OEX Air Conditioning Compressor 24V Direct Mount MHI MSC90TA Style CXM0001

The OEX air conditioning compressor is a 24V direct mount unit in MHI MSC90TA style, supplied under part number CXM0001. It is listed as a pad fitting compressor with a 117mm clutch diameter and a 6 groove pulley section, so matching the mounting style and pulley arrangement matters when checking against the original unit.

This compressor is specified for Mitsubishi Fuso Canter applications from 06/2002 onwards with a 5.2L engine, and the fitment note supplied is to suit Mitsubishi Fuso Canter FE 5.2L 06/2002 >. That is a useful starting point, but it should still be checked against the vehicle's existing compressor, electrical system and hose arrangement before ordering.

The unit is identified as OEX brand, weighs 6.5kg, and uses PAG56 oil with a listed oil capacity of 120ml. Those details are important when comparing like-for-like replacements, especially on commercial vehicles where compressor style, voltage and mounting type need to line up with the existing air conditioning setup.

Key Features

• 24V air conditioning compressor
• Direct mount compressor design
• MHI MSC90TA style
• Pad fitting type
• 6 groove pulley section
• 117mm clutch diameter

Specifications

• Brand: OEX
• Part No.: CXM0001
• Product type: Air conditioning compressor
• Series: MSC90TA
• Voltage: 24V
• Compressor mounting: Direct mount
• Fitting type: Pad
• Pulley section: 6 groove

Confirmed fitment guidance

• Mitsubishi Fuso Canter FE 5.2L from 06/2002 onwards

Application and Buying Notes

Before ordering, compare the part number CXM0001 with the compressor currently fitted to the vehicle, then check that the unit is a 24V direct mount compressor with a pad fitting and 6 groove pulley section. Those three points are the quickest way to narrow down whether this OEX compressor matches the vehicle's existing air conditioning hardware.

The listed MHI MSC90TA style, 117mm clutch diameter and 120ml oil capacity are practical identification points, not just catalogue details. If the original compressor differs in mounting style, clutch size, pulley layout or oil requirement, it may not be the right replacement even if the vehicle is in the same model family.

This compressor is noted for Mitsubishi Fuso Canter FE 5.2L applications from 06/2002 onward. Commercial vehicle fitment can vary with build date, variant and previous repairs, so it is sensible to verify the current compressor label, connector style and hose routing against the vehicle before committing to the purchase.

PAG56 oil is specified, and the compressor is supplied without a dust cover. When replacing an air conditioning compressor, it is important to confirm the oil type and amount against the system requirements, and to make sure the surrounding components are suitable for installation on the vehicle in question.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXM0001 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty Two Years, Compressor Mounting Direct Mount, Pulley Section 6 Groove, Suits Unit Make MHI, Note Oil type PAG56., Dust Cover Y/N No, Product Group 2 AC COMPONENTS.

Additional published details for cross-checking include Part No. CXM0001, Brand OEX, Description OEX Air Conditioning Compressor 24V Direct Mount MHI MSC90TA Style, Clutch Diameter 117mm, Fitting Type Pad, Series MSC90TA, Voltage 24, Oil Capacity 120ml, Weight 6.5kg, Product Group 1 COOLING.

OEX Air Conditioning Compressor 24V Direct Mount MHI MSC90TA Style. Part number CXM0001 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXM0001, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility using part number CXM0001, the 24V direct mount pad-fit specification, the 6 groove pulley section and the Mitsubishi Fuso Canter FE 5.2L from 06/2002 onwards application before purchase.

FAQ

What vehicle is this compressor listed to suit?

It is listed to suit Mitsubishi Fuso Canter FE 5.2L applications from 06/2002 onwards. For this listing, part number CXM0001 is the main reference point. Listed voltage is 24. Published fitment references include FE8) 2002, MITSUBISHI FUSO CANTER, MITSUBISHI FUSO CANTER (FB7. These details should still be checked against the original unit before ordering.

What is the part number?

The part number supplied is CXM0001. For this listing, part number CXM0001 is the main reference point. Listed voltage is 24. Published fitment references include FE8) 2002, MITSUBISHI FUSO CANTER, MITSUBISHI FUSO CANTER (FB7. These details should still be checked against the original unit before ordering.

What voltage is this compressor?

It is a 24V compressor. For this listing, part number CXM0001 is the main reference point. Listed voltage is 24. Published fitment references include FE8) 2002, MITSUBISHI FUSO CANTER, MITSUBISHI FUSO CANTER (FB7. These details should still be checked against the original unit before ordering.

What type of mounting does it use?

It is a direct mount compressor with a pad fitting type. For this listing, part number CXM0001 is the main reference point. Listed voltage is 24. Published fitment references include FE8) 2002, MITSUBISHI FUSO CANTER, MITSUBISHI FUSO CANTER (FB7. These details should still be checked against the original unit before ordering.

What pulley setup does it have?

It has a 6 groove pulley section and a 117mm clutch diameter. For this listing, part number CXM0001 is the main reference point. Listed voltage is 24. Published fitment references include FE8) 2002, MITSUBISHI FUSO CANTER, MITSUBISHI FUSO CANTER (FB7. These details should still be checked against the original unit before ordering.

What oil specification is listed?

The listed oil type is PAG56, and the oil capacity is 120ml. For this listing, part number CXM0001 is the main reference point. Listed voltage is 24. Published fitment references include FE8) 2002, MITSUBISHI FUSO CANTER, MITSUBISHI FUSO CANTER (FB7. These details should still be checked against the original unit before ordering.