Mahle Alternator 12V 120A MG927

The Mahle alternator listed here is a 12V unit with a 120A charge current, supplied as a new alternator under part number MG927. It is specified with an internal regulator, clockwise rotation, a single leg mount, and a W connector/clamp, which are important details to check against the unit being replaced.

This alternator is identified with OEM number 11.205.324 and Pin Code IR200. The mounting details include a 56mm mount leg thickness, 56mm mounting bores distance, 10mm pivot hole diameter, 10mm adjusting hole diameter, and a 17mm shaft diameter, so matching the physical layout is just as important as matching the electrical rating.

Mahle lists this alternator with a multi-function regulator and notes compliance with international standards for electromagnetic compatibility. It is also described as ISO 9001 certified and manufactured using the latest technologies and materials, giving you clear identification and build context when comparing it with the original part.

The pulleys section is not applicable for this unit, and the product is shown as rotation clockwise. If you are comparing alternators side by side, the combination of 12V, 120A, internal regulator, single leg mount, and MG927 part number provides the most reliable starting point before ordering.

Key Features

• 12V alternator with 120A charge current
• New unit, supplied each
• Internal regulator with multi-function regulator note
• Clockwise rotation
• Single leg mount
• W connector/clamp

Specifications

• Brand: Mahle
• Part number: MG927
• OEM number: 11.205.324
• Voltage: 12V
• Charge current: 120A
• Power rating: 120A
• Regulator type: Internal
• Rotation: CW

Fitment notes

• Verified fitment data supplied for MECALAC MCR8, including MECALAC MCR8 2017.
• Verified fitment data supplied for MERLO TF35.7, including MERLO TF35.7 2019.
• Verified fitment data supplied for MERLO TF35.7 115EE, including MERLO TF35.7 115EE 2021.

Application and Buying Notes

Before ordering, compare the part number MG927 and OEM number 11.205.324 with the alternator already fitted to the machine. Matching the electrical specification matters as well: this unit is 12V and rated at 120A, so it needs to suit the charging system already installed.

Check the mounting arrangement carefully. The listed details include a single leg alternator mount, 56mm mount leg thickness, 56mm mounting bores distance, 10mm pivot hole diameter, 10mm adjusting hole diameter, and a 17mm shaft diameter. Those measurements help confirm whether the replacement will physically line up with the existing brackets and hardware.

The connector style is listed as W, and the regulator type is internal. That means the plug arrangement and charging control style should be matched to the original unit rather than assumed to be interchangeable. The note also mentions a multi-function regulator, so it is worth confirming the electrical setup on the machine before fitting.

This alternator is shown with clockwise rotation and a pulley section marked not applicable. If the original alternator differs in rotation or pulley arrangement, do not rely on the appearance alone. Compare the existing unit, the mounting points, and the identification numbers before you commit to the purchase.

The supplied fitment information includes MECALAC MCR8 and MERLO TF35.7 applications, along with MERLO TF35.7 115EE references. Even where those applications are listed, the safest approach is still to confirm the exact machine details, year where applicable, and the part number on the existing alternator, because equipment variations can occur within the same model range.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MG927 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Mount Leg Thickness 56mm, Pivot Hole Diameter 10, Pulley Section Not Applicable, Rotation CW, Suits Unit Make Mahle, Note Multi-function regulator, Item Type Alternator.

Additional published details for cross-checking include New / Reman. New, Alternator Charge Current [A] 120, Connector / Clamp W, Mounting Bores Distance 56, Packaging length 24.8, Packaging height 17.50, Product Group 2 ALTERNATORS, Part No. MG927, Brand MAHLE.

Mahle Alternator 12V 120A. Part number MG927 should be checked first. Listed voltage is 12. Listed output rating is 120. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Single Leg. Regulator type is Internal. Pulley configuration is Not Applicable. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MG927, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

Compatibility note: Please confirm compatibility using the MG927 part number, OEM number 11.205.324, and the listed mounting and electrical details before ordering. If the original alternator differs in voltage, amperage, rotation, connector type, or mount dimensions, it should not be assumed compatible.

FAQ

What is the part number for this alternator?

The part number is MG927. The OEM number listed is 11.205.324.

What voltage and output does this alternator have?

It is a 12V alternator with a 120A charge current and a 120A power rating.

Is this alternator new or remanufactured?

It is listed as new.

What regulator type does it use?

It uses an internal regulator, and the note also states multi-function regulator.

What mounting details are provided?

The listed mounting details include a single leg mount, 56mm mount leg thickness, 56mm mounting bores distance, 10mm pivot hole diameter, 10mm adjusting hole diameter, and a 17mm shaft diameter.

Which machines are shown with fitment data?

The supplied fitment data includes MECALAC MCR8, MECALAC MCR8 2017, MERLO TF35.7, MERLO TF35.7 2019, MERLO TF35.7 115EE, and MERLO TF35.7 115EE 2021.