Denso Starter Motor 12V 11T CCW DXS652

The Denso DXS652 starter motor is a 12V remanufactured unit with 11 teeth and CCW rotation. It is listed as a heavy commercial starter motor and is supplied as an Original Equipment part. For buyers matching by numbers, the OEM number shown is 9771280-711.

This starter has a 2 hole mount type, 105mm mount centres, a 75mm flange diameter, and M8x1.25 mount holes. Other recorded dimensions include an overall length of 205mm, a pinion diameter of 34mm, and a pinion at rest measurement of 34mm.

The unit weighs 3.24kg and is listed for Denso applications. The part number is DXS652 and the product is sold as each, with a one year warranty. If you are replacing an existing starter, these dimensions and identifiers are the most useful checks before ordering.

Key Features

• 12V starter motor
• 11 tooth pinion
• CCW rotation
• 2 hole mounting
• Original Equipment part
• Remanufactured unit

Specifications

• Brand: Denso
• Part No.: DXS652
• OEM Number: 9771280-711
• Voltage: 12
• Number of Teeth: 11
• Rotation: CCW
• Starter Mount Type: 2 Hole
• Mount Centres A: 105mm

Fitment guidance

• Listed application support includes Kubota K-005.
• Listed application support includes Kubota K-005 1998.

Application and Buying Notes

Check the part number DXS652 first, then compare the OEM number 9771280-711 if you are cross-referencing an existing starter. The key physical match points on this unit are 12V, 11 teeth, CCW rotation, and a 2 hole mount with 105mm mount centres.

Measure the mounting face carefully before purchase. The starter uses M8x1.25 mount holes, has a 75mm flange diameter, and an overall length of 205mm. Those dimensions matter when you are matching a replacement to an installed unit, especially on heavy commercial equipment where clearances can be tight.

The pinion details are also important. This starter is listed with a 34mm pinion diameter and 34mm pinion at rest measurement. If your original starter differs in tooth count, rotation, voltage, or mounting layout, do not assume it will interchange without confirming the application.

Because this is a remanufactured Denso starter motor, it is sensible to compare the unit against your old starter before fitting. Match the mounting style, electrical voltage, physical dimensions, and any application references you have on hand. When in doubt, use the part number and OEM number together rather than relying on appearance alone.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS652 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR HEAVY COMM, Unit of Measure EACH, Warranty One Year, Mount Centres A 105mm, Number of Teeth 11, Pinion at Rest 34mm, Rotation CCW, Voltage 12, Starter Mount Type 2 Hole, Weight 3.24kg.

Additional published details for cross-checking include Product Group 1 ROTATING ELECTRICAL, Part No. DXS652, Brand DENSO, Description Denso Starter Motor 12V 11TH CCW, Flange Diameter 75mm, Mount Hole Diameter M8x1.25, Overall Length 205mm, Pinion Diameter 34mm, Suits Unit Make Denso, New / Reman. Remanufactured.

Denso Starter Motor 12V 11TH CCW. Part number DXS652 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS652, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor heavy comm in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include KUBOTA K-005, KUBOTA K-005 1998. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment using the DXS652 part number, OEM number 9771280-711, and the physical specifications before ordering. If your application is not one of the listed Kubota references, check the existing starter details carefully to avoid a mismatch.

FAQ

What is the part number for this starter motor?

The part number listed is DXS652. For this listing, part number DXS652 is the main reference point. Listed voltage is 12. Published fitment references include KUBOTA K-005, KUBOTA K-005 1998. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 12V starter motor. For this listing, part number DXS652 is the main reference point. Listed voltage is 12. Published fitment references include KUBOTA K-005, KUBOTA K-005 1998. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion is listed with 11 teeth. For this listing, part number DXS652 is the main reference point. Listed voltage is 12. Published fitment references include KUBOTA K-005, KUBOTA K-005 1998. These details should still be checked against the original unit before ordering.

What rotation does this starter use?

It is listed as CCW rotation. For this listing, part number DXS652 is the main reference point. Listed voltage is 12. Published fitment references include KUBOTA K-005, KUBOTA K-005 1998. These details should still be checked against the original unit before ordering.

What fitment information is supplied?

Listed application support includes Kubota K-005 and Kubota K-005 1998. For this listing, part number DXS652 is the main reference point. Listed voltage is 12. Published fitment references include KUBOTA K-005, KUBOTA K-005 1998. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured unit?

It is listed as a remanufactured starter motor. For this listing, part number DXS652 is the main reference point. Listed voltage is 12. Published fitment references include KUBOTA K-005, KUBOTA K-005 1998. These details should still be checked against the original unit before ordering.