Hanon System HCC Air Conditioning Compressor 12V Direct Mount RS13 CXH079

The Hanon System HCC air conditioning compressor is a 12V direct mount unit in the RS13 series, supplied as each and identified by part number CXH079. It is listed with a 111mm clutch diameter, 6 groove pulley section, pad fitting type, and a stated oil capacity of 100cc using FD46XG oil.

This compressor is noted as suiting Mazda CX-5 KE 2.0L and 2.5L from 03/2012 onward. The listed unit make is Halla, and the product is supplied without a dust cover. These details matter because compressor mounting style, pulley groove count, and clutch size all need to match the vehicle’s air conditioning setup before fitment.

For buyers matching an A/C compressor, the most important checks are the part number CXH079, the 12V electrical specification, the direct mount configuration, and the vehicle application against Mazda CX-5 KE from March 2012 onwards. A compressor can look similar externally while still differing in mounting, pulley arrangement, or oil requirement.

Key Features

• 12V air conditioning compressor
• Direct mount configuration
• RS13 series
• 6 groove pulley section
• 111mm clutch diameter
• Pad fitting type

Specifications

• Product type: Air conditioning compressor
• Brand: Hanon System
• Part number: CXH079
• Voltage: 12V
• Series: RS13
• Compressor mounting: Direct mount
• Fitting type: Pad
• Pulley section: 6 groove

Fitment

• Mazda CX-5 KE 2.0L from 03/2012 onward
• Mazda CX-5 KE 2.5L from 03/2012 onward

Application and Buying Notes

Before ordering, compare the part number CXH079 with the compressor currently fitted to the vehicle. The confirmed application supplied here is Mazda CX-5 KE 2.0L and 2.5L from 03/2012 onward, and the compressor is a 12V direct mount RS13 unit with a 6 groove pulley section. Those points need to line up with the existing system, not just the vehicle badge.

Check the mounting style carefully. This unit is a pad-type compressor with direct mount fitment, a 111mm clutch diameter, and no dust cover. If the vehicle uses a different mounting arrangement, clutch size, or pulley count, the compressor will not be a straightforward match even if the engine size looks close.

Oil specification is another important checkpoint. The listed oil type is FD46XG and the oil capacity is 100cc. When replacing an air conditioning compressor, the oil type and quantity need to suit the system being serviced, so these details should be matched against the vehicle requirements and any associated components being replaced.

The one year warranty applies to the supplied compressor only and does not remove the need to confirm fitment before installation. A careful comparison of the part number, voltage, pulley section, clutch diameter, and Mazda CX-5 KE application will reduce the chance of ordering the wrong unit and help keep the repair process efficient.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXH079 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty One Year, Compressor Mounting Direct Mount, Pulley Section 6 Groove, Suits Unit Make Halla, Note Oil type: FD46XG, Dust Cover Y/N No, Product Group 2 AC COMPONENTS.

Additional published details for cross-checking include Part No. CXH079, Brand HANON SYSTEM, Description HCC Air Conditioning Compressor 12V Direct Mount RS13, Clutch Diameter 111mm, Fitting Type Pad, Series RS13, Voltage 12, Oil Capacity 100cc, Weight 7kg, Product Group 1 COOLING.

HCC Air Conditioning Compressor 12V Direct Mount RS13. Part number CXH079 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXH079, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment using part number CXH079, the 12V direct mount RS13 specification, the 6 groove pulley section, and the Mazda CX-5 KE 2.0L or 2.5L application from 03/2012 onward before purchase.

FAQ

What vehicle application is listed for this compressor?

The listed application is Mazda CX-5 KE 2.0L and 2.5L from 03/2012 onward. For this listing, part number CXH079 is the main reference point. Listed voltage is 12. Published fitment references include MAZDA 3, MAZDA 3 2003, MAZDA 3 2004. These details should still be checked against the original unit before ordering.

What is the part number for this compressor?

The part number listed is CXH079. For this listing, part number CXH079 is the main reference point. Listed voltage is 12. Published fitment references include MAZDA 3, MAZDA 3 2003, MAZDA 3 2004. These details should still be checked against the original unit before ordering.

What voltage is this compressor?

It is a 12V compressor. For this listing, part number CXH079 is the main reference point. Listed voltage is 12. Published fitment references include MAZDA 3, MAZDA 3 2003, MAZDA 3 2004. These details should still be checked against the original unit before ordering.

What pulley configuration is listed?

The pulley section is listed as 6 groove. For this listing, part number CXH079 is the main reference point. Listed voltage is 12. Published fitment references include MAZDA 3, MAZDA 3 2003, MAZDA 3 2004. These details should still be checked against the original unit before ordering.

What oil specification is shown?

The listed oil type is FD46XG, with an oil capacity of 100cc. For this listing, part number CXH079 is the main reference point. Listed voltage is 12. Published fitment references include MAZDA 3, MAZDA 3 2003, MAZDA 3 2004. These details should still be checked against the original unit before ordering.

Does this compressor come with a dust cover?

No, the listing states that a dust cover is not supplied. For this listing, part number CXH079 is the main reference point. Listed voltage is 12. Published fitment references include MAZDA 3, MAZDA 3 2003, MAZDA 3 2004. These details should still be checked against the original unit before ordering.