Sanden Air Conditioning Compressor 12V Direct Mount PXV16 CXS8629
This Sanden air conditioning compressor is a 12V direct mount PXV16 unit, sold as a single each and identified by part number CXS8629. It uses a 5 groove pulley, a 125mm clutch diameter, and a pad at 45 degree fitting type, which are the key physical checks to compare before ordering.
The compressor is listed with SP10 oil type and a 120ml oil capacity, and it has a PQC head code. It weighs 6.4kg and does not have a dust cover. Those details matter when matching a replacement compressor to the vehicle setup already in place.
Supplied as a Sanden unit, this compressor is noted for Holden Astra TS Z22SE 2.2L from 01/2001 to 12/2006 and Holden Zafira TT Z22SE 2.2L from 06/2001 to 12/2005. The fitting and pulley details still need to be checked against the vehicle’s existing system before purchase.
Key Features
- 12V direct mount PXV16 air conditioning compressor
- Part number CXS8629
- 5 groove pulley
- 125mm clutch diameter
- Pad at 45 degree fitting type
- SP10 oil type
Specifications
- Brand: Sanden
- Product type: Air conditioning compressor
- Series: PXV16
- Voltage: 12V
- Compressor mounting: Direct mount
- Pulley section: 5 groove
- Clutch diameter: 125mm
- Fitting type: Pad at 45 degree
Verified fitment details
- Holden Astra TS Z22SE 2.2L from 01/2001 to 12/2006
- Holden Zafira TT Z22SE 2.2L from 06/2001 to 12/2005
Application and Buying Notes
Before ordering, match the part number CXS8629 and confirm the compressor style on the vehicle is a 12V direct mount PXV16 with a 5 groove pulley. The listed 125mm clutch diameter and pad at 45 degree fitting type are important because compressor mount and drive layout can vary even within similar model ranges.
The oil specification also needs attention. This unit is listed for SP10 oil with a 120ml oil capacity, so it should only be considered where that specification suits the application or where the system has been prepared accordingly. If the wrong oil type is used, the compressor may not be suitable for the job even when the physical mounting appears close.
The fitment notes supplied here are limited to Holden Astra TS Z22SE 2.2L from 01/2001 to 12/2006 and Holden Zafira TT Z22SE 2.2L from 06/2001 to 12/2005. Check the vehicle build date, engine code, pulley count, mounting arrangement, and the existing compressor details before purchase, as air conditioning parts are often application sensitive.
If you are comparing an old compressor, confirm the clutch diameter, groove count, head code, and fitting angle rather than relying on appearance alone. The unit is supplied as a Sanden PXV16 compressor with no dust cover, so a direct physical comparison is the safest way to avoid unnecessary returns or installation delays.
Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.
For workshop, fleet, and equipment applications, accurate identification of part number CXS8629 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.
Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty One Year, Compressor Mounting Direct Mount, Pulley Section 5 Groove, Suits Unit Make Sanden, Note Oil Type SP10 ., Oil Capacity 120ml, Head Code PQC Head.
Additional published details for cross-checking include Product Group 2 AC COMPONENTS, Part No. CXS8629, Brand SANDEN, Description Sanden Air Conditioning Compressor 12V Direct Mount PXV16, Clutch Diameter 125mm, Fitting Type Pad at 45 deg., Series PXV16, Voltage 12, Gauge Line 55.64mm, Dust Cover Y/N No.
Sanden Air Conditioning Compressor 12V Direct Mount PXV16. Part number CXS8629 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.
Pulley configuration is 5 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.
For part number CXS8629, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.
For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.
Available application references include HOLDEN ASTRA, HOLDEN ASTRA 2000, HOLDEN ASTRA 2001, HOLDEN ASTRA 2002, SAAB 9-3, SAAB 9-3 2001. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.
The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.
Compatibility note: Confirm fitment by matching part number CXS8629, the 12V PXV16 direct mount layout, and the vehicle application details before ordering. If the existing compressor differs in pulley section, clutch diameter, fitting angle, or oil specification, stop and verify the application first.
FAQ
What is the part number for this compressor?
The listed part number is CXS8629.
What vehicles are specifically noted for this compressor?
The supplied fitment notes list Holden Astra TS Z22SE 2.2L from 01/2001 to 12/2006 and Holden Zafira TT Z22SE 2.2L from 06/2001 to 12/2005.
What voltage does this compressor use?
It is a 12V air conditioning compressor.
What pulley and clutch details are listed?
It has a 5 groove pulley and a 125mm clutch diameter.
What oil specification is listed?
The listed oil type is SP10, and the oil capacity is 120ml.
Does this compressor have a warranty?
Yes. It is listed with a one year warranty.
Shipping – General Items
Shipping for general items is calculated at checkout based on the item’s size, weight, and delivery location.
Images
All product images are for illustrative purposes only. Actual products may vary due to updates, design changes, or slight differences in colour and appearance. We strive to ensure accuracy, but variations may occur depending on your device's display or manufacturer updates.