Mitsubishi Starter Motor 24V 12T CW M9T61671AMA

The Mitsubishi Starter Motor M9T61671AMA is a new 24V unit with 12 teeth and clockwise rotation. It is listed as a 5.5kW starter motor with a 3 hole mount type, a 92mm flange diameter, and 126mm mount centres across A, B and C.

This starter motor suits Mitsubishi applications and is also shown against selected CASE and IVECO models in the fitment data provided. The applications include CASE 335B and 340B, plus IVECO Eurorider, Eurotech MP, Powerstar, Stralis and Trakker variants, so matching the part number and application details is important before ordering.

Key physical points to note are the 325mm overall length, 47mm pinion diameter, 48mm pinion at rest, 14mm mount hole diameter and 9.18kg weight. It is listed for wet or dry clutch use and carries a 2 year, 400,000km warranty.

Key Features

• New starter motor
• 24V electrical system
• 12 tooth pinion
• Clockwise rotation
• 5.5kW power rating
• 3 hole mount type

Specifications

• Part number: M9T61671AMA
• Brand: Mitsubishi
• Product type: Starter motor
• Voltage: 24V
• Power rating: 5.5kW
• Rotation: CW
• Number of teeth: 12
• Starter mount type: 3 hole

Confirmed fitment references

• CASE 335B
• CASE 335B 2008
• CASE 335B 2009
• CASE 335B 2010
• CASE 340B
• CASE 340B 2008
• CASE 340B 2009
• CASE 340B 2010

Application and Buying Notes

Before buying, check the part number M9T61671AMA first, then compare the 24V rating, 12 tooth pinion, clockwise rotation and 3 hole mounting arrangement with the unit you are replacing. The listed 126mm mount centres and 92mm flange diameter are useful checks when you are comparing the physical starter to the vehicle.

The application data provided shows this starter against selected CASE and IVECO models, but it should still be matched carefully to the exact vehicle variant and existing starter. Model names alone are not enough when electrical starters differ by engine setup, mounting pattern or rotation, so use the part number and the measured dimensions together.

This unit is listed as suitable for wet or dry clutch use, which broadens application coverage, but it does not remove the need to verify the original starter style. The 5.5kW rating, 47mm pinion diameter and 48mm pinion at rest are all relevant when checking interchange with the removed part.

If you are replacing a damaged starter, confirm the old unit’s label, tooth count, rotation direction and mounting layout before fitting. The 9.18kg weight and 325mm overall length can also help when comparing against the existing component in the vehicle, especially where access is tight or the original starter sits close to other engine hardware.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number M9T61671AMA helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 2 Years 400,000km, Mount Centres A 126mm, Mount Centres C 126mm, Number of Teeth 12, Pinion at Rest 48mm, Power Rating 5.5kW, Suits Unit Make Mitsubishi, New / Reman. New.

Additional published details for cross-checking include Wet / Dry Clutch Wet or Dry, Product Group 2 STARTER MOTORS, Part No. M9T61671AMA, Brand MITSUBISHI, Description Mitsubishi Starter Motor 24V 12Th CW, Flange Diameter 92mm, Mount Centres B 126mm, Mount Hole Diameter 14, Overall Length 325mm.

Mitsubishi Starter Motor 24V 12Th CW. Part number M9T61671AMA should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number M9T61671AMA, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include CASE 335B, CASE 335B 2008, CASE 335B 2009, CASE 335B 2010, IVECO EURORIDER, IVECO EURORIDER 2009. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment by matching part number M9T61671AMA, then verify the 24V specification, 12 tooth CW configuration, 3 hole mount type and all measured dimensions against the vehicle and the removed starter.

FAQ

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number M9T61671AMA is the main reference point. Listed voltage is 24. Published fitment references include CASE 335B, CASE 335B 2008, CASE 335B 2009. These details should still be checked against the original unit before ordering.

What is the voltage and power rating?

The starter is a 24V unit with a 5.5kW power rating. For this listing, part number M9T61671AMA is the main reference point. Listed voltage is 24. Published fitment references include CASE 335B, CASE 335B 2008, CASE 335B 2009. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

It has 12 teeth. For this listing, part number M9T61671AMA is the main reference point. Listed voltage is 24. Published fitment references include CASE 335B, CASE 335B 2008, CASE 335B 2009. These details should still be checked against the original unit before ordering.

What direction does it rotate?

The rotation is clockwise (CW). For this listing, part number M9T61671AMA is the main reference point. Listed voltage is 24. Published fitment references include CASE 335B, CASE 335B 2008, CASE 335B 2009. These details should still be checked against the original unit before ordering.

Which vehicles are shown in the fitment data?

The fitment data provided includes selected CASE 335B and 340B applications, plus IVECO Eurorider, Eurotech MP, Powerstar, Stralis and Trakker variants. For this listing, part number M9T61671AMA is the main reference point. Listed voltage is 24. Published fitment references include CASE 335B, CASE 335B 2008, CASE 335B 2009. These details should still be checked against the original unit before ordering.

What should I check before ordering?

Match the part number M9T61671AMA, the 24V rating, 12 tooth CW configuration, 3 hole mount type, and the listed dimensions such as 126mm mount centres and 92mm flange diameter. For this listing, part number M9T61671AMA is the main reference point. Listed voltage is 24. Published fitment references include CASE 335B, CASE 335B 2008, CASE 335B 2009. These details should still be checked against the original unit before ordering.