Red Dot Air Conditioning TX Valve Block Pad 2 Ton TXX0918

The Red Dot Air Conditioning TX valve block pad is a 2 ton TX valve with a block style body and pad configuration, identified by part number TXX0918. It is listed with #6 inlet fitting, #8 outlet fitting, #10 suction inlet fitting and #12 suction outlet fitting, so the connection sizes can be checked before ordering.

This valve is supplied as an each item and carries a one year warranty. The published weight is 0.24kg, and the dimensional note lists inlet 8.60mm, outlet 11.60mm, suction inlet 14.60mm and suction outlet 17.70mm, which gives a practical reference point for confirming the refrigerant line setup on the machine.

Fitment information supplied with the product points to John Deere agricultural and mining applications from 1996 onwards. That makes the part number and fitting sizes especially important when matching the valve to an existing air conditioning system, particularly on equipment where the same model family may use more than one arrangement.

Key Features

• Red Dot TX valve block pad style
• 2 ton rating
• Part number TXX0918
• #6 inlet fitting
• #8 outlet fitting
• #10 suction inlet fitting

Specifications

• Brand: Red Dot
• Product type: Air conditioning TX valve
• TX type: Block
• TX style: Block - Pad
• Tonnage: 2
• Unit of measure: Each
• Part no.: TXX0918
• Outlet fitting: #8

Fitment Guidance

• John Deere agricultural and mining applications from 1996 onwards
• John Deere 300D
• John Deere 310D
• John Deere 310E
• John Deere 310G
• John Deere 310J
• John Deere 310SE
• John Deere 310SG

Application and Buying Notes

When matching a TX valve, the most useful checks are the part number, the valve style and the fitting sizes. This Red Dot unit is TXX0918, block - pad style, with #6 inlet, #8 outlet, #10 suction inlet and #12 suction outlet fittings, so it should only be considered where those details align with the existing air conditioning hardware.

The printed millimetre sizes are useful if you are checking hose ends, adapters or the original valve body before removal. Inlet 8.60mm, outlet 11.60mm, suction inlet 14.60mm and suction outlet 17.70mm provide a direct reference for confirming whether the plumbing matches this replacement part.

If you are replacing a failed valve, it is still worth comparing the original unit against the new one before fitting. On climate control components, a correct-looking part number and the right fitting sizes are usually the safest starting point, but final confirmation should always be made against the machine application and the existing assembly.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number TXX0918 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING TX VALVE, Unit of Measure EACH, Warranty One Year, Outlet Fitting #8, Tonnage 2, Note Inlet: (8.60mm) Outlet: (11.60mm) Suction Inlet: (14.60mm) Suction Outlet: (17.70mm), TX Style Block - Pad, Product Group 2 AC COMPONENTS, Part No. TXX0918.

Additional published details for cross-checking include Brand REDDOT, Description Red Dot Air Conditioning TX Valve Block Pad 2 Ton, Inlet Fitting #6, Suction Inlet Fitting #10, TX Type Block, Suction Outlet Fitting #12, Weight .24kg, Product Group 1 COOLING.

Red Dot Air Conditioning TX Valve Block Pad 2 Ton. Part number TXX0918 should be checked first. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number TXX0918, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning tx valve in workshop, fleet, trade, agricultural, or construction service, the listed electrical specification should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include JOHN DEERE 300D, JOHN DEERE 300D 2006, JOHN DEERE 300D 2007, JOHN DEERE 310D. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm fitment using part number TXX0918, the block - pad TX style, the 2 ton rating and the listed fitting sizes before ordering. Where the machine application is in the John Deere agricultural and mining range from 1996 onwards, check the existing valve and pipe connections carefully to ensure the replacement matches the original setup.

FAQ

What is the part number for this Red Dot TX valve?

The part number is TXX0918. For this listing, part number TXX0918 is the main reference point. Published fitment references include JOHN DEERE 300D, JOHN DEERE 300D 2006, JOHN DEERE 300D 2007. These details should still be checked against the original unit before ordering.

What style of TX valve is it?

It is a block style TX valve with a pad configuration, listed as TX type Block and TX style Block - Pad. For this listing, part number TXX0918 is the main reference point. Published fitment references include JOHN DEERE 300D, JOHN DEERE 300D 2006, JOHN DEERE 300D 2007. These details should still be checked against the original unit before ordering.

What tonnage is this valve rated for?

It is listed as a 2 ton TX valve. For this listing, part number TXX0918 is the main reference point. Published fitment references include JOHN DEERE 300D, JOHN DEERE 300D 2006, JOHN DEERE 300D 2007. These details should still be checked against the original unit before ordering.

What fittings are listed on this valve?

The listed fittings are #6 inlet, #8 outlet, #10 suction inlet and #12 suction outlet. For this listing, part number TXX0918 is the main reference point. Published fitment references include JOHN DEERE 300D, JOHN DEERE 300D 2006, JOHN DEERE 300D 2007. These details should still be checked against the original unit before ordering.

What vehicles or equipment is it listed to suit?

It is listed to suit John Deere agricultural and mining applications from 1996 onwards. For this listing, part number TXX0918 is the main reference point. Published fitment references include JOHN DEERE 300D, JOHN DEERE 300D 2006, JOHN DEERE 300D 2007. These details should still be checked against the original unit before ordering.

Does it come with a warranty?

Yes. The listed warranty is one year. For this listing, part number TXX0918 is the main reference point. Published fitment references include JOHN DEERE 300D, JOHN DEERE 300D 2006, JOHN DEERE 300D 2007. These details should still be checked against the original unit before ordering.