Denso Air Conditioning Compressor 12V Direct Mount 10S20H Part No. CXD6376

The Denso Air Conditioning Compressor listed here is a 12V unit in the 10S20H series with direct mount compressor mounting and a pad fitting type. It is identified by part number CXD6376 and original equipment number 471-0522DD, so those references are the first checks to make before ordering.

This compressor is supplied as an each item and is listed with a clutch diameter of 126mm, a 6 groove pulley section, and an oil capacity of 266ml. The specified oil type is PAG46, which is an important detail to confirm against the vehicle system before installation.

The stated application is Chrysler Voyager RG 3.3L from 04/2001 to 03/2008. Because air conditioning compressors need to match both the physical mounting style and the vehicle application, part number and fitment details should be checked carefully rather than relying on appearance alone.

Key Features

• Denso air conditioning compressor
• 12V electrical system
• 10S20H series
• Direct mount compressor mounting
• Pad fitting type
• 6 groove pulley section

Specifications

• Brand: Denso
• Type: Air conditioning compressor
• Unit of measure: Each
• Compressor mounting: Direct mount
• Voltage: 12
• Series: 10S20H
• Original equipment number: 471-0522DD
• Part No.: CXD6376

Fitment

• Chrysler Voyager RG 3.3L, 04/2001 - 03/2008

Application and Buying Notes

Before buying, compare the compressor mounting style, fitting type and electrical specification with the unit being replaced. This unit is a 12V direct mount compressor with a pad fitting type, so those details need to line up with the vehicle’s existing arrangement. The clutch diameter is 126mm and the pulley section is 6 groove, which are also useful identification points when checking the replacement.

The listed application is Chrysler Voyager RG 3.3L from 04/2001 to 03/2008. If your vehicle falls outside that range, or if the system has been modified, the safest approach is to verify by part number CXD6376 or OEM number 471-0522DD rather than assuming interchange from the model name alone.

Weight is listed at 6.7kg, which can help with handling and shipping expectations, but it should not be used as a fitment check. The most dependable checks remain the part number, mounting style, voltage, pulley configuration and the stated vehicle application.

If you are comparing against a removed compressor, note that the dust cover is listed as No and the unit is supplied as a single each item. Confirm the existing compressor’s connector, mount arrangement and belt drive setup match the replacement before committing to the job.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXD6376 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty One Year, Compressor Mounting Direct Mount, Original Equipment Number 471-0522DD, Series 10S20H, Voltage 12, Oil Capacity 266ml, Weight 6.7kg, Product Group 1 COOLING.

Additional published details for cross-checking include Part No. CXD6376, Brand DENSO, Description Denso Air Conditioning Compressor 12V Direct Mount 10S20H, Clutch Diameter 126mm, Fitting Type Pad, Pulley Section 6 Groove, Suits Unit Make Denso, Note Oil Type Pag46, Dust Cover Y/N No.

Denso Air Conditioning Compressor 12V Direct Mount 10S20H. Part number CXD6376 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXD6376, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Please confirm fitment using part number CXD6376, OEM number 471-0522DD, and the stated Chrysler Voyager RG 3.3L 04/2001 - 03/2008 application before ordering. If any detail differs, check the vehicle and system specifications carefully with Micks Gone Bush.

FAQ

What vehicle application is listed for this compressor?

The listed application is Chrysler Voyager RG 3.3L from 04/2001 to 03/2008. For this listing, part number CXD6376 is the main reference point. Listed voltage is 12. Published fitment references include CHRYSLER VOYAGER, CHRYSLER VOYAGER 2000, CHRYSLER VOYAGER 2001. These details should still be checked against the original unit before ordering.

What is the part number for this compressor?

The part number listed is CXD6376. For this listing, part number CXD6376 is the main reference point. Listed voltage is 12. Published fitment references include CHRYSLER VOYAGER, CHRYSLER VOYAGER 2000, CHRYSLER VOYAGER 2001. These details should still be checked against the original unit before ordering.

What original equipment number is shown?

The original equipment number listed is 471-0522DD. For this listing, part number CXD6376 is the main reference point. Listed voltage is 12. Published fitment references include CHRYSLER VOYAGER, CHRYSLER VOYAGER 2000, CHRYSLER VOYAGER 2001. These details should still be checked against the original unit before ordering.

What are the main mounting and drive details?

It is a direct mount compressor with a pad fitting type, a 126mm clutch diameter, and a 6 groove pulley section. For this listing, part number CXD6376 is the main reference point. Listed voltage is 12. Published fitment references include CHRYSLER VOYAGER, CHRYSLER VOYAGER 2000, CHRYSLER VOYAGER 2001. These details should still be checked against the original unit before ordering.

What oil specification is listed?

The compressor is listed with 266ml oil capacity and PAG46 oil type. For this listing, part number CXD6376 is the main reference point. Listed voltage is 12. Published fitment references include CHRYSLER VOYAGER, CHRYSLER VOYAGER 2000, CHRYSLER VOYAGER 2001. These details should still be checked against the original unit before ordering.

What warranty is stated?

A one year warranty is listed. For this listing, part number CXD6376 is the main reference point. Listed voltage is 12. Published fitment references include CHRYSLER VOYAGER, CHRYSLER VOYAGER 2000, CHRYSLER VOYAGER 2001. These details should still be checked against the original unit before ordering.