Tridon EG23 24V 3 Pin Electro Mechanical Flasher Unit

The Tridon EG23 is a 24V, 3 pin electro mechanical flasher unit designed for flasher and hazard light applications. It is rated for an operating voltage of 22 to 30 volts D.C., which makes the voltage range an important check before ordering for a 24V electrical system.

The part number is EG23 and the brand is Tridon. It is supplied as a flasher unit, sold each, and carries a one year warranty. If you are replacing an existing flasher, the 3 pin layout and 24V specification are the key identifiers to compare first.

Key Features

• Electro mechanical flasher, HD12 type
• 3 pin design
• 24V unit
• Operating voltage 22 to 30 volts D.C.
• Not polarity sensitive
• Suitable for flasher and hazard light applications

Specifications

• Brand: Tridon
• Part No.: EG23
• Description: Tridon Flasher 24V 3 Pin
• Type: Flasher unit
• Number of pins: 3
• Voltage: 24V
• Operating voltage: 22 to 30 volts D.C.
• Load rating: 1 to 6 x 25W

Application and Buying Notes

Before buying, confirm the existing unit is a 24V flasher with 3 pins and that the application falls within the 22 to 30 volts D.C. operating range. The EG23 is intended for flasher and hazard light use, so matching the circuit purpose is just as important as matching the connector style.

The load rating is listed as 1 to 6 x 25W, so it is worth checking the lamp load in the circuit rather than relying on appearance alone. A flasher unit can look similar across different vehicles or equipment, but pin count, voltage, and load rating are the practical checks that matter most here.

Because this unit is not polarity sensitive, it can suit both positive and negative ground vehicles. That said, you should still confirm the vehicle or machine uses a 24V system and that the original unit is an equivalent 3 pin flasher before fitting.

If you are replacing a failed flasher, the part number EG23 is the safest reference point. Where possible, compare the old unit, plug style, and application details side by side so the replacement matches the electrical setup already in the vehicle.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number EG23 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type FLASHER UNIT, Unit of Measure EACH, Warranty One Year, Product Group 2 FUSES BREAKERS RELAYS SWITCHES, Part No. EG23, Brand TRIDON, Description Tridon Flasher 24V 3 Pin, Number of Pins 3, Product Group 1 AUTO ELEC ACCESSORIES.

Tridon Flasher 24V 3 Pin. Part number EG23 should be checked first. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number EG23, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a flasher unit in workshop, fleet, trade, agricultural, or construction service, the listed electrical specification should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm fitment by checking the part number EG23, the 3 pin connector layout, the 24V system requirement, and the 22 to 30 volts D.C. operating range before purchase.

FAQ

What is the Tridon EG23?

It is a Tridon electro mechanical flasher unit with a 3 pin layout and 24V rating. The part number is EG23. For this listing, part number EG23 is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number EG23 is the main reference point. These details should still be checked against the original unit before ordering.

Is this flasher polarity sensitive?

No. It is stated as not polarity sensitive, so it can be used on both positive and negative ground vehicles. For this listing, part number EG23 is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number EG23 is the main reference point. These details should still be checked against the original unit before ordering.

What voltage range does it work in?

The operating voltage is listed as 22 to 30 volts D.C., with the unit specified as 24V. For this listing, part number EG23 is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number EG23 is the main reference point. These details should still be checked against the original unit before ordering.

What is the load rating?

The load rating is 1 to 6 x 25W. For this listing, part number EG23 is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number EG23 is the main reference point. These details should still be checked against the original unit before ordering.

What applications is it suitable for?

It is suitable for flasher and hazard light applications. For this listing, part number EG23 is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number EG23 is the main reference point. These details should still be checked against the original unit before ordering.

Does it come with a warranty?

Yes. The listed warranty is one year. For this listing, part number EG23 is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number EG23 is the main reference point. These details should still be checked against the original unit before ordering.