Mahle Alternator 12V 55A – Part No. VG073

The MAHLE Alternator 12V 55A, part number VG073, is a new OE product supplied as an each unit for rotating electrical applications. It is rated at 12 volts and 55 amps, with an internal regulator and a twin leg alternator mount, so the mounting style and electrical specification need to be checked against the existing unit before ordering.

Key physical details include 67mm inside mounting legs, a 157mm mount centre-to-centre measurement, an M8 adjusting hole diameter, an 8mm pivot hole diameter, and a 67mm pulley outside diameter. It uses an A section pulley and weighs .1kg, which are useful checks when comparing against the original alternator on the vehicle or engine.

This alternator is listed under MAHLE brand identification and carries the OEM-style description of MAHLE Alternator 12V 55A. The supplied fitment information references DEUTZ D2008L3 applications, but the safest way to confirm suitability is to match the part number VG073 and the measured mounting and pulley details to the unit being replaced.

Key Features

• New OE product
• 12V, 55A output
• Internal regulator
• Twin leg alternator mount
• A section pulley
• Part No. VG073

Specifications

• Brand: MAHLE
• Product type: Alternator
• Unit of measure: Each
• Voltage: 12V
• Power rating: 55A
• Condition: New
• Warranty: One year
• Inside mounting legs: 67mm

Known fitment references

• DEUTZ
• DEUTZ D2008L3
• DEUTZ D2008L3 1980

Application and Buying Notes

Before ordering, compare the existing alternator to the MAHLE VG073 by checking the 12V electrical system, 55A rating, twin leg mount, and the 157mm mount centre-to-centre measurement. Matching the part number is the best confirmation, but the mounting style and hole sizes are equally important because small differences can prevent installation.

The internal regulator is a key detail. If the vehicle or engine uses a different regulator arrangement, the alternator may not suit even if the pulley or housing looks similar. Confirm the pulley section is A and the pulley outside diameter is 67mm, as belt alignment and belt profile need to match the original setup.

The listed fitment references include DEUTZ D2008L3 applications, including a 1980 reference, but fitment can vary by engine build, charging system, and replacement history. Use the supplied part number VG073, along with the 67mm inside mounting legs, M8 adjusting hole, and 8mm pivot hole measurements, to cross-check the unit being replaced.

This is a new alternator supplied as an each unit and carries a one year warranty. Warranty cover does not replace the need to confirm compatibility before purchase, especially where alternators may have been changed previously or where the vehicle uses a different pulley or mount configuration.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number VG073 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Inside Mounting Legs 67mm, Power Rating (Amp) 55, Pulley Section A, Suits Unit Make Mahle, Alternator Mount Twin Leg, New / Reman. New.

Additional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. VG073, Brand MAHLE, Description Mahle Alternator 12V 55A, Adjusting Hole Diameter M8, Pivot Hole Diameter 8, Pulley Outside Diameter 67mm, Regulator Type Internal, Voltage 12, Mount Cnt to Cnt 157mm.

Mahle Alternator 12V 55A. Part number VG073 should be checked first. Listed voltage is 12. Listed output rating is 55. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is A. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number VG073, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 55 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by matching part number VG073, the 12V 55A specification, the twin leg mount, and the stated dimensions against the original alternator and vehicle or engine application details before ordering.

FAQ

What is the part number for this alternator?

The part number is VG073. For this listing, part number VG073 is the main reference point. Listed voltage is 12. Listed output rating is 55. Published fitment references include DEUTZ D2008L3, DEUTZ D2008L3 1980. These details should still be checked against the original unit before ordering.

What are the main electrical specifications?

It is a 12V alternator rated at 55A. For this listing, part number VG073 is the main reference point. Listed voltage is 12. Listed output rating is 55. Published fitment references include DEUTZ D2008L3, DEUTZ D2008L3 1980. These details should still be checked against the original unit before ordering.

What type of regulator does it use?

It uses an internal regulator. For this listing, part number VG073 is the main reference point. Listed voltage is 12. Listed output rating is 55. Published fitment references include DEUTZ D2008L3, DEUTZ D2008L3 1980. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured unit?

It is listed as new. For this listing, part number VG073 is the main reference point. Listed voltage is 12. Listed output rating is 55. Published fitment references include DEUTZ D2008L3, DEUTZ D2008L3 1980. These details should still be checked against the original unit before ordering.

What mounting details should I check?

Check the twin leg alternator mount, 67mm inside mounting legs, 157mm mount centre-to-centre, M8 adjusting hole, and 8mm pivot hole. For this listing, part number VG073 is the main reference point. Listed voltage is 12. Listed output rating is 55. Published fitment references include DEUTZ D2008L3, DEUTZ D2008L3 1980. These details should still be checked against the original unit before ordering.

What fitment references are supplied?

The supplied fitment references include DEUTZ, DEUTZ D2008L3, and DEUTZ D2008L3 1980. For this listing, part number VG073 is the main reference point. Listed voltage is 12. Listed output rating is 55. Published fitment references include DEUTZ D2008L3, DEUTZ D2008L3 1980. These details should still be checked against the original unit before ordering.