Denso Air Conditioning Compressor 12V Direct Mount 10S15C CXD6418

This Denso air conditioning compressor is a 12V direct mount unit in the 10S15C series, identified by part number CXD6418. It is supplied as an each item and uses a pad fitting type with a 7 groove pulley section and 115mm clutch diameter, so the physical mounting and drive setup need to match the vehicle before purchase.

The listed application covers Mitsubishi Fuso Bus MP35/37 7.5L from 06/2013 onwards, and Mitsubishi Fuso Canter 3.0L and 4.9L from 05/2009 onwards. There is also fitment data showing Mitsubishi Fuso models including Canter and Aero Star references across multiple years, which makes confirmation by part number and vehicle details especially important.

This compressor is specified for Denso unit applications and is noted with Pag 46 oil type. Fitting adaptors AFX9011 and AFX9012 will fit this compressor, which may be useful when matching the installation hardware to the vehicle air conditioning setup.

Key Features

• 12V air conditioning compressor
• Direct mount design
• 10S15C series
• Pad fitting type
• 7 groove pulley section
• 115mm clutch diameter

Specifications

• Brand: Denso
• Part number: CXD6418
• Product type: Air conditioning compressor
• Voltage: 12V
• Compressor mounting: Direct mount
• Fitting type: Pad
• Series: 10S15C
• Pulley section: 7 groove

Fitment guidance

• Mitsubishi Fuso Bus MP35/37 7.5L from 06/2013 onwards
• Mitsubishi Fuso Canter 3.0L from 05/2009 onwards
• Mitsubishi Fuso Canter 4.9L from 05/2009 onwards
• Additional fitment data references Mitsubishi Fuso Canter and Aero Star applications across multiple model years, including FE2, FE4, FE6 and FE8 references

Application and Buying Notes

When replacing an air conditioning compressor, the key checks are the part number CXD6418, the 12V electrical system, and the direct mount pad configuration. The 7 groove pulley section and 115mm clutch diameter must also match the belt and front-end arrangement on the vehicle, as these details affect physical compatibility.

The compressor is noted for Pag 46 oil type, and fitting adaptors AFX9011 and AFX9012 will fit this compressor. If the vehicle already has a different mounting style, pulley arrangement or adaptor requirement, it should be checked against the existing unit rather than relying on the vehicle badge alone.

This is a cooling component where correct match-up matters. Confirm the original compressor series, mounting style and connector or adaptor arrangement, and compare them with the listed 10S15C, direct mount and pad details. That approach reduces the risk of ordering the wrong compressor for a service job or repair.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXD6418 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty One Year, Compressor Mounting Direct Mount, Pulley Section 7 Groove, Suits Unit Make Denso, Note Oil Type Pag 46. Fitting adaptors AFX9011 & AFX9012 will fit this compressor, Weight 6.5kg, Product Group 1 COOLING, Part No. CXD6418.

Additional published details for cross-checking include Brand DENSO, Description Denso Air Conditioning Compressor 12V Direct Mount 10S15C, Clutch Diameter 115mm, Fitting Type Pad, Series 10S15C, Voltage 12, Dust Cover Y/N No, Product Group 2 AC COMPONENTS.

Denso Air Conditioning Compressor 12V Direct Mount 10S15C. Part number CXD6418 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is 7 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXD6418, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include FE2) 2009, FE4) 2011, FE6) 2011, FE8) 2009, FE8) 2010, FE8) 2011. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment by matching part number CXD6418, the 12V direct mount pad configuration, and the vehicle application details before buying. Where the vehicle has been modified or the original compressor has been replaced previously, compare the existing unit carefully against the listed 10S15C, 7 groove pulley and 115mm clutch specifications.

FAQ

What is the part number for this compressor?

The part number listed is CXD6418. For this listing, part number CXD6418 is the main reference point. Listed voltage is 12. Published fitment references include FE2) 2009, FE4) 2011, FE6) 2011. These details should still be checked against the original unit before ordering.

What vehicles is it listed for?

It is listed for Mitsubishi Fuso Bus MP35/37 7.5L from 06/2013 onwards, and Mitsubishi Fuso Canter 3.0L and 4.9L from 05/2009 onwards. For this listing, part number CXD6418 is the main reference point. Listed voltage is 12. Published fitment references include FE2) 2009, FE4) 2011, FE6) 2011. These details should still be checked against the original unit before ordering.

What voltage does it use?

This compressor is specified as 12V. For this listing, part number CXD6418 is the main reference point. Listed voltage is 12. Published fitment references include FE2) 2009, FE4) 2011, FE6) 2011. These details should still be checked against the original unit before ordering.

What type of mounting does it have?

It is a direct mount compressor with a pad fitting type. For this listing, part number CXD6418 is the main reference point. Listed voltage is 12. Published fitment references include FE2) 2009, FE4) 2011, FE6) 2011. These details should still be checked against the original unit before ordering.

What pulley and clutch details are listed?

The listed pulley section is 7 groove and the clutch diameter is 115mm. For this listing, part number CXD6418 is the main reference point. Listed voltage is 12. Published fitment references include FE2) 2009, FE4) 2011, FE6) 2011. These details should still be checked against the original unit before ordering.

Are any fitting adaptors noted?

Yes. Fitting adaptors AFX9011 and AFX9012 will fit this compressor. For this listing, part number CXD6418 is the main reference point. Listed voltage is 12. Published fitment references include FE2) 2009, FE4) 2011, FE6) 2011. These details should still be checked against the original unit before ordering.