OEX Alternator 12V 150A Mitsubishi Style MXA2060

The OEX Alternator MXA2060 is a new 12V unit with a 150A power rating and Mitsubishi style mounting. It suits Mitsubishi applications and uses a twin leg alternator mount with 81mm inside mounting legs, so the mounting pattern should be checked carefully against the original unit before purchase.

This alternator is fitted with an internal regulator and a 7 groove pulley with a 65mm outside diameter. The pivot hole is M10x1.25 / 10, the adjusting hole diameter is 8mm, and the mount centre to centre measurement is 162mm. Those dimensions are the key points to confirm when comparing to the vehicle’s existing alternator.

OEX lists this unit under part number MXA2060 and pin code IR203. It is a replacement alternator for Mitsubishi style applications, but the product note also states it will not replace MXA2046 - 130Amp unit, and that the adjustment hole is not threaded. The rear mounting leg has a thread nut insert, so both the adjusting hole and rear mounting leg need to be confirmed against the original alternator.

Key Features

• 12V alternator with 150A output
• New unit, not remanufactured
• Internal regulator fitted
• Twin leg alternator mount
• 7 groove pulley, 65mm outside diameter
• OEX part number MXA2060

Specifications

• Voltage: 12V
• Power rating: 150A
• Type: Alternator
• Condition: New
• Regulator type: Internal
• Alternator mount: Twin Leg
• Inside mounting legs: 81mm
• Mount centre to centre: 162mm

Fitment details to confirm

• Suits unit make: Mitsubishi
• Part number: MXA2060
• Pin code: IR203
• Will not replace MXA2046 - 130Amp unit
• Check the adjusting hole and rear mounting leg against the original alternator
• Confirm the 81mm inside mounting legs and 162mm mount centre to centre before ordering

Application and Buying Notes

When comparing this alternator to the one already fitted, the most important checks are part number MXA2060, the Mitsubishi style mount, and the physical dimensions. The unit has 81mm inside mounting legs, 162mm mount centre to centre, an M10x1.25 / 10 pivot hole, and an 8mm adjusting hole, so those figures need to line up with the original alternator for the best chance of a correct match.

This is a 12V, 150A alternator with an internal regulator and a 7 groove pulley. That combination matters because voltage, output, pulley section, and regulator type all need to suit the vehicle’s charging system and belt setup. If the original alternator is a lower output unit, this one should still be checked against the exact application, as the note specifically says it will not replace MXA2046 - 130Amp unit.

The product note also mentions that the adjustment hole is not threaded and that the rear mounting leg has a thread nut insert. That means a visual comparison with the old alternator is worthwhile, especially around the mounting ears and adjuster area. If there is any doubt about the hardware or bracket arrangement, confirm the original unit details before fitting.

Warranty coverage is listed as 3 years for passenger use and 1 year for commercial use. The unit weighs 6.14kg and is supplied as a new alternator from OEX, a brand sourced from original equipment manufacturers and aftermarket suppliers. Even with those details, the safest approach is still to verify the replacement by part number, mount style, and measured dimensions rather than by description alone.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXA2060 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 81mm, Pivot Hole Diameter M10x1.25 / 10, Pulley Outside Diameter 65mm, Regulator Type Internal, Voltage 12, Alternator Mount Twin Leg, New / Reman. New.

Additional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. MXA2060, Brand OEX, Description OEX Alternator 12V 150A Mitsubishi Style, Adjusting Hole Diameter 8, Pin Code IR203, Power Rating (Amp) 150, Pulley Section 7 Groove, Suits Unit Make Mitsubishi.

OEX Alternator 12V 150A Mitsubishi Style. Part number MXA2060 should be checked first. Listed voltage is 12. Listed output rating is 150. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is 7 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MXA2060, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 150 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Please confirm fitment by checking part number MXA2060, the Mitsubishi style application, and the listed measurements against the original alternator before ordering. The adjustment hole, rear mounting leg, and pulley configuration should all be matched to the existing unit.

FAQ

What is the part number for this alternator?

The part number is MXA2060.

What voltage and output does this alternator have?

It is a 12V alternator with a 150A power rating.

Is this alternator new or remanufactured?

It is listed as new.

What type of regulator does it use?

It has an internal regulator.

What should I check before ordering?

Confirm MXA2060, Mitsubishi style application, 81mm inside mounting legs, 162mm mount centre to centre, M10x1.25 / 10 pivot hole, 8mm adjusting hole, and the 7 groove pulley setup against the original alternator.

Does it replace MXA2046 - 130Amp?

No. The note states it will not replace MXA2046 - 130Amp unit.