Nikko Starter Motor 24V 3.0KW 11 Tooth CW NXS9728

The Nikko starter motor listed here is a new 24V unit with clockwise rotation, 11 teeth, and a 3.0kW power rating. It is identified by part number NXS9728 and OEM number 0-24000-0060, and it is supplied as an Original Equipment part.

Key physical details include a 95mm flange diameter, 120mm mount centre to centre, a 2 hole starter mount type, a 13mm mount hole diameter, and a 40mm pinion diameter. The pinion at rest is 19mm, which is a useful check when comparing against the removed starter.

This unit is listed for Nikko applications and is commonly referenced against Komatsu equipment in the provided fitment data. Because starter motors need the correct voltage, rotation, mount pattern, and tooth count to match properly, it is important to compare the full specification set before ordering.

Key Features

• New starter motor
• Original Equipment part
• 24V electrical system
• 3.0kW power rating
• Clockwise rotation
• 11 tooth pinion

Specifications

• Brand: Nikko
• Product type: Starter motor
• Part number: NXS9728
• OEM number: 0-24000-0060
• Voltage: 24V
• Power rating: 3.0kW
• Rotation: CW
• Number of teeth: 11

Listed fitment references

• Komatsu compressor
• Komatsu D20
• Komatsu D20-6
• Komatsu D20-7
• Komatsu D21-6
• Komatsu engine
• Komatsu engine EM436
• Komatsu FD20

Application and Buying Notes

Before ordering, compare the part number NXS9728 and OEM number 0-24000-0060 with the starter you are replacing. The most important matching points on this unit are 24V, clockwise rotation, 11 teeth, a 2 hole mount, and the 120mm mount centre to centre measurement.

The listed physical dimensions also matter. A starter with the wrong 95mm flange diameter, 13mm mount hole diameter, or 40mm pinion diameter may not seat correctly, even if the general application appears close. The 19mm pinion at rest is another useful reference when checking side-by-side with the old unit.

This starter is recorded as a Nikko unit and is shown against several Komatsu applications in the fitment data. As with any rotating electrical part, confirm the machine model, engine, compressor, or generator application carefully, because changes in mounting pattern or drive configuration can affect compatibility.

The unit is new and carries a one year warranty. That does not remove the need to verify the specifications first, but it does give the buyer a clear point of reference when choosing between replacement options for the same application.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number NXS9728 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Hole Diameter 13, Pinion at Rest 19mm, Power Rating 3.0kW, Suits Unit Make Nikko, Item Type Starter Motor, New / Reman. New, OEM Number 0-24000-0060.

Additional published details for cross-checking include Product Group 2 STARTER MOTORS, Part No. NXS9728, Brand NIKKO, Description Nikko Starter Motor 24V 11Th CW, Flange Diameter 95mm, Number of Teeth 11, Pinion Diameter 40mm, Rotation CW, Voltage 24.

Nikko Starter Motor 24V 11Th CW. Part number NXS9728 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number NXS9728, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include KOMATSU COMPRESSOR, KOMATSU COMPRESSOR 1986, KOMATSU COMPRESSOR 1991, KOMATSU D20. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Please confirm fitment by matching the part number NXS9728, OEM number 0-24000-0060, voltage, rotation, tooth count, mounting pattern, and physical dimensions against the removed starter and the equipment application before purchasing.

FAQ

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number NXS9728 is the main reference point. Listed voltage is 24. Published fitment references include KOMATSU COMPRESSOR, KOMATSU COMPRESSOR 1986, KOMATSU COMPRESSOR 1991. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 24V starter motor. For this listing, part number NXS9728 is the main reference point. Listed voltage is 24. Published fitment references include KOMATSU COMPRESSOR, KOMATSU COMPRESSOR 1986, KOMATSU COMPRESSOR 1991. These details should still be checked against the original unit before ordering.

What rotation does this starter use?

It is clockwise rotation, shown as CW. For this listing, part number NXS9728 is the main reference point. Listed voltage is 24. Published fitment references include KOMATSU COMPRESSOR, KOMATSU COMPRESSOR 1986, KOMATSU COMPRESSOR 1991. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The starter is listed with 11 teeth. For this listing, part number NXS9728 is the main reference point. Listed voltage is 24. Published fitment references include KOMATSU COMPRESSOR, KOMATSU COMPRESSOR 1986, KOMATSU COMPRESSOR 1991. These details should still be checked against the original unit before ordering.

What part number should I match against my old unit?

The listed part number is NXS9728, and the OEM number is 0-24000-0060. For this listing, part number NXS9728 is the main reference point. Listed voltage is 24. Published fitment references include KOMATSU COMPRESSOR, KOMATSU COMPRESSOR 1986, KOMATSU COMPRESSOR 1991. These details should still be checked against the original unit before ordering.

What fitment should I check before ordering?

Match the voltage, rotation, tooth count, 2 hole mount, 120mm mount centre to centre, 95mm flange diameter, 13mm mount hole diameter, and the application shown for your machine. For this listing, part number NXS9728 is the main reference point. Listed voltage is 24. Published fitment references include KOMATSU COMPRESSOR, KOMATSU COMPRESSOR 1986, KOMATSU COMPRESSOR 1991. These details should still be checked against the original unit before ordering.