OEX Air Conditioning Compressor 24V Direct Mount Denso 10PA17C Style CXD0046

The OEX air conditioning compressor listed here is a 24V direct mount unit in Denso 10PA17C style, part number CXD0046. It is supplied r conditioning compressor each, with a pad fitting type, a 146mm clutch diameter, and an A section pulley. For applications that require this configuration, those identifiers are the key checks before ordering.

This compressor is noted as suitable for Denso units and carries original equipment number AT163728. The listed oil capacity is 130ml and the unit weight is 6.5kg. It is a direct mount design, so the mounting style and the matching manifold arrangement need to be confirmed carefully against the vehicle or machine already in service.

The fitment information provided points to a range of John Deere machines, including dozer, loader, and tractor applications. The clear application notes mention John Deere Dozer 670B/672B and 750B/C/CII 6.8L from 01/1995 onward, Loader 655B/744H 6.8L and 12.5L from 01/1997 onward, and Tractor 444H 4045T 4.5L from 01/1997 onward. As with any compressor replacement, the part number CXD0046 and the compressor style should be checked against the existing unit before fitment.

Two important details are included with this listing: the compressor is a 10PA17C style unit, and there is a note for an 8PV version under CXD6369 or CXD0041 that uses the original manifold. That makes the mounting and manifold arrangement just as important as the voltage rating when matching the replacement to the machine.

Key Features

• 24V air conditioning compressor
• Direct mount design
• Denso 10PA17C style
• Part number CXD0046
• Original equipment number AT163728
• Pad fitting type

Specifications

• Type: Air conditioning compressor
• Voltage: 24V
• Mounting: Direct mount
• Series: 10PA17C
• Part No.: CXD0046
• Original Equipment Number: AT163728
• Clutch diameter: 146mm
• Fitting type: Pad

Confirmed fitment references

• John Deere Dozer 670B and 672B
• John Deere Dozer 750B, 750C and 750CII, 6.8L, from 01/1995 onward
• John Deere Loader 655B and 744H, 6.8L and 12.5L, from 01/1997 onward
• John Deere Tractor 444H, 4045T 4.5L, from 01/1997 onward

Application and Buying Notes

Before ordering, match the part number CXD0046, the 24V electrical requirement, and the direct mount Denso 10PA17C style against the compressor already fitted to the machine. The clutch diameter is listed at 146mm and the pulley section is A, so those details should also be checked where belt and drive alignment matter.

The note with this compressor is important: the 8PV version is CXD6369 or CXD0041 and uses the original manifold. If the existing compressor or manifold arrangement differs, a visual comparison is worth doing before installation, because direct mount compressors are sensitive to mounting layout and hose connection style.

Oil capacity is listed at 130ml, and the unit weight is 6.5kg. Those figures can help when comparing the replacement to the removed unit and when handling the compressor during installation. As always, confirm the application against the machine model, engine size, and date range provided, especially on John Deere equipment where similar model names can cover different compressor setups.

If the machine has already been converted, modified, or repaired previously, do not rely on model name alone. The safest check is to compare the existing compressor, the mounting face, the clutch and pulley details, and the part number AT163728/CXD0046 before purchase. That approach helps avoid mismatch on 24V climate control systems.

The listed warranty is two years, but warranty cover does not replace fitment checking. A compressor that matches the voltage, mounting, and style can still be wrong if the manifold or pulley arrangement differs, so verify the exact application before removal or installation work begins.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXD0046 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty Two Years, Compressor Mounting Direct Mount, Original Equipment Number AT163728, Series 10PA17C, Voltage 24, Oil Capacity 130ml, Weight 6.5kg, Product Group 1 COOLING.

Additional published details for cross-checking include Part No. CXD0046, Brand OEX, Description OEX Air Conditioning Compressor 24V Direct Mount Denso 10PA17C Style, Clutch Diameter 146mm, Fitting Type Pad, Pulley Section A, Suits Unit Make Denso, Note 10PA17C Style. 8PV version CXD6369 or CXD0041 (use original manifold), Dust Cover Y/N No.

OEX Air Conditioning Compressor 24V Direct Mount Denso 10PA17C Style. Part number CXD0046 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is A. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

Compatibility note: Confirm fitment by comparing the part number CXD0046, the 24V direct mount Denso 10PA17C style, the 146mm clutch diameter, and the manifold arrangement on the existing unit before ordering.

FAQ

What voltage is this compressor?

This compressor is listed as 24V.

What is the part number?

The listed part number is CXD0046.

What type of compressor is it?

It is an air conditioning compressor in Denso 10PA17C style with a direct mount design.

What vehicles or machines are listed for fitment?

Confirmed application notes include John Deere Dozer 670B/672B, Dozer 750B/C/CII 6.8L from 01/1995 onward, Loader 655B/744H 6.8L and 12.5L from 01/1997 onward, and Tractor 444H 4045T 4.5L from 01/1997 onward.

Does it use a pad fitting type?

Yes. The fitting type is listed as pad.

Is there a note about another version?

Yes. The note states that the 8PV version is CXD6369 or CXD0041 and uses the original manifold.