Sanden Air Conditioning Compressor 24V Ear Mount SD7H15 CXSA975

This Sanden air conditioning compressor is a 24V unit in the SD7H15 series, with an ear mount layout and vertical O ring fitting type. It is identified as Part No. CXSA975 and Original Equipment Number A975, so those references are the key checks when matching a replacement for the correct application.

The compressor uses a 125mm clutch diameter, a 10 groove pulley section, and a steel armature. It is listed as weighing 7.68kg, with an oil capacity of 135ml and SP 10 oil type noted. Those details matter when comparing against the existing compressor and the vehicle’s air conditioning setup.

Fitment information supplied for this unit points to Isuzu ELF NHS, NJR, NKS, NNS and NPR 3.0L from 06/2002 onward, plus N Series NLR200/275, NLS200 and NNR200 3.0L from 11/2007 onward. Those applications should be checked carefully against the vehicle’s existing compressor, mount style and connector arrangement before ordering.

Key Features

• 24V Sanden air conditioning compressor
• SD7H15 series
• Ear mount design
• Vertical O ring fitting type
• 10 groove pulley section
• 125mm clutch diameter

Specifications

• Brand: Sanden
• Product type: Air conditioning compressor
• Part No.: CXSA975
• Original Equipment Number: A975
• Voltage: 24V
• Compressor mounting: Ear mount
• Series: SD7H15
• Fitting type: Vertical O ring

Verified fitment references

• Isuzu ELF NHS, NJR, NKS, NNS and NPR 3.0L from 06/2002 onward
• Isuzu N Series NLR200/275, NLS200 and NNR200 3.0L from 11/2007 onward

Application and Buying Notes

When replacing an air conditioning compressor, the safest match is the part number and configuration already on the vehicle. For this unit, the key identifiers are CXSA975, Original Equipment Number A975, 24V operation, SD7H15 series, ear mount layout and vertical O ring fitting type. If any of those do not line up with the existing compressor, the part should be checked again before fitting.

The pulley and clutch details also need to match the vehicle. This compressor has a 10 groove pulley section and a 125mm clutch diameter, which are practical checks when comparing against the removed unit. The mount style, head code JE Head, and the fact that no dust cover is listed are additional points to verify where access or packaging is tight.

The fitment references supplied for this compressor are specific to certain Isuzu ELF and N Series 3.0L applications over defined date ranges. That is helpful, but it is not the same as confirming the exact vehicle. Matching engine, year range, mount type and the existing compressor details is still important, especially on commercial vehicles where similar-looking parts can differ in pulley, head or line arrangement.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXSA975 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty One Year, Compressor Mounting Ear Mount, Original Equipment Number A975, Series SD7H15, Voltage 24, Armature Type Steel Armature, Dust Cover Y/N No, Weight 7.68kg.

Additional published details for cross-checking include Product Group 1 COOLING, Part No. CXSA975, Brand SANDEN, Description Sanden Air Conditioning Compressor 24V Ear Mount SD7H15, Clutch Diameter 125mm, Fitting Type Vertical O Ring, Pulley Section 10 Groove, Suits Unit Make Sanden, Note O Rings to suit ORX008 & ORX010 . Oil Type SP 10, Oil Capacity 135ml.

Sanden Air Conditioning Compressor 24V Ear Mount SD7H15. Part number CXSA975 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is 10 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXSA975, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include ISUZU ELF, ISUZU ELF 2006, ISUZU ELF 2007, ISUZU ELF 2008. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Please confirm compatibility using Part No. CXSA975, Original Equipment Number A975, 24V specification, SD7H15 series, ear mount layout and the vehicle’s existing compressor details before purchase.

FAQ

What is the part number for this compressor?

The listed part number is CXSA975. The Original Equipment Number shown is A975. For this listing, part number CXSA975 is the main reference point. Listed voltage is 24. Published fitment references include ISUZU ELF, ISUZU ELF 2006, ISUZU ELF 2007. These details should still be checked against the original unit before ordering.

What voltage is this compressor?

This is a 24V air conditioning compressor. For this listing, part number CXSA975 is the main reference point. Listed voltage is 24. Published fitment references include ISUZU ELF, ISUZU ELF 2006, ISUZU ELF 2007. These details should still be checked against the original unit before ordering.

What vehicle applications are listed for this part?

The supplied fitment references point to Isuzu ELF NHS, NJR, NKS, NNS and NPR 3.0L from 06/2002 onward, and N Series NLR200/275, NLS200 and NNR200 3.0L from 11/2007 onward. For this listing, part number CXSA975 is the main reference point. Listed voltage is 24. Published fitment references include ISUZU ELF, ISUZU ELF 2006, ISUZU ELF 2007. These details should still be checked against the original unit before ordering.

What type of mounting does it use?

It is listed as an ear mount compressor. For this listing, part number CXSA975 is the main reference point. Listed voltage is 24. Published fitment references include ISUZU ELF, ISUZU ELF 2006, ISUZU ELF 2007. These details should still be checked against the original unit before ordering.

What pulley and clutch details are provided?

The compressor has a 10 groove pulley section and a 125mm clutch diameter. For this listing, part number CXSA975 is the main reference point. Listed voltage is 24. Published fitment references include ISUZU ELF, ISUZU ELF 2006, ISUZU ELF 2007. These details should still be checked against the original unit before ordering.

Does it include warranty information?

Yes. A one year warranty is listed. For this listing, part number CXSA975 is the main reference point. Listed voltage is 24. Published fitment references include ISUZU ELF, ISUZU ELF 2006, ISUZU ELF 2007. These details should still be checked against the original unit before ordering.