teeth, clockwise rotation, 2.7kW output, and the 3 hole mount with 127mm, 90mm and 90mm mount centres. If any of those do not line up with the original unit, stop and verify before fitting.

The physical dimensions also need to be checked carefully. This starter has an 89mm flange diameter, a 12mm mount hole diameter and a 40mm pinion diameter, with a listed weight of 11kg. Those measurements are practical confirmation points when comparing against the original starter on the machine, especially where there is limited room around the bellhousing or mounting flange.

For buyers working from machine application, the listed fitment includes Hagie STS14 and STS16, plus a number of John Deere applications including 310SK, 315SK, 315SL, 8R, 8RT, 8RX, R4038, R4045, R4060, Series 7, Series 8, Series 9 and W260. Even where the family name looks familiar, always confirm the specific model and year details against the installed starter and the machine build information.

Because this is a new starter motor and not a remanufactured unit, the cleanest result comes from matching both the electrical specification and the mounting pattern before purchase. The listed high-voltage tested armature and field coils, plus premium copper terminals, are useful construction details, but they do not replace a fit check against DXS612 and the original unit removed from the machine.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS612 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 127mm, Mount Centres C 90mm, Number of Teeth 10, Power Rating 2.7kW, Suits Unit Make Denso, Item Type Starter Motor, Starter Mount Type 3 Hole.

Additional published details for cross-checking include Weight 11kg, Product Group 1 ROTATING ELECTRICAL, Part No. DXS612, Brand DENSO, Description Denso Starter Motor 12V 10Th CW, Flange Diameter 89mm, Mount Centres B 90mm, Mount Hole Diameter 12, Pinion Diameter 40mm, Rotation CW.

Denso Starter Motor 12V 10Th CW. Part number DXS612 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS612, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include HAGIE STS14, HAGIE STS14 2018, HAGIE STS16, HAGIE STS16 2018, JOHN DEERE 310SK, JOHN DEERE 310SK 2013. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment by matching part number DXS612, 12V specification, 10 tooth CW rotation, 2.7kW rating, and the 3 hole mount dimensions before ordering. Application names should be used as a guide only, and the installed starter should be checked against the flange, pinion and mount centre measurements listed here.

FAQ

What is the part number for this starter motor?

The part number is DXS612.

Is this starter motor 12 volt?

Yes. The listed voltage is 12V.

What rotation does this starter use?

It is listed as clockwise rotation, or CW.

How many teeth are on the pinion?

The pinion has 10 teeth.

Is this a new or remanufactured starter motor?

It is listed as new.

Which measurements are most useful when checking fitment?

The key checks are 3 hole starter mount, 127mm mount centres A, 90mm mount centres B, 90mm mount centres C, 89mm flange diameter, 12mm mount hole diameter and 40mm pinion diameter.