OEX Air Conditioning Compressor 12V Direct Mount Halla RS18 Style CXH0022

The OEX air conditioning compressor CXH0022 is a 12V, direct mount unit in RS18 style, set up for Halla applications. It is listed with a 6 groove pulley, 143mm clutch diameter, pad fitting type, and an oil capacity of 160ml, so the physical and electrical details can be checked against the vehicle before ordering.

This compressor is identified for Dodge Nitro KA 3.7L from 06/2007 onward. The supplied application detail is specific, and the mounting style, pulley section, voltage, and clutch diameter all need to line up with the vehicle’s existing air conditioning setup before a replacement is chosen.

It is supplied as an OEX air conditioning compressor, sold each, with a two year warranty. The unit weighs 5.1kg and has no dust cover, with HPRV noted in the product information. Those details can help when comparing the part to the removed compressor or when checking workshop requirements.

Key Features

• 12V air conditioning compressor
• Direct mount design
• Halla RS18 style
• 6 groove pulley section
• Pad fitting type
• Clutch diameter: 143mm

Specifications

• Brand: OEX
• Part number: CXH0022
• Product type: Air conditioning compressor
• Series: RS18
• Voltage: 12V
• Compressor mounting: Direct mount
• Suits unit make: Halla
• Pulley section: 6 groove

Fitment

• Dodge Nitro KA 3.7L from 06/2007 onward

Application and Buying Notes

Before buying, compare the part number CXH0022, the 12V electrical requirement, and the direct mount arrangement with the original compressor on the vehicle. A mismatch in mounting style, pulley section, or clutch diameter can stop the unit from fitting correctly even if the vehicle model is similar.

The listed application is Dodge Nitro KA 3.7L from 06/2007 onward. That is the only specific vehicle fitment detail supplied, so it should be treated as the key check point rather than assuming the compressor suits other Nitro variants or other engine combinations.

The compressor is described as Halla RS18 style with a pad fitting type and 6 groove pulley. Those are important installation details because they relate to how the unit mounts and aligns in the vehicle’s air conditioning system. Confirm the replacement compressor matches the removed unit’s visible layout before installation.

At 5.1kg, this is a substantial component and should be handled carefully during fitting. The compressor is supplied without a dust cover, so the condition of pipework, seals, and surrounding components should be checked during installation to help avoid contamination and rework.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXH0022 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty Two Years, Compressor Mounting Direct Mount, Pulley Section 6 Groove, Suits Unit Make Halla, Note HPRV., Dust Cover Y/N No, Product Group 2 AC COMPONENTS.

Additional published details for cross-checking include Part No. CXH0022, Brand OEX, Description OEX Air Conditioning Compressor 12V Direct Mount Halla RS18 Style, Clutch Diameter 143mm, Fitting Type Pad, Series RS18, Voltage 12, Oil Capacity 160ml, Weight 5.1kg, Product Group 1 COOLING.

OEX Air Conditioning Compressor 12V Direct Mount Halla RS18 Style. Part number CXH0022 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXH0022, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility using part number CXH0022, the 12V direct mount Halla RS18 style layout, and the Dodge Nitro KA 3.7L from 06/2007 onward application before ordering. If any of the mounting, pulley, clutch, or electrical details differ from the original compressor, do not assume it will be a direct replacement.

FAQ

What vehicle is this compressor listed for?

The supplied fitment is Dodge Nitro KA 3.7L from 06/2007 onward. For this listing, part number CXH0022 is the main reference point. Listed voltage is 12. Published fitment references include DODGE NITRO, DODGE NITRO 2007, DODGE NITRO 2008. These details should still be checked against the original unit before ordering.

What is the part number?

The part number is CXH0022. For this listing, part number CXH0022 is the main reference point. Listed voltage is 12. Published fitment references include DODGE NITRO, DODGE NITRO 2007, DODGE NITRO 2008. These details should still be checked against the original unit before ordering.

Is this a 12 volt compressor?

Yes. The listed voltage is 12V. For this listing, part number CXH0022 is the main reference point. Listed voltage is 12. Published fitment references include DODGE NITRO, DODGE NITRO 2007, DODGE NITRO 2008. These details should still be checked against the original unit before ordering.

What mounting style does it use?

It is listed as a direct mount compressor with pad fitting type. For this listing, part number CXH0022 is the main reference point. Listed voltage is 12. Published fitment references include DODGE NITRO, DODGE NITRO 2007, DODGE NITRO 2008. These details should still be checked against the original unit before ordering.

What pulley section does it have?

The pulley section is listed as 6 groove. For this listing, part number CXH0022 is the main reference point. Listed voltage is 12. Published fitment references include DODGE NITRO, DODGE NITRO 2007, DODGE NITRO 2008. These details should still be checked against the original unit before ordering.

Does it come with a warranty?

Yes. The listed warranty is two years. For this listing, part number CXH0022 is the main reference point. Listed voltage is 12. Published fitment references include DODGE NITRO, DODGE NITRO 2007, DODGE NITRO 2008. These details should still be checked against the original unit before ordering.