OEX Starter Motor 24V 11T CW Denso Style DXS619

The OEX starter motor DXS619 is a 24V unit with 11 teeth, clockwise rotation, and a 7.5kW power rating. It is described as a Denso style starter motor and is listed as a new unit, which makes the key identifiers easy to check before ordering.

This starter is a 3 hole mount design with mount centres of 127mm and 90mm, a flange diameter of 89mm, and an overall length of 315mm. Those dimensions matter when comparing against the existing starter, especially where the mounting pattern and housing size need to match closely.

Other useful measurements include a 40mm pinion diameter, 48mm pinion at rest, and 13mm mount hole diameter. The unit is noted as oil sealed and fitted with a dowell pin hole in the drive end housing, and it suits wet or dry clutch applications.

OEX states that its products are sourced from market leading original equipment manufacturers and aftermarket suppliers, are sourced from ISO certified factories, and are backed by a comprehensive nationwide warranty. The listed warranty for this starter motor is 3 years for passenger use and 1 year for commercial use.

Key Features

• 24V starter motor
• 11-tooth pinion
• Clockwise rotation
• 7.5kW power rating
• New unit
• 3 hole starter mount

Specifications

• Part No.: DXS619
• Brand: OEX
• Product type: Starter motor
• Voltage: 24
• Rotation: CW
• Number of teeth: 11
• Power rating: 7.5kW
• Starter mount type: 3 hole

Known application guidance

• BELL 700J
• BELL 850J
• JOHN DEERE 1010D
• JOHN DEERE 1110D
• JOHN DEERE 1270D
• JOHN DEERE 1410D
• JOHN DEERE 1470D
• JOHN DEERE 1490D

Application and Buying Notes

Before ordering, compare the part number DXS619, the 24V electrical system, and the 11-tooth clockwise configuration against the starter currently fitted to the machine. Starter motors can look similar while still differing in rotation, tooth count, mounting layout, or housing dimensions, so the 127mm and 90mm mount centres are important checks.

The 3 hole starter mount, 89mm flange diameter, 315mm overall length, and 13mm mount hole diameter give a practical way to compare the replacement unit with the old part. If the existing starter uses a different mounting pattern or a different flange size, it should not be assumed to fit simply because the machine model looks close.

The note that this unit suits Denso applications is another useful guide, but the safest match is always the actual physical specification and part number. For service work on heavy equipment, it is worth checking the pinion diameter of 40mm and the pinion rest position of 48mm where access allows, especially if the old starter has been replaced before.

This starter is listed as suitable for wet or dry clutch applications and is oil sealed, which may be relevant in equipment where exposure and sealing are part of the original design. The listed warranty is 3 years for passenger use and 1 year for commercial use, so it is sensible to confirm the intended duty cycle before fitting.

Application information is provided for BELL, JOHN DEERE, and LIEBHERR units, but model matching alone is not enough to confirm a fit. Use the part number, voltage, rotation, tooth count, mount type, and dimensions together when checking compatibility, particularly on machines that may have had running changes or previous replacements.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS619 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 127mm, Mount Centres C 90mm, Number of Teeth 11, Pinion at Rest 48mm, Power Rating 7.5kW, Suits Unit Make Denso, Note Oil Sealed,with Dowell pin hole in D.E housing.

Additional published details for cross-checking include New / Reman. New, Wet / Dry Clutch Wet or Dry, Product Group 1 ROTATING ELECTRICAL, Part No. DXS619, Brand OEX, Description OEX Starter Motor 24V 11Th CW Denso Style, Flange Diameter 89mm, Mount Centres B 90mm, Mount Hole Diameter 13, Overall Length 315mm.

OEX Starter Motor 24V 11Th CW Denso Style. Part number DXS619 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS619, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include BELL 700J, BELL 700J 2008, BELL 700J 2009, BELL 700J 2010, JOHN DEERE 1010D, JOHN DEERE 1010D 2000. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment by matching DXS619, 24V, 11 teeth, clockwise rotation, 3 hole mount, and the listed dimensions to the existing starter and application details before ordering.

FAQ

What is the part number for this starter motor?

The listed part number is DXS619.

What voltage does this starter motor use?

It is a 24V starter motor.

How many teeth does the pinion have?

The pinion has 11 teeth.

What is the rotation direction?

The starter motor rotates clockwise, shown as CW.

What mount type does it use?

It is a 3 hole starter mount with mount centres of 127mm, 90mm, and 90mm.

Which applications are listed for this starter?

Listed applications include BELL 700J and 850J, several JOHN DEERE D-series and loader models, and LIEBHERR L514, L518, L5242PLUS1, L5282PLUS1, LR614, and PR714.