Sanden Air Conditioning Compressor 12V Direct Mount SD7H15 CXS4942

The Sanden SD7H15 air conditioning compressor is a 12V, direct mount unit supplied under part number CXS4942. It is listed with a vertical O-ring fitting type, 6 groove pulley section, 119mm clutch diameter, and a 54.38mm gauge line, which are the key details to match before ordering.

This compressor is noted as suitable for Kenworth Long Nose Truck applications from 2/2018 onward. It is also marked as not suitable for Kenworth cab over models, so the body style check matters as much as the part number when confirming the right compressor for the vehicle.

The unit is supplied as a Sanden unit with dust cover included and an oil capacity of 240ml. Warranty is listed as one year, which gives a clear baseline for purchase and installation planning, especially where the existing compressor has the same SD7H15 series and direct mount layout.

Key Features

• Sanden air conditioning compressor
• 12V electrical system
• Direct mount compressor
• SD7H15 series
• Part number CXS4942
• Vertical O-ring fitting type

Specifications

• Brand: Sanden
• Product type: Air conditioning compressor
• Series: SD7H15
• Voltage: 12V
• Compressor mounting: Direct mount
• Original equipment number: F69-1006-211V2
• Part no.: CXS4942
• Clutch diameter: 119mm

Verified fitment guidance

• Kenworth Long Nose Truck from 2/2018 onward
• Not suitable for Kenworth cab over models

Application and Buying Notes

When comparing an existing compressor, the most useful checks on this unit are the part number CXS4942, the SD7H15 series, and the direct mount configuration. The listed clutch diameter is 119mm, the pulley section is 6 groove, and the fitting type is vertical O-ring, so these details should be matched carefully against the vehicle already on hand.

Oil capacity is listed at 240ml, and the unit includes a dust cover. Those details do not replace fitment checking, but they are practical points to confirm during installation and when comparing with an existing compressor that may have a different configuration or service condition.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXS4942 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty One Year, Compressor Mounting Direct Mount, Original Equipment Number F69-1006-211V2, Series SD7H15, Voltage 12, Gauge Line 54.38mm, Dust Cover Y/N Yes.

Additional published details for cross-checking include Product Group 2 AC COMPONENTS, Part No. CXS4942, Brand SANDEN, Description Sanden Air Conditioning Compressor 12V Direct Mount SD7H15, Clutch Diameter 119mm, Fitting Type Vertical O Ring, Pulley Section 6 Groove, Suits Unit Make Sanden, Note Does not suit Kenworth cab over models, Oil Capacity 240ml.

Sanden Air Conditioning Compressor 12V Direct Mount SD7H15. Part number CXS4942 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXS4942, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include KENWORTH K-SERIES, KENWORTH K-SERIES 2018, KENWORTH T-SERIES, KENWORTH T-SERIES 1996. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Please confirm fitment by matching part number CXS4942, SD7H15 series, 12V direct mount configuration, and the stated Kenworth Long Nose Truck application before ordering. Do not rely on model name alone, and note that this compressor does not suit Kenworth cab over models.

FAQ

What part number is listed for this compressor?

The listed part number is CXS4942. For this listing, part number CXS4942 is the main reference point. Listed voltage is 12. Published fitment references include KENWORTH K-SERIES, KENWORTH K-SERIES 2018, KENWORTH T-SERIES. These details should still be checked against the original unit before ordering.

What vehicle application is stated for this compressor?

It is stated to suit Kenworth Long Nose Truck applications from 2/2018 onward. For this listing, part number CXS4942 is the main reference point. Listed voltage is 12. Published fitment references include KENWORTH K-SERIES, KENWORTH K-SERIES 2018, KENWORTH T-SERIES. These details should still be checked against the original unit before ordering.

Does this compressor suit Kenworth cab over models?

No. It is specifically noted as not suiting Kenworth cab over models. For this listing, part number CXS4942 is the main reference point. Listed voltage is 12. Published fitment references include KENWORTH K-SERIES, KENWORTH K-SERIES 2018, KENWORTH T-SERIES. These details should still be checked against the original unit before ordering.

What are the main mounting and connection details?

It is a direct mount compressor with a vertical O-ring fitting type. For this listing, part number CXS4942 is the main reference point. Listed voltage is 12. Published fitment references include KENWORTH K-SERIES, KENWORTH K-SERIES 2018, KENWORTH T-SERIES. These details should still be checked against the original unit before ordering.

What are the key size and drive details?

The listed clutch diameter is 119mm and the pulley section is 6 groove. For this listing, part number CXS4942 is the main reference point. Listed voltage is 12. Published fitment references include KENWORTH K-SERIES, KENWORTH K-SERIES 2018, KENWORTH T-SERIES. These details should still be checked against the original unit before ordering.

What warranty is listed?

A one year warranty is listed. For this listing, part number CXS4942 is the main reference point. Listed voltage is 12. Published fitment references include KENWORTH K-SERIES, KENWORTH K-SERIES 2018, KENWORTH T-SERIES. These details should still be checked against the original unit before ordering.