Narva Push/pull Switch Off/on Spst 75A 12V Part No. 60018BL

The Narva Push/Pull Switch is an Off/On SPST switch with contacts rated at 75A at 12V and 37.5A at 24V, making it a heavy-duty panel-mount control for suitable electrical applications. It uses a 2-terminal layout, a 12mm mounting opening, and a 13mm mount length, so the panel cut-out and depth need to be checked before purchase.

It is a non-illuminated switch with a chrome knob, copper screw terminals, and a heavy duty die cast body. The switch action is push-pull, with 2 positions and 1 pole, and it is supplied as each under Narva part number 60018BL.

For buyers comparing control hardware, the key details are the 75A current rating at 12V, the 12mm mount diameter, and the Off/On SPST switching arrangement. Those measurements are the practical checks that matter most when matching the switch to an existing panel or a new installation.

The one-year warranty applies to the item as supplied, and the unit weighs 0.07kg. If you are replacing an existing switch, the part number 60018BL and the 12mm mounting opening are the best reference points to confirm you are selecting the right component.

Key Features

• Narva push/pull switch with Off/On SPST action
• 75A rated at 12V, 37.5A rated at 24V
• Heavy duty die cast body
• Chrome knob with copper screw terminals
• Panel mount design
• Non-illuminated switch

Specifications

• Brand: Narva
• Part No.: 60018BL
• Product type: Switch
• Switch type: Push-Pull
• Switch action: Off - On - SPST
• Power rating: 75A
• Voltage: 12V
• Amperage rating: 75A @ 12V, 37.5A @ 24V

Application and Buying Notes

Before ordering, confirm the panel opening is 12mm diameter and allow for the 13mm mount length, as those two dimensions determine whether the switch will physically seat in the panel. The switch is a 2-terminal, 1-pole, Off/On SPST unit, so it should be matched to the wiring layout and function required by the circuit.

The current rating is the most important electrical check: 75A at 12V and 37.5A at 24V. Those figures are suitable for heavy-duty use within the stated limits, but the switch still needs to be matched to the actual load, wiring size, and circuit protection used in the vehicle or accessory system.

Because the switch is non-illuminated, it does not provide a built-in lamp or indicator. If the installation needs a lighted switch face, that requirement would need to be handled separately, as lamp colour is listed as not applicable.

The chrome knob, copper screw terminals, and die cast body are practical details that matter for installation and use, especially where a solid panel mount is preferred. Check the depth behind the panel and the terminal access before fitting, particularly where the switch is being installed in a tight dash or control panel.

If you are replacing a failed switch, compare the existing part number, the mounting opening, and the switch action first. The best match will usually be the one that aligns with the same 12mm mount diameter, Off/On SPST function, and the same general terminal arrangement.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number 60018BL helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Number of Terminals 2, Switch Action Off - On - SPST, Lamp Colour/s Not Applicable, Mount Length 13mm, Number of Positions 2, Switch Illumination Non Illuminated.

Additional published details for cross-checking include Product Group 2 FUSES BREAKERS RELAYS SWITCHES, Part No. 60018BL, Brand NARVA, Description Narva Push/Pull Switch Off/On SPST (Contacts Rated 75A @ 12V), Number of Speeds 1, Power Rating (Amp) 75, Voltage 12, Mount Diameter 12mm, Number of Poles 1, Switch Type Push - Pull.

Narva Push/Pull Switch Off/On SPST (Contacts Rated 75A @ 12V). Part number 60018BL should be checked first. Listed voltage is 12. Listed output rating is 75. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number 60018BL, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 75 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

Compatibility note: Confirm fitment by checking the part number 60018BL, the 12mm mounting opening, the 13mm mount length, and the Off/On SPST switch action against your existing switch and panel requirements before ordering.

FAQ

What is the part number for this Narva switch?

The part number is 60018BL.

Is this switch illuminated?

No. It is listed as non-illuminated, and lamp colour is not applicable.

What is the mounting hole size?

The mounting opening is 12mm diameter, and the mount diameter is also listed as 12mm.

How many terminals does it have?

It has 2 terminals.

What is the current rating?

It is rated at 75A at 12V and 37.5A at 24V.

What switch action does it use?

It uses an Off - On SPST switch action and is a push-pull type with 2 positions.