OEX Air Conditioning Compressor 12V Direct Mount Halla HS13 Style CXH0026

The OEX Air Conditioning Compressor is a 12V direct mount unit in Halla HS13 style, supplied under part number CXH0026. It is listed with a 7 groove pulley, 114mm clutch diameter, and pad fitting type, which are the key identifiers to check before ordering.

This compressor is supplied as an AC component for cooling systems and is stated to suit Ford Ranger PX 2.2 and 3.2TD from 2011 onward. It is also listed as a Halla unit, so matching the compressor style and mounting arrangement matters as much as matching the vehicle description.

If you are replacing a failed compressor, the safest approach is to compare the part number CXH0026, the direct mount layout, the 12V specification, and the 7 groove pulley before purchase. Those details help confirm you are selecting the correct unit for the vehicle application.

The listing includes a two-year warranty and the compressor is sold each, which is useful when you are replacing a single failed unit rather than a full system. The Halla HS13 style reference, together with the pad fitting type, gives a clearer picture of the physical match required at the compressor end.

Key Features

• 12V air conditioning compressor
• Direct mount design
• Halla HS13 style
• Part number CXH0026
• 7 groove pulley
• 114mm clutch diameter

Specifications

• Brand: OEX
• Product type: Air conditioning compressor
• Voltage: 12V
• Compressor mounting: Direct mount
• Pulley section: 7 groove
• Clutch diameter: 114mm
• Fitting type: Pad
• Suits unit make: Halla

Fitment guidance

• Ford Ranger PX 2.2 and 3.2TD from 2011 onward

Application and Buying Notes

Before ordering, check the compressor part number CXH0026 against the unit being replaced, then confirm the compressor is a Halla HS13 style direct mount unit with a 12V electrical specification. Those identifiers are the most useful starting points for avoiding a mismatch.

The pulley section is listed as 7 groove and the clutch diameter as 114mm, so those measurements should be compared carefully with the existing compressor and belt arrangement. A compressor can look similar at a glance but still differ in mounting or drive detail.

The fitment note supplied for this unit is Ford Ranger PX 2.2 and 3.2TD from 2011 onward. If you are working on a vehicle outside that application, or if the existing compressor details do not match CXH0026, the correct course is to verify the exact application before fitting.

The two-year warranty applies to the product as listed, but warranty coverage does not replace the need to confirm compatibility first. Matching the brand, part number, voltage, mounting style, and pulley details remains the most reliable way to order with confidence.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXH0026 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty Two Years, Compressor Mounting Direct Mount, Pulley Section 7 Groove, Voltage 12, Product Group 2 AC COMPONENTS, Part No. CXH0026, Brand OEX.

Additional published details for cross-checking include Description OEX Air Conditioning Compressor 12V Direct Mount Halla HS13 Style, Clutch Diameter 114mm, Fitting Type Pad, Suits Unit Make Halla, Dust Cover Y/N No, Product Group 1 COOLING.

OEX Air Conditioning Compressor 12V Direct Mount Halla HS13 Style. Part number CXH0026 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is 7 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXH0026, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Always confirm fitment using part number CXH0026, the Halla HS13 style direct mount layout, the 12V specification, and the 7 groove pulley before purchase. Vehicle application details should be checked against the existing compressor and the intended Ford Ranger PX 2.2 or 3.2TD from 2011 onward use.

FAQ

What is the part number for this compressor?

The listed part number is CXH0026. For this listing, part number CXH0026 is the main reference point. Listed voltage is 12. Published fitment references include FORD RANGER, FORD RANGER 2011, FORD RANGER 2012. These details should still be checked against the original unit before ordering.

What vehicle application is supplied for this compressor?

It is stated to suit Ford Ranger PX 2.2 and 3.2TD from 2011 onward. For this listing, part number CXH0026 is the main reference point. Listed voltage is 12. Published fitment references include FORD RANGER, FORD RANGER 2011, FORD RANGER 2012. These details should still be checked against the original unit before ordering.

What voltage does this compressor use?

It is a 12V air conditioning compressor. For this listing, part number CXH0026 is the main reference point. Listed voltage is 12. Published fitment references include FORD RANGER, FORD RANGER 2011, FORD RANGER 2012. These details should still be checked against the original unit before ordering.

What mounting style does it have?

It is listed as a direct mount compressor with a pad fitting type. For this listing, part number CXH0026 is the main reference point. Listed voltage is 12. Published fitment references include FORD RANGER, FORD RANGER 2011, FORD RANGER 2012. These details should still be checked against the original unit before ordering.

What pulley and clutch details are supplied?

The compressor is listed with a 7 groove pulley section and a 114mm clutch diameter. For this listing, part number CXH0026 is the main reference point. Listed voltage is 12. Published fitment references include FORD RANGER, FORD RANGER 2011, FORD RANGER 2012. These details should still be checked against the original unit before ordering.

Is there a warranty listed?

Yes. The compressor is listed with a two-year warranty. For this listing, part number CXH0026 is the main reference point. Listed voltage is 12. Published fitment references include FORD RANGER, FORD RANGER 2011, FORD RANGER 2012. These details should still be checked against the original unit before ordering.