Delco Remy 61014400 12V 11 Tooth CW 150MT Starter Motor

Delco Remy starter motor part number 61014400 is a new 12V unit in the 150MT series with 11 teeth and clockwise rotation. It is listed as an OE product and is supplied as each, with a one year warranty and over crank protection (OCP) included.

This starter motor is described with a 7.3kW power rating, a 92mm flange diameter, and a 3 hole starter mount type. Key mounting dimensions supplied are 126mm for Mount Centres A, B and C, with a 16.5mm mount hole diameter and an overall length of 420mm.

The unit is marked for Delco applications and is noted as suitable for wet or dry clutch use. It also has insulated return, a rotatable flange, and soft start pinion engagement designed to rotate the pinion for better ring gear mesh before cranking begins.

Key Features

• OE product
• 12V starter motor
• 150MT series
• 11 tooth pinion
• Clockwise rotation (CW)
• Over crank protection (OCP) included

Specifications

• Part number: 61014400
• Brand: Delco Remy
• Type: Starter motor
• Voltage: 12V
• Power rating: 7.3kW
• Series: 150MT
• Rotation: CW
• Number of teeth: 11

Application and Buying Notes

Confirm the part number 61014400 before ordering, as this is a 12V Delco Remy 150MT starter with 11 teeth and clockwise rotation. Those details matter because starter motors must match the vehicle’s electrical setup, pinion count, rotation direction, and mounting pattern to be a proper fit.

Check the mounting measurements against the existing unit or vehicle requirements: 92mm flange diameter, 126mm mount centres across A, B and C, 16.5mm mount hole diameter, and a 3 hole starter mount type. The overall length of 420mm and the 56mm pinion diameter are also useful checks when comparing the replacement against the original starter.

Because this is a 7.3kW starter motor, it is important to compare the electrical and physical details together rather than relying on one measurement alone. A starter that matches voltage but not tooth count, flange style, or mount centres can create installation issues or incorrect engagement with the ring gear.

If you are replacing an existing starter, compare the current unit’s tag, pinion tooth count, mounting face, and overall body length. The soft start feature and rotatable flange are part of the unit’s design, but the most important buying checkpoint remains the part number and the listed dimensions.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number 61014400 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Part No. 61014400, Type STARTER MOTOR, Brand DELCO REMY, Unit of Measure EACH, Description Delco Starter Motor 12V 11Th CW 150MT, Warranty One Year, Flange Diameter 92mm, Mount Centres A 126mm, Mount Centres B 126mm, Mount Centres C 126mm.

Additional published details for cross-checking include Mount Hole Diameter 16.5, Number of Teeth 11, Overall Length 420mm, Pinion at Rest 48mm, Pinion Diameter 56mm, Power Rating 7.3kW, Rotation CW, Series 150MT, Suits Unit Make Delco, Voltage 12.

Delco Starter Motor 12V 11Th CW 150MT. Part number 61014400 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number 61014400, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

Compatibility note: Please confirm fitment by matching part number 61014400, the 12V 150MT specification, 11 tooth CW rotation, and the listed mounting dimensions against the vehicle or removed starter before purchase.

FAQ

What is the part number for this starter motor?

The part number is 61014400. For this listing, part number 61014400 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 12V starter motor. For this listing, part number 61014400 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 11 teeth. For this listing, part number 61014400 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What rotation does this starter motor have?

It is clockwise rotation, listed as CW. For this listing, part number 61014400 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What mounting details are listed?

The listed mounting details include a 92mm flange diameter, 126mm mount centres for A, B and C, a 16.5mm mount hole diameter, and a 3 hole starter mount type. For this listing, part number 61014400 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What warranty is supplied with this starter motor?

The warranty listed is one year. For this listing, part number 61014400 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.