Prestolite Alternator 24V 150A AVI168K3001

The Prestolite Alternator 24V 150A is a new rotating electrical unit supplied as each, with part number AVI168K3001. It is rated at 24 volts and 150 amps, so it suits applications that need a 24V charging system with a higher output alternator than lighter-duty units.

This alternator uses an internal regulator, an insulated return, and a twin leg mount. The mounting details listed are a 13 mm pivot hole diameter and 104 mm mount centre to centre, with an 8 groove pulley and an 88 mm pulley outside diameter.

It is marked as a Prestolite unit and the stated fitment references Bonluck applications, including Citystar, JXK6120, JXK6180, President 2 and Senator 14 variants. As always, the part number and mounting measurements should be checked against the existing unit before ordering.

Key Features

• 24V, 150A alternator
• New unit, not remanufactured
• Internal regulator
• 8 groove pulley
• Twin leg mount
• Insulated return

Specifications

• Brand: Prestolite
• Part No.: AVI168K3001
• Product type: Alternator
• Voltage: 24V
• Amperage: 150A
• Regulator type: Internal
• Mount type: Twin leg
• Pivot hole diameter: 13 mm

Confirmed fitment applications provided

• Bonluck Citystar
• Bonluck Citystar 2014
• Bonluck JXK6120
• Bonluck JXK6120 2012
• Bonluck JXK6180
• Bonluck JXK6180 2012
• Bonluck President 2
• Bonluck President 2 2014

Application and Buying Notes

Before ordering, match the part number AVI168K3001 and compare the mounting layout on the vehicle with the listed twin leg mount, 13 mm pivot hole diameter, and 104 mm mount centre to centre. Those dimensions are the practical checks that help confirm whether this Prestolite alternator is the same physical unit as the one being replaced.

The electrical rating is 24V and 150A, so this is intended for a 24-volt system with a substantial charging output. It also uses an internal regulator and insulated return, which are important details to confirm against the vehicle’s charging setup and wiring arrangement before installation.

The pulley details matter as well. This alternator has an 8 groove pulley with an 88 mm outside diameter, so the belt type and pulley size need to suit the existing drive arrangement. If the pulley section or diameter does not match the current unit, the alternator may not align correctly with the belt system.

The unit is new and carries a one year warranty. It also has stated design features of high temperature grease and seals for longer bearing life, plus a fan design aimed at more efficient airflow and cooler operation under high output load conditions. Those are useful construction details, but they do not replace a proper fitment check against the original alternator.

Weight is listed at 12.5 kg, which can be helpful when comparing against the existing part during identification. For a vehicle application, the safest approach is to verify the vehicle model, the mounting pattern, the pulley configuration, and the part number together rather than relying on a single detail alone.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number AVI168K3001 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Power Rating (Amp) 150, Pulley Section 8 Groove, Suits Unit Make Prestolite, Alternator Mount Twin Leg, New / Reman. New, Weight 12.5kg, Product Group 1 ROTATING ELECTRICAL.

Additional published details for cross-checking include Part No. AVI168K3001, Brand PRESTOLITE, Description Prestolite Alternator 24V 150A, Pivot Hole Diameter 13, Pulley Outside Diameter 88mm, Regulator Type Internal, Voltage 24, Mount Cnt to Cnt 104mm, Insulated Return Yes.

Prestolite Alternator 24V 150A. Part number AVI168K3001 should be checked first. Listed voltage is 24. Listed output rating is 150. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is 8 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number AVI168K3001, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 and output 150 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include BONLUCK CITYSTAR, BONLUCK CITYSTAR 2014, BONLUCK JXK6120, BONLUCK JXK6120 2012. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Please confirm fitment by checking part number AVI168K3001, the 24V 150A electrical specification, and the mounting and pulley details against the vehicle and the removed alternator before purchase.

FAQ

What is the part number for this alternator?

The part number listed is AVI168K3001.

Is this alternator new or remanufactured?

It is listed as new.

What voltage and output does it have?

It is a 24V alternator rated at 150A.

What type of regulator does it use?

It uses an internal regulator.

What mounting and pulley details are listed?

The listed mounting details are a twin leg mount, 13 mm pivot hole diameter, and 104 mm mount centre to centre. The pulley is an 8 groove design with an 88 mm outside diameter.

What fitment applications are provided?

The provided fitment references Bonluck Citystar, Bonluck JXK6120, Bonluck JXK6180, Bonluck President 2 and Bonluck Senator 14 variants, including 2012 and 2014 applications shown in the supplied data.